* [PATCH 3/4] arm64: dts: cix: fix I2C bus address and size cells on Sky1 [not found] <20261104051055.3020004-1-gary.yang@cixtech.com> @ 2026-11-04 5:10 ` Gary Yang 0 siblings, 0 replies; 3+ messages in thread From: Gary Yang @ 2026-11-04 5:10 UTC (permalink / raw) To: Fugang Duan; +Cc: CIX Linux Kernel Upstream Group, Gary Yang, stable The I2C controller nodes inherit #address-cells = <2> and #size-cells = <2> from the soc@0 bus, but I2C child devices always use a single-cell address and no size. With the inherited values every child node triggers a reg_format warning, and a device described on the bus would be decoded with the wrong address layout. Set #address-cells = <1> and #size-cells = <0> on all eight I2C controllers, matching the I3C nodes that already do so. Fixes: fad32e8ac460 ("arm64: dts: cix: add DT nodes for all I2C and I3C ports for sky1") Cc: stable@vger.kernel.org Signed-off-by: Gary Yang <gary.yang@cixtech.com> --- arch/arm64/boot/dts/cix/sky1.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi index 0a820f45feb9..a18e8fd43fcf 100644 --- a/arch/arm64/boot/dts/cix/sky1.dtsi +++ b/arch/arm64/boot/dts/cix/sky1.dtsi @@ -290,6 +290,8 @@ soc@0 { i2c0: i2c@4010000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04010000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C0_APB>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH 0>; @@ -299,6 +301,8 @@ i2c0: i2c@4010000 { i2c1: i2c@4020000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04020000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C1_APB>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH 0>; @@ -308,6 +312,8 @@ i2c1: i2c@4020000 { i2c2: i2c@4030000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04030000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C2_APB>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH 0>; @@ -317,6 +323,8 @@ i2c2: i2c@4030000 { i2c3: i2c@4040000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04040000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C3_APB>; interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; @@ -326,6 +334,8 @@ i2c3: i2c@4040000 { i2c4: i2c@4050000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04050000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C4_APB>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH 0>; @@ -335,6 +345,8 @@ i2c4: i2c@4050000 { i2c5: i2c@4060000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04060000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C5_APB>; interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH 0>; @@ -344,6 +356,8 @@ i2c5: i2c@4060000 { i2c6: i2c@4070000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04070000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C6_APB>; interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH 0>; @@ -353,6 +367,8 @@ i2c6: i2c@4070000 { i2c7: i2c@4080000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04080000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C7_APB>; interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>; -- 2.50.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
[parent not found: <20261107011012.3655873-1-gary.yang@cixtech.com>]
* [PATCH 3/4] arm64: dts: cix: fix I2C bus address and size cells on Sky1 [not found] <20261107011012.3655873-1-gary.yang@cixtech.com> @ 2026-11-07 1:10 ` Gary Yang 2026-11-07 10:53 ` Krzysztof Kozlowski 0 siblings, 1 reply; 3+ messages in thread From: Gary Yang @ 2026-11-07 1:10 UTC (permalink / raw) To: Heikki Krogerus, Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Fugang Duan Cc: linux-usb, devicetree, linux-arm-kernel, linux-kernel, cix-kernel-upstream, gary.yang, stable The I2C controller nodes inherit #address-cells = <2> and #size-cells = <2> from the soc@0 bus, but I2C child devices always use a single-cell address and no size. With the inherited values every child node triggers a reg_format warning, and a device described on the bus would be decoded with the wrong address layout. Set #address-cells = <1> and #size-cells = <0> on all eight I2C controllers, matching the I3C nodes that already do so. Fixes: fad32e8ac460 ("arm64: dts: cix: add DT nodes for all I2C and I3C ports for sky1") Cc: stable@vger.kernel.org Signed-off-by: Gary Yang <gary.yang@cixtech.com> --- arch/arm64/boot/dts/cix/sky1.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi index 0a820f45feb9..a18e8fd43fcf 100644 --- a/arch/arm64/boot/dts/cix/sky1.dtsi +++ b/arch/arm64/boot/dts/cix/sky1.dtsi @@ -290,6 +290,8 @@ soc@0 { i2c0: i2c@4010000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04010000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C0_APB>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH 0>; @@ -299,6 +301,8 @@ i2c0: i2c@4010000 { i2c1: i2c@4020000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04020000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C1_APB>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH 0>; @@ -308,6 +312,8 @@ i2c1: i2c@4020000 { i2c2: i2c@4030000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04030000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C2_APB>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH 0>; @@ -317,6 +323,8 @@ i2c2: i2c@4030000 { i2c3: i2c@4040000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04040000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C3_APB>; interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; @@ -326,6 +334,8 @@ i2c3: i2c@4040000 { i2c4: i2c@4050000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04050000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C4_APB>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH 0>; @@ -335,6 +345,8 @@ i2c4: i2c@4050000 { i2c5: i2c@4060000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04060000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C5_APB>; interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH 0>; @@ -344,6 +356,8 @@ i2c5: i2c@4060000 { i2c6: i2c@4070000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04070000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C6_APB>; interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH 0>; @@ -353,6 +367,8 @@ i2c6: i2c@4070000 { i2c7: i2c@4080000 { compatible = "cdns,i2c-r1p14"; reg = <0x0 0x04080000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <400000>; clocks = <&scmi_clk CLK_TREE_FCH_I2C7_APB>; interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>; -- 2.50.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 3/4] arm64: dts: cix: fix I2C bus address and size cells on Sky1 2026-11-07 1:10 ` Gary Yang @ 2026-11-07 10:53 ` Krzysztof Kozlowski 0 siblings, 0 replies; 3+ messages in thread From: Krzysztof Kozlowski @ 2026-11-07 10:53 UTC (permalink / raw) To: Gary Yang, Heikki Krogerus, Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Fugang Duan Cc: linux-usb, devicetree, linux-arm-kernel, linux-kernel, cix-kernel-upstream, stable On 07/11/2026 02:10, Gary Yang wrote: > The I2C controller nodes inherit #address-cells = <2> and #size-cells > = <2> from the soc@0 bus, but I2C child devices always use a > single-cell address and no size. With the inherited values every > child node triggers a reg_format warning, and a device described on > the bus would be decoded with the wrong address layout. > > Set #address-cells = <1> and #size-cells = <0> on all eight I2C > controllers, matching the I3C nodes that already do so. > > Fixes: fad32e8ac460 ("arm64: dts: cix: add DT nodes for all I2C and I3C ports for sky1") > Cc: stable@vger.kernel.org > Signed-off-by: Gary Yang <gary.yang@cixtech.com> 1. Fixes cannot depend on the driver. 2. Also, explain what is the bug here. Your commit msg has absolutely no indication of the bug. 3. DTS cannot be combined in this patchset and must be split. Don't mix patches from independent subsystems when you send something explicitly targeting only one subsystem. See also: Documentation/devicetree/bindings/submitting-patches.rst > --- > arch/arm64/boot/dts/cix/sky1.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi > index 0a820f45feb9..a18e8fd43fcf 100644 > --- a/arch/arm64/boot/dts/cix/sky1.dtsi > +++ b/arch/arm64/boot/dts/cix/sky1.dtsi > @@ -290,6 +290,8 @@ soc@0 { > i2c0: i2c@4010000 { > compatible = "cdns,i2c-r1p14"; > reg = <0x0 0x04010000 0x0 0x10000>; > + #address-cells = <1>; > + #size-cells = <0>; How is this a fix? Really. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-07 10:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20261104051055.3020004-1-gary.yang@cixtech.com>
2026-11-04 5:10 ` [PATCH 3/4] arm64: dts: cix: fix I2C bus address and size cells on Sky1 Gary Yang
[not found] <20261107011012.3655873-1-gary.yang@cixtech.com>
2026-11-07 1:10 ` Gary Yang
2026-11-07 10:53 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox