* FAILED: patch "[PATCH] wifi: mt76: move the channel survey when the channel changes" failed to apply to 6.6-stable tree
@ 2026-11-07 10:32 Sasha Levin
2026-11-10 22:44 ` [PATCH 6.6.y] wifi: mt76: move the channel survey when the channel changes Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: Sasha Levin @ 2026-11-07 10:32 UTC (permalink / raw)
To: lucid_duck, hoopyfrood42, nbd; +Cc: stable
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 68342a7bd7e5e273e2969e3c0f4c62ee3d006ce8
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261107053231-failed-6.6-68342a7bd7e5@kernel.org' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'
Thanks,
Sasha
------------------ original commit in Linus's tree ------------------
From 68342a7bd7e5e273e2969e3c0f4c62ee3d006ce8 Mon Sep 17 00:00:00 2001
From: Devin Wittmayer <lucid_duck@justthetip.ca>
Date: Wed, 30 Sep 2026 17:35:01 -0700
Subject: [PATCH] wifi: mt76: move the channel survey when the channel changes
mt7921 and mt7925 report every survey counter against one channel and
never mark the one in use. With firmware channel management, both use
channel contexts and never call __mt76_set_channel(), so
phy->chan_state, phy->chandef and phy->main_chandef keep the first
channel of the band.
Update them when a context is assigned or changed, after booking the
time spent on the old channel. This also makes the legacy rate lookup
in mt76_connac2_mac_fill_txs() and mt7925_mac_add_txs_skb() use the
band of the current channel.
With two channel contexts (multi-channel or MLO), the survey follows
the context that was assigned or changed last, since the driver reads
the band 0 counters only.
Tested on MT7922 over PCIe, MT7921AU and MT7925 over USB.
Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Reported-by: Chris <hoopyfrood42@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CAHaeJsT8O8Nhq351hFp3NAL8e0iU85N-LBdYZ9nYHFHVy7t_hQ@mail.gmail.com/
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20261001003501.2425492-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/net/wireless/mediatek/mt76/mac80211.c | 14 ++++++++++++++
drivers/net/wireless/mediatek/mt76/mt76.h | 2 ++
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7925/main.c | 2 ++
drivers/net/wireless/mediatek/mt76/mt792x_core.c | 1 +
5 files changed, 20 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mac80211.c b/drivers/net/wireless/mediatek/mt76/mac80211.c
index 0e45533ea89c7..3991696515e27 100644
--- a/drivers/net/wireless/mediatek/mt76/mac80211.c
+++ b/drivers/net/wireless/mediatek/mt76/mac80211.c
@@ -1045,6 +1045,20 @@ void mt76_update_survey(struct mt76_phy *phy)
}
EXPORT_SYMBOL_GPL(mt76_update_survey);
+void mt76_phy_chandef_set(struct mt76_phy *phy,
+ struct cfg80211_chan_def *chandef)
+{
+ if (!chandef->chan)
+ return;
+
+ mt76_update_survey(phy);
+
+ phy->chandef = *chandef;
+ phy->main_chandef = *chandef;
+ phy->chan_state = mt76_channel_state(phy, chandef->chan);
+}
+EXPORT_SYMBOL_GPL(mt76_phy_chandef_set);
+
int __mt76_set_channel(struct mt76_phy *phy, struct cfg80211_chan_def *chandef,
bool offchannel)
{
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 2ade848fe3bbb..e9bbec1269fac 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -1555,6 +1555,8 @@ void mt76_sta_ps_transition(struct mt76_dev *dev, struct mt76_wcid *wcid,
bool mt76_has_tx_pending(struct mt76_phy *phy);
int mt76_update_channel(struct mt76_phy *phy);
void mt76_update_survey(struct mt76_phy *phy);
+void mt76_phy_chandef_set(struct mt76_phy *phy,
+ struct cfg80211_chan_def *chandef);
void mt76_update_survey_active_time(struct mt76_phy *phy, ktime_t time);
int mt76_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index d0f6460c7fd88..d041df807f615 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -1421,6 +1421,7 @@ mt7921_change_chanctx(struct ieee80211_hw *hw,
} else {
mt76_connac_mcu_uni_set_chctx(mvif->phy->mt76, &mvif->bss_conf.mt76, ctx);
}
+ mt76_phy_chandef_set(mvif->phy->mt76, &ctx->def);
mt792x_mutex_release(phy->dev);
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index d124d46667071..3a5d6f51832ca 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -2077,6 +2077,7 @@ mt7925_change_chanctx(struct ieee80211_hw *hw,
link_conf, ctx);
}
}
+ mt76_phy_chandef_set(mvif->phy->mt76, &ctx->def);
mt792x_mutex_release(phy->dev);
}
@@ -2413,6 +2414,7 @@ static int mt7925_assign_vif_chanctx(struct ieee80211_hw *hw,
mconf->mt76.ctx = ctx;
mctx->bss_conf = mconf;
+ mt76_phy_chandef_set(mvif->phy->mt76, &ctx->def);
mutex_unlock(&dev->mt76.mutex);
return 0;
diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_core.c b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
index 0ad33f74c2285..f56f03bfe3874 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
@@ -472,6 +472,7 @@ int mt792x_assign_vif_chanctx(struct ieee80211_hw *hw,
mutex_lock(&dev->mt76.mutex);
mvif->bss_conf.mt76.ctx = ctx;
mctx->bss_conf = &mvif->bss_conf;
+ mt76_phy_chandef_set(&dev->mphy, &ctx->def);
mutex_unlock(&dev->mt76.mutex);
return 0;
--
2.53.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH 6.6.y] wifi: mt76: move the channel survey when the channel changes
2026-11-07 10:32 FAILED: patch "[PATCH] wifi: mt76: move the channel survey when the channel changes" failed to apply to 6.6-stable tree Sasha Levin
@ 2026-11-10 22:44 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2026-11-10 22:44 UTC (permalink / raw)
To: stable; +Cc: Devin Wittmayer, Chris, Felix Fietkau, Sasha Levin
From: Devin Wittmayer <lucid_duck@justthetip.ca>
[ Upstream commit 68342a7bd7e5e273e2969e3c0f4c62ee3d006ce8 ]
mt7921 and mt7925 report every survey counter against one channel and
never mark the one in use. With firmware channel management, both use
channel contexts and never call __mt76_set_channel(), so
phy->chan_state, phy->chandef and phy->main_chandef keep the first
channel of the band.
Update them when a context is assigned or changed, after booking the
time spent on the old channel. This also makes the legacy rate lookup
in mt76_connac2_mac_fill_txs() and mt7925_mac_add_txs_skb() use the
band of the current channel.
With two channel contexts (multi-channel or MLO), the survey follows
the context that was assigned or changed last, since the driver reads
the band 0 counters only.
Tested on MT7922 over PCIe, MT7921AU and MT7925 over USB.
Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Reported-by: Chris <hoopyfrood42@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CAHaeJsT8O8Nhq351hFp3NAL8e0iU85N-LBdYZ9nYHFHVy7t_hQ@mail.gmail.com/
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20261001003501.2425492-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[ sashal: adapted channel survey integration to the existing main_chan field and MT7921 context layout. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mac80211.c | 14 ++++++++++++++
drivers/net/wireless/mediatek/mt76/mt76.h | 2 ++
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 1 +
drivers/net/wireless/mediatek/mt76/mt792x_core.c | 1 +
4 files changed, 18 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mac80211.c b/drivers/net/wireless/mediatek/mt76/mac80211.c
index 3f09bf58130d4..379eecd09d0f0 100644
--- a/drivers/net/wireless/mediatek/mt76/mac80211.c
+++ b/drivers/net/wireless/mediatek/mt76/mac80211.c
@@ -945,6 +945,20 @@ void mt76_update_survey(struct mt76_phy *phy)
}
EXPORT_SYMBOL_GPL(mt76_update_survey);
+void mt76_phy_chandef_set(struct mt76_phy *phy,
+ struct cfg80211_chan_def *chandef)
+{
+ if (!chandef->chan)
+ return;
+
+ mt76_update_survey(phy);
+
+ phy->chandef = *chandef;
+ phy->main_chan = chandef->chan;
+ phy->chan_state = mt76_channel_state(phy, chandef->chan);
+}
+EXPORT_SYMBOL_GPL(mt76_phy_chandef_set);
+
void mt76_set_channel(struct mt76_phy *phy)
{
struct mt76_dev *dev = phy->dev;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 5050f640530f8..37ba676ca9038 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -1297,6 +1297,8 @@ void mt76_release_buffered_frames(struct ieee80211_hw *hw,
bool mt76_has_tx_pending(struct mt76_phy *phy);
void mt76_set_channel(struct mt76_phy *phy);
void mt76_update_survey(struct mt76_phy *phy);
+void mt76_phy_chandef_set(struct mt76_phy *phy,
+ struct cfg80211_chan_def *chandef);
void mt76_update_survey_active_time(struct mt76_phy *phy, ktime_t time);
int mt76_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 8f0976e9c295e..acf54f27332f6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -1292,6 +1292,7 @@ static void mt7921_ctx_iter(void *priv, u8 *mac,
mt7921_mcu_config_sniffer(mvif, ctx);
else
mt76_connac_mcu_uni_set_chctx(mvif->phy->mt76, &mvif->mt76, ctx);
+ mt76_phy_chandef_set(mvif->phy->mt76, &ctx->def);
}
static void
diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_core.c b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
index d990e34cfcd23..aa76ca4be33a8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
@@ -244,6 +244,7 @@ int mt792x_assign_vif_chanctx(struct ieee80211_hw *hw,
mutex_lock(&dev->mt76.mutex);
mvif->mt76.ctx = ctx;
+ mt76_phy_chandef_set(&dev->mphy, &ctx->def);
mutex_unlock(&dev->mt76.mutex);
return 0;
--
2.53.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-10 22:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-07 10:32 FAILED: patch "[PATCH] wifi: mt76: move the channel survey when the channel changes" failed to apply to 6.6-stable tree Sasha Levin
2026-11-10 22:44 ` [PATCH 6.6.y] wifi: mt76: move the channel survey when the channel changes Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox