* [PATCH v2 1/2] spi: spi-ti-qspi: finalize message on transfer error
[not found] <20261103225116.3624270-1-jctchan@gmail.com>
@ 2026-11-03 22:51 ` Joseph CT Chan
0 siblings, 0 replies; only message in thread
From: Joseph CT Chan @ 2026-11-03 22:51 UTC (permalink / raw)
To: Mark Brown
Cc: linux-spi, David Lechner, Bart Van Assche, Joseph CT Chan, stable
From: Joseph CT Chan <josephctchan@google.com>
When ti_qspi_start_transfer_one() hits an error in qspi_transfer_msg(),
such as a transfer timeout (-ETIMEDOUT), it unlocks qspi->list_lock and
returns ret directly without writing QSPI_INVAL to QSPI_SPI_CMD_REG,
setting m->status, or calling spi_finalize_current_message(host).
Because the message is never finalized, spi_sync() or the spi_async()
callback waits forever on queued transfers. If spi_sync() took the
no-queue path, it returns -EINPROGRESS instead of the error, and the
message's optimize state is never released. The frame is also left
open, because the QSPI_INVAL write that ends it is skipped.
Set status to the transfer error and leave the transfer loop, so the
error goes through the existing tail: unlock list_lock, write
QSPI_INVAL, set m->status, and finalize the message. This fixes both
paths, and the caller now gets the error from qspi_transfer_msg()
instead of -EINVAL or -EINPROGRESS.
Tested at runtime with KUnit (spi_ti_qspi, ti_qspi_test, added later in
this series) by injecting a QSPI_SPI_STATUS_REG WC poll timeout
(-ETIMEDOUT) via logic_iomem emulated MMIO on ARCH=um.
Developed with help from the Claude and Gemini AI assistants.
Fixes: 505a14954e2d ("spi/qspi: Add qspi flash controller")
Cc: stable@vger.kernel.org
Signed-off-by: Joseph CT Chan <josephctchan@google.com>
---
drivers/spi/spi-ti-qspi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 091a8b8842f5..7360ee6bd122 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -708,8 +708,8 @@ static int ti_qspi_start_transfer_one(struct spi_controller *host,
ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
if (ret) {
dev_dbg(qspi->dev, "transfer message failed\n");
- mutex_unlock(&qspi->list_lock);
- return -EINVAL;
+ status = ret;
+ break;
}
m->actual_length += transfer_len_words * wlen;
--
2.56.0.385.gac671c819a-goog
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-03 22:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20261103225116.3624270-1-jctchan@gmail.com>
2026-11-03 22:51 ` [PATCH v2 1/2] spi: spi-ti-qspi: finalize message on transfer error Joseph CT Chan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox