Linux kernel -stable discussions
 help / color / mirror / Atom feed
* FAILED: patch "[PATCH] media: qcom: camss: vfe: Fix VFE reset while another line is streaming" failed to apply to 5.15-stable tree
@ 2026-11-07 11:00 Sasha Levin
  2026-11-11  4:13 ` [PATCH 5.15.y 1/6] media: camss: vfe: Don't read hardware version needlessly Sasha Levin
  0 siblings, 1 reply; 7+ messages in thread
From: Sasha Levin @ 2026-11-07 11:00 UTC (permalink / raw)
  To: hitesh, bryan.odonoghue, bod; +Cc: stable

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x e5d4b0e69a4017fd39354499c9d7583f625f0524
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261107060052-failed-5.15-e5d4b0e69a40@kernel.org' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From e5d4b0e69a4017fd39354499c9d7583f625f0524 Mon Sep 17 00:00:00 2001
From: Hitesh Patel <hitesh@ebytelogic.com>
Date: Mon, 28 Sep 2026 17:45:05 +0530
Subject: [PATCH] media: qcom: camss: vfe: Fix VFE reset while another line is
 streaming

vfe_disable_output() stops the write masters of the line being
disabled and then resets the whole VFE. The reset is not limited to
that line.

When two lines of one VFE stream at the same time, which is the case
whenever a CSID demultiplexes several virtual channels to different
RDIs, stopping the first line resets the VFE underneath the second
line. The second line's write master configuration is wiped, the
buffers it had in flight are never completed, and the VFE is left in
a state in which the next global reset is not acknowledged. Stopping
or restarting the second line then fails with:

  VFE reset timeout

Move the reset to vfe_disable() and do it under stream_lock, as part
of the decrement that makes the count reach zero, so that exactly one
caller resets and no line can be enabled while the reset runs.
Stopping the line's write masters is enough to quiesce that line on
its own. With a single line streaming, the reset happens exactly as
before.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Hitesh Patel <hitesh@ebytelogic.com>
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: Converted vfe_disable_output to void]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
---
 drivers/media/platform/qcom/camss/camss-vfe.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index c14d97a131f69..2680a9914765f 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -808,7 +808,7 @@ int vfe_put_output(struct vfe_line *line)
 	return 0;
 }
 
-static int vfe_disable_output(struct vfe_line *line)
+static void vfe_disable_output(struct vfe_line *line)
 {
 	struct vfe_device *vfe = to_vfe(line);
 	struct vfe_output *output = &line->output;
@@ -820,8 +820,6 @@ static int vfe_disable_output(struct vfe_line *line)
 		vfe->res->hw_ops->vfe_wm_stop(vfe, output->wm_idx[i]);
 	output->gen2.active_num = 0;
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
-
-	return vfe_reset(vfe);
 }
 
 /*
@@ -833,21 +831,19 @@ static int vfe_disable_output(struct vfe_line *line)
 int vfe_disable(struct vfe_line *line)
 {
 	struct vfe_device *vfe = to_vfe(line);
-	int ret;
+	int ret = 0;
 
-	ret = vfe_disable_output(line);
-	if (ret)
-		goto error;
+	vfe_disable_output(line);
 
 	vfe_put_output(line);
 
 	mutex_lock(&vfe->stream_lock);
 
-	vfe->stream_count--;
+	if (--vfe->stream_count == 0)
+		ret = vfe_reset(vfe);
 
 	mutex_unlock(&vfe->stream_lock);
 
-error:
 	return ret;
 }
 
-- 
2.53.0





^ permalink raw reply related	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2026-11-11  4:13 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-07 11:00 FAILED: patch "[PATCH] media: qcom: camss: vfe: Fix VFE reset while another line is streaming" failed to apply to 5.15-stable tree Sasha Levin
2026-11-11  4:13 ` [PATCH 5.15.y 1/6] media: camss: vfe: Don't read hardware version needlessly Sasha Levin
2026-11-11  4:13   ` [PATCH 5.15.y 2/6] media: camss: vfe: Decrease priority of of VFE HW version to 'dbg' Sasha Levin
2026-11-11  4:13   ` [PATCH 5.15.y 3/6] media: camss: vfe: Remove vfe_hw_version_read() argument Sasha Levin
2026-11-11  4:13   ` [PATCH 5.15.y 4/6] media: camss: vfe: Rework vfe_hw_version_read() function definition Sasha Levin
2026-11-11  4:13   ` [PATCH 5.15.y 5/6] media: qcom: camss: Move vfe_disable into a common routine where applicable Sasha Levin
2026-11-11  4:13   ` [PATCH 5.15.y 6/6] media: qcom: camss: vfe: Fix VFE reset while another line is streaming Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox