FAILED: patch "[PATCH] EDAC/altera: Use parent device for devres in" failed to apply to 6.12-stable tree

FAILED: patch "[PATCH] EDAC/altera: Use parent device for devres in" failed to apply to 6.12-stable tree

[gregkh]

The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 9868f5c077dfe0b606331f2e782484f91a5789a5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026091619-brownnose-rake-f034@gregkh' --subject-prefix 'PATCH 6.12.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 9868f5c077dfe0b606331f2e782484f91a5789a5 Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <dinguyen@kernel.org>
Date: Wed, 17 Jun 2026 11:43:03 -0500
Subject: [PATCH] EDAC/altera: Use parent device for devres in
 altr_portb_setup()

Anchor the devres group and the devm-managed IRQ requests in altr_portb_setup()
to the actual parent device (device->edac->dev) instead of the embedded struct
device inside the copied per-port altr_edac_device_dev.

This keeps devres_open_group(), devm_request_irq(), devres_remove_group() and
devres_release_group() all referring to the same long-lived device so the
group and the resources allocated inside it are torn down together.

Fixes: 911049845d70 ("EDAC, altera: Add Arria10 SD-MMC EDAC support")
Closes: https://sashiko.dev/#/patchset/20260503212558.2811480-1-dbgh9129%40gmail.com
Assisted-by: LLM
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260617164303.585555-1-dinguyen@kernel.org

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 1d1e2b5ca14c..68846f583eee 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1534,7 +1534,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	altdev = dci->pvt_info;
 	*altdev = *device;
 
-	if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
+	if (!devres_open_group(device->edac->dev, altr_portb_setup, GFP_KERNEL))
 		return -ENOMEM;
 
 	/* Update PortB specific values */
@@ -1562,7 +1562,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 		rc = -ENODEV;
 		goto err_release_group_1;
 	}
-	rc = devm_request_irq(&altdev->ddev, altdev->sb_irq,
+	rc = devm_request_irq(device->edac->dev, altdev->sb_irq,
 			      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
 			      ecc_name, altdev);
 	if (rc) {
@@ -1584,7 +1584,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 			rc = -ENODEV;
 			goto err_release_group_1;
 		}
-		rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+		rc = devm_request_irq(device->edac->dev, altdev->db_irq,
 				      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
 				      ecc_name, altdev);
 		if (rc) {
@@ -1604,13 +1604,13 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 
 	list_add(&altdev->next, &altdev->edac->a10_ecc_devices);
 
-	devres_remove_group(&altdev->ddev, altr_portb_setup);
+	devres_remove_group(device->edac->dev, altr_portb_setup);
 
 	return 0;
 
 err_release_group_1:
 	edac_device_free_ctl_info(dci);
-	devres_release_group(&altdev->ddev, altr_portb_setup);
+	devres_release_group(device->edac->dev, altr_portb_setup);
 	edac_printk(KERN_ERR, EDAC_DEVICE,
 		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
 	return rc;

[PATCH 6.12.y 1/2] EDAC/altera: Use ECC manager compatible to select A10/S10 IRQ layout

[Sasha Levin]

From: Rounak Das <rounakdas2025@gmail.com>

[ Upstream commit d4486fc3098e176cb4a29fee037216484761f9ca ]

The SDMMC ECC IRQ layout selection uses CONFIG_64BIT to distinguish between
Arria10 and Stratix10 paths.

Detect the SoC once at probe via the device match table (.data) store it in
struct altr_arria10_edac, and use it instead of CONFIG_64BIT.

This keeps the decision correct for every ECC child device (OCRAM, SD/MMC,
etc.) and avoids any runtime compatible lookup.

Signed-off-by: Rounak Das <rounakdas2025@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20260708091135.94114-2-rounakdas2025@gmail.com
Stable-dep-of: 9868f5c077df ("EDAC/altera: Use parent device for devres in altr_portb_setup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/altera_edac.c | 107 +++++++++++++++++++------------------
 drivers/edac/altera_edac.h |   1 +
 2 files changed, 55 insertions(+), 53 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 6c5fb06976415..b7325d4a2dbbb 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1507,6 +1507,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	int edac_idx, rc;
 	struct device_node *np;
 	const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;
+	bool is_s10 = device->edac->is_s10;
 
 	rc = altr_check_ecc_deps(device);
 	if (rc)
@@ -1548,15 +1549,14 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 
 	/*
 	 * Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly
-	 *
-	 * FIXME: Instead of ifdefs with different architectures the driver
-	 *        should properly use compatibles.
 	 */
-#ifdef CONFIG_64BIT
-	altdev->sb_irq = irq_of_parse_and_map(np, 1);
-#else
-	altdev->sb_irq = irq_of_parse_and_map(np, 2);
-#endif
+
+	/* Using compatibles to determine the IRQ Index */
+	if (is_s10)
+		altdev->sb_irq = irq_of_parse_and_map(np, 1);
+	else
+		altdev->sb_irq = irq_of_parse_and_map(np, 2);
+
 	if (!altdev->sb_irq) {
 		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
 		rc = -ENODEV;
@@ -1570,29 +1570,28 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 		goto err_release_group_1;
 	}
 
-#ifdef CONFIG_64BIT
-	/* Use IRQ to determine SError origin instead of assigning IRQ */
-	rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE,
-			    "Error PortB DBIRQ alloc\n");
-		goto err_release_group_1;
-	}
-#else
-	altdev->db_irq = irq_of_parse_and_map(np, 3);
-	if (!altdev->db_irq) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
-		rc = -ENODEV;
-		goto err_release_group_1;
-	}
-	rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
-			      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
-			      ecc_name, altdev);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
-		goto err_release_group_1;
+	if (is_s10) {
+		/* Use IRQ to determine SError origin instead of assigning IRQ */
+		rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+			goto err_release_group_1;
+		}
+	} else {
+		altdev->db_irq = irq_of_parse_and_map(np, 3);
+		if (!altdev->db_irq) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+			rc = -ENODEV;
+			goto err_release_group_1;
+		}
+		rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+				      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
+				      ecc_name, altdev);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
+			goto err_release_group_1;
+		}
 	}
-#endif
 
 	rc = edac_device_add_device(dci);
 	if (rc) {
@@ -1974,29 +1973,29 @@ static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
 		goto err_release_group1;
 	}
 
-#ifdef CONFIG_64BIT
-	/* Use IRQ to determine SError origin instead of assigning IRQ */
-	rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE,
-			    "Unable to parse DB IRQ index\n");
-		goto err_release_group1;
-	}
-#else
-	altdev->db_irq = irq_of_parse_and_map(np, 1);
-	if (!altdev->db_irq) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
-		rc = -ENODEV;
-		goto err_release_group1;
-	}
-	rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
-			      IRQF_TRIGGER_HIGH,
-			      ecc_name, altdev);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
-		goto err_release_group1;
+	if (edac->is_s10) {
+		/* Use IRQ to determine SError origin instead of assigning IRQ */
+		rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "Unable to parse DB IRQ index\n");
+			goto err_release_group1;
+		}
+	} else {
+		altdev->db_irq = irq_of_parse_and_map(np, 1);
+		if (!altdev->db_irq) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
+			rc = -ENODEV;
+			goto err_release_group1;
+		}
+		rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
+				      IRQF_TRIGGER_HIGH,
+				      ecc_name, altdev);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
+			goto err_release_group1;
+		}
 	}
-#endif
 
 	rc = edac_device_add_device(dci);
 	if (rc) {
@@ -2122,6 +2121,8 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, edac);
 	INIT_LIST_HEAD(&edac->a10_ecc_devices);
 
+	edac->is_s10 = !!device_get_match_data(&pdev->dev);
+
 	edac->ecc_mgr_map =
 		altr_sysmgr_regmap_lookup_by_phandle(pdev->dev.of_node,
 						     "altr,sysmgr-syscon");
@@ -2207,7 +2208,7 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 
 static const struct of_device_id altr_edac_a10_of_match[] = {
 	{ .compatible = "altr,socfpga-a10-ecc-manager" },
-	{ .compatible = "altr,socfpga-s10-ecc-manager" },
+	{ .compatible = "altr,socfpga-s10-ecc-manager", .data = (void *)1 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, altr_edac_a10_of_match);
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index 7248d24c4908d..5b26ef0cfe600 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -395,6 +395,7 @@ struct altr_arria10_edac {
 	struct irq_chip		irq_chip;
 	struct list_head	a10_ecc_devices;
 	struct notifier_block	panic_notifier;
+	bool is_s10;
 };
 
 #endif	/* #ifndef _ALTERA_EDAC_H */
-- 
2.53.0

[PATCH 6.12.y 2/2] EDAC/altera: Use parent device for devres in altr_portb_setup()

[Sasha Levin]

From: Dinh Nguyen <dinguyen@kernel.org>

[ Upstream commit 9868f5c077dfe0b606331f2e782484f91a5789a5 ]

Anchor the devres group and the devm-managed IRQ requests in altr_portb_setup()
to the actual parent device (device->edac->dev) instead of the embedded struct
device inside the copied per-port altr_edac_device_dev.

This keeps devres_open_group(), devm_request_irq(), devres_remove_group() and
devres_release_group() all referring to the same long-lived device so the
group and the resources allocated inside it are torn down together.

Fixes: 911049845d70 ("EDAC, altera: Add Arria10 SD-MMC EDAC support")
Closes: https://sashiko.dev/#/patchset/20260503212558.2811480-1-dbgh9129%40gmail.com
Assisted-by: LLM
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260617164303.585555-1-dinguyen@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/altera_edac.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index b7325d4a2dbbb..ef99e59c73245 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1534,7 +1534,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	altdev = dci->pvt_info;
 	*altdev = *device;
 
-	if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
+	if (!devres_open_group(device->edac->dev, altr_portb_setup, GFP_KERNEL))
 		return -ENOMEM;
 
 	/* Update PortB specific values */
@@ -1562,7 +1562,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 		rc = -ENODEV;
 		goto err_release_group_1;
 	}
-	rc = devm_request_irq(&altdev->ddev, altdev->sb_irq,
+	rc = devm_request_irq(device->edac->dev, altdev->sb_irq,
 			      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
 			      ecc_name, altdev);
 	if (rc) {
@@ -1584,7 +1584,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 			rc = -ENODEV;
 			goto err_release_group_1;
 		}
-		rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+		rc = devm_request_irq(device->edac->dev, altdev->db_irq,
 				      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
 				      ecc_name, altdev);
 		if (rc) {
@@ -1604,13 +1604,13 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 
 	list_add(&altdev->next, &altdev->edac->a10_ecc_devices);
 
-	devres_remove_group(&altdev->ddev, altr_portb_setup);
+	devres_remove_group(device->edac->dev, altr_portb_setup);
 
 	return 0;
 
 err_release_group_1:
 	edac_device_free_ctl_info(dci);
-	devres_release_group(&altdev->ddev, altr_portb_setup);
+	devres_release_group(device->edac->dev, altr_portb_setup);
 	edac_printk(KERN_ERR, EDAC_DEVICE,
 		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
 	return rc;
-- 
2.53.0