FAILED: patch "[PATCH] net: dsa: realtek: use gpiod_set_value_cansleep for reset" failed to apply to 5.15-stable tree

FAILED: patch "[PATCH] net: dsa: realtek: use gpiod_set_value_cansleep for reset" failed to apply to 5.15-stable tree

[gregkh]

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x fb58b6a696b30bcbfbe0cfc0a91b19c816a955fc
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090351-frail-oil-2778@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From fb58b6a696b30bcbfbe0cfc0a91b19c816a955fc Mon Sep 17 00:00:00 2001
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
Date: Fri, 14 Aug 2026 13:01:02 +0200
Subject: [PATCH] net: dsa: realtek: use gpiod_set_value_cansleep for reset
 GPIO
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical.  When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:

  WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
  Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
  Workqueue: events_unbound deferred_probe_work_func
  pc : gpiod_set_value+0x44/0x80
  lr : rtl83xx_probe+0x1d8/0x3a0
  Call trace:
   gpiod_set_value+0x44/0x80 (P)
   rtl83xx_probe+0x1d8/0x3a0
   realtek_mdio_probe+0x24/0xa0
   mdio_probe+0x38/0x78
   really_probe+0xc4/0x3e0
   __driver_probe_device+0x15c/0x1b8
   driver_probe_device+0xb4/0x120
   __device_attach_driver+0xb8/0x1a0
   bus_for_each_drv+0x88/0xf0
   __device_attach+0xa0/0x1d8
   device_initial_probe+0x54/0x68
   bus_probe_device+0x38/0xa0
   deferred_probe_work_func+0xb8/0x120
   process_one_work+0x184/0x4e8
   worker_thread+0x188/0x308
   kthread+0x130/0x150
   ret_from_fork+0x10/0x20

Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
be used without triggering the warning.

The reset GPIO has been driven with the non-sleeping gpiod_set_value()
since the driver was added in v4.19.  The call has since been refactored
across several files - from realtek-smi.c / realtek-mdio.c into the common
rtl83xx.c module and then into the rtl83xx_reset_assert() and
rtl83xx_reset_deassert() helpers (both in v6.9).  This patch therefore
applies as-is only to kernels that carry those helpers (v6.9+); older
stable kernels need the same gpiod_set_value_cansleep() conversion at the
corresponding open-coded call sites.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: <stable@vger.kernel.org> # 6.9.x
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260814110102.2362246-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c
index 9dd50b20c000..d2e92bab55d2 100644
--- a/drivers/net/dsa/realtek/rtl83xx.c
+++ b/drivers/net/dsa/realtek/rtl83xx.c
@@ -321,7 +321,7 @@ void rtl83xx_reset_assert(struct realtek_priv *priv)
 			 "Failed to assert the switch reset control: %pe\n",
 			 ERR_PTR(ret));
 
-	gpiod_set_value(priv->reset, true);
+	gpiod_set_value_cansleep(priv->reset, true);
 }
 
 void rtl83xx_reset_deassert(struct realtek_priv *priv)
@@ -334,7 +334,7 @@ void rtl83xx_reset_deassert(struct realtek_priv *priv)
 			 "Failed to deassert the switch reset control: %pe\n",
 			 ERR_PTR(ret));
 
-	gpiod_set_value(priv->reset, false);
+	gpiod_set_value_cansleep(priv->reset, false);
 }
 
 /**

[PATCH 5.15.y] net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO

[Sasha Levin]

From: Ahmad Fatoum <a.fatoum@pengutronix.de>

[ Upstream commit fb58b6a696b30bcbfbe0cfc0a91b19c816a955fc ]

rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical.  When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:

  WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
  Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
  Workqueue: events_unbound deferred_probe_work_func
  pc : gpiod_set_value+0x44/0x80
  lr : rtl83xx_probe+0x1d8/0x3a0
  Call trace:
   gpiod_set_value+0x44/0x80 (P)
   rtl83xx_probe+0x1d8/0x3a0
   realtek_mdio_probe+0x24/0xa0
   mdio_probe+0x38/0x78
   really_probe+0xc4/0x3e0
   __driver_probe_device+0x15c/0x1b8
   driver_probe_device+0xb4/0x120
   __device_attach_driver+0xb8/0x1a0
   bus_for_each_drv+0x88/0xf0
   __device_attach+0xa0/0x1d8
   device_initial_probe+0x54/0x68
   bus_probe_device+0x38/0xa0
   deferred_probe_work_func+0xb8/0x120
   process_one_work+0x184/0x4e8
   worker_thread+0x188/0x308
   kthread+0x130/0x150
   ret_from_fork+0x10/0x20

Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
be used without triggering the warning.

The reset GPIO has been driven with the non-sleeping gpiod_set_value()
since the driver was added in v4.19.  The call has since been refactored
across several files - from realtek-smi.c / realtek-mdio.c into the common
rtl83xx.c module and then into the rtl83xx_reset_assert() and
rtl83xx_reset_deassert() helpers (both in v6.9).  This patch therefore
applies as-is only to kernels that carry those helpers (v6.9+); older
stable kernels need the same gpiod_set_value_cansleep() conversion at the
corresponding open-coded call sites.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: <stable@vger.kernel.org> # 6.9.x
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260814110102.2362246-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ adapted rtl83xx.c reset helper changes to direct GPIO calls in realtek-smi-core.c probe and remove callbacks. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/realtek-smi-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c
index 2fcfd917b876b..f84d4772e946e 100644
--- a/drivers/net/dsa/realtek-smi-core.c
+++ b/drivers/net/dsa/realtek-smi-core.c
@@ -425,7 +425,7 @@ static int realtek_smi_probe(struct platform_device *pdev)
 		return PTR_ERR(smi->reset);
 	}
 	msleep(REALTEK_SMI_HW_STOP_DELAY);
-	gpiod_set_value(smi->reset, 0);
+	gpiod_set_value_cansleep(smi->reset, 0);
 	msleep(REALTEK_SMI_HW_START_DELAY);
 	dev_info(dev, "deasserted RESET\n");
 
@@ -472,7 +472,7 @@ static int realtek_smi_remove(struct platform_device *pdev)
 	dsa_unregister_switch(smi->ds);
 	if (smi->slave_mii_bus)
 		of_node_put(smi->slave_mii_bus->dev.of_node);
-	gpiod_set_value(smi->reset, 1);
+	gpiod_set_value_cansleep(smi->reset, 1);
 
 	platform_set_drvdata(pdev, NULL);
 
-- 
2.53.0