Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Sean Young <sean@mess.org>,
	Hans Verkuil <hverkuil+cisco@kernel.org>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 7.3.y 2/2] media: rc: Add missing locking for keymap
Date: Wed,  4 Nov 2026 21:00:56 -0500	[thread overview]
Message-ID: <20261105020040.1096758-2-sashal@kernel.org> (raw)
In-Reply-To: <20261105020040.1096758-1-sashal@kernel.org>

From: Sean Young <sean@mess.org>

[ Upstream commit ab9567336171e46ce9e03ee126902b3fd7901baa ]

When the rc_map for an rc_dev gets updated, locking is required but is
missing in places. A concurrent scancode lookup and a call to
rc_{register,unregistered}_device() could result in a use-after-free;
this could happen if IR is decoded during those function calls.

Add lockdep assertions where locks are required.

ir_free_table() should only be called for non-TX devices else we will
use a spinlock without iniitializing it.

Fixes: dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks")
Signed-off-by: Sean Young <sean@mess.org>
Cc: stable@vger.kernel.org
Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/rc-main.c | 86 +++++++++++++++++++++++++-------------
 1 file changed, 57 insertions(+), 29 deletions(-)

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 81f3aafcae8f4..946521ace142e 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -104,7 +104,6 @@ static struct rc_map_list *seek_rc_map(const char *name)
 
 struct rc_map *rc_map_get(const char *name)
 {
-
 	struct rc_map_list *map;
 
 	map = seek_rc_map(name);
@@ -201,7 +200,7 @@ static int scancode_to_u64(const struct input_keymap_entry *ke, u64 *scancode)
  * ir_create_table() - initializes a scancode table
  * @dev:	the rc_dev device
  * @rc_map:	the rc_map to initialize
- * @name:	name to assign to the table
+ * @map_name:	name to assign to the table
  * @rc_proto:	ir type to assign to the new table
  * @size:	initial size of the table
  *
@@ -211,23 +210,31 @@ static int scancode_to_u64(const struct input_keymap_entry *ke, u64 *scancode)
  * return:	zero on success or a negative error code
  */
 static int ir_create_table(struct rc_dev *dev, struct rc_map *rc_map,
-			   const char *name, u64 rc_proto, size_t size)
+			   const char *map_name, u64 rc_proto, size_t size)
 {
+	struct rc_map_table *scan;
 	unsigned int alloc;
-	rc_map->name = kstrdup(name, GFP_KERNEL);
-	if (!rc_map->name)
+	char *name;
+
+	name = kstrdup(map_name, GFP_KERNEL);
+	if (!name)
 		return -ENOMEM;
+
 	alloc = roundup_pow_of_two(size);
-	rc_map->rc_proto = rc_proto;
-	rc_map->len = 0;
-	rc_map->size = alloc;
-	rc_map->scan = kmalloc_objs(struct rc_map_table, alloc, GFP_KERNEL);
-	if (!rc_map->scan) {
-		kfree(rc_map->name);
-		rc_map->name = NULL;
+	scan = kmalloc_objs(struct rc_map_table, alloc, GFP_KERNEL);
+	if (!scan) {
+		kfree(name);
 		return -ENOMEM;
 	}
 
+	scoped_guard(spinlock_irqsave, &rc_map->lock) {
+		rc_map->name = name;
+		rc_map->scan = scan;
+		rc_map->rc_proto = rc_proto;
+		rc_map->len = 0;
+		rc_map->size = alloc;
+	}
+
 	dev_dbg(&dev->dev, "Allocated space for %u keycode entries (%zu bytes)\n",
 		alloc, alloc * sizeof(struct rc_map_table));
 	return 0;
@@ -237,16 +244,26 @@ static int ir_create_table(struct rc_dev *dev, struct rc_map *rc_map,
  * ir_free_table() - frees memory allocated by a scancode table
  * @rc_map:	the table whose mappings need to be freed
  *
- * This routine will free memory alloctaed for key mappings used by given
+ * This routine will free memory allocated for key mappings used by given
  * scancode table.
  */
 static void ir_free_table(struct rc_map *rc_map)
 {
-	rc_map->size = 0;
-	kfree(rc_map->name);
-	rc_map->name = NULL;
-	kfree(rc_map->scan);
-	rc_map->scan = NULL;
+	struct rc_map_table *scan;
+	const char *name;
+
+	scoped_guard(spinlock_irqsave, &rc_map->lock) {
+		name = rc_map->name;
+		scan = rc_map->scan;
+
+		rc_map->size = 0;
+		rc_map->len = 0;
+		rc_map->name = NULL;
+		rc_map->scan = NULL;
+	}
+
+	kfree(name);
+	kfree(scan);
 }
 
 /**
@@ -266,6 +283,8 @@ static int ir_resize_table(struct rc_dev *dev, struct rc_map *rc_map,
 	unsigned int newsize = rc_map->size;
 	struct rc_map_table *newscan;
 
+	lockdep_assert_held(&rc_map->lock);
+
 	if (rc_map->size == rc_map->len) {
 		/* All entries in use -> grow keytable */
 		if (newsize >= IR_TAB_MAX_ENTRIES)
@@ -317,6 +336,8 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,
 	int old_keycode = rc_map->scan[index].keycode;
 	int i;
 
+	lockdep_assert_held(&rc_map->lock);
+
 	/* Did the user wish to remove the mapping? */
 	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
 		dev_dbg(&dev->dev, "#%d: Deleting scan 0x%04llx\n",
@@ -372,6 +393,8 @@ static unsigned int ir_establish_scancode(struct rc_dev *dev,
 {
 	unsigned int i;
 
+	lockdep_assert_held(&rc_map->lock);
+
 	/*
 	 * Unfortunately, some hardware-based IR decoders don't provide
 	 * all bits for the complete IR code. In general, they provide only
@@ -396,7 +419,7 @@ static unsigned int ir_establish_scancode(struct rc_dev *dev,
 	/* No previous mapping found, we might need to grow the table */
 	if (rc_map->size == rc_map->len) {
 		if (!resize || ir_resize_table(dev, rc_map, GFP_ATOMIC))
-			return -1U;
+			return UINT_MAX;
 	}
 
 	/* i is the proper index to insert our new keycode */
@@ -478,16 +501,18 @@ static int ir_setkeytable(struct rc_dev *dev, const struct rc_map *from)
 	if (rc)
 		return rc;
 
-	for (i = 0; i < from->size; i++) {
-		index = ir_establish_scancode(dev, rc_map,
-					      from->scan[i].scancode, false);
-		if (index >= rc_map->len) {
-			rc = -ENOMEM;
-			break;
-		}
+	scoped_guard(spinlock_irqsave, &rc_map->lock) {
+		for (i = 0; i < from->size; i++) {
+			index = ir_establish_scancode(dev, rc_map,
+						      from->scan[i].scancode, false);
+			if (index >= rc_map->len) {
+				rc = -ENOMEM;
+				break;
+			}
 
-		ir_update_mapping(dev, rc_map, index,
-				  from->scan[i].keycode);
+			ir_update_mapping(dev, rc_map, index,
+					  from->scan[i].keycode);
+		}
 	}
 
 	if (rc)
@@ -523,6 +548,8 @@ static unsigned int ir_lookup_by_scancode(const struct rc_map *rc_map,
 {
 	struct rc_map_table *res;
 
+	lockdep_assert_held(&rc_map->lock);
+
 	res = bsearch(&scancode, rc_map->scan, rc_map->len,
 		      sizeof(struct rc_map_table), rc_map_cmp);
 	if (!res)
@@ -1993,7 +2020,8 @@ int rc_register_device(struct rc_dev *dev)
 	scoped_guard(mutex, &dev->lock)
 		dev->registered = false;
 out_free_table:
-	ir_free_table(&dev->rc_map);
+	if (dev->driver_type != RC_DRIVER_IR_RAW_TX)
+		ir_free_table(&dev->rc_map);
 out_raw:
 	ida_free(&rc_ida, minor);
 	return rc;
-- 
2.53.0


      reply	other threads:[~2026-11-05  2:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04 14:32 FAILED: patch "[PATCH] media: rc: Add missing locking for keymap" failed to apply to 7.3-stable tree gregkh
2026-11-05  2:00 ` [PATCH 7.3.y 1/2] media: rc: Replace open coded krealloc() for keymap Sasha Levin
2026-11-05  2:00   ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261105020040.1096758-2-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=hverkuil+cisco@kernel.org \
    --cc=sean@mess.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox