Linux kernel -stable discussions
 help / color / mirror / Atom feed
* [PATCH v2 1/6] pinctrl: tegra186: Fix out-of-bounds register bank index for AON drive groups
       [not found] <20261119204748.2558209-1-lee@kernel.org>
@ 2026-11-19 20:47 ` Lee Jones
  2026-11-19 20:47 ` [PATCH v2 2/6] pinctrl: ingenic: Fix element type of x1600_sfc_funcs array Lee Jones
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2026-11-19 20:47 UTC (permalink / raw)
  To: lee, Linus Walleij, Thierry Reding, Jonathan Hunter, Aaron Kling,
	linux-gpio, linux-tegra, linux-kernel
  Cc: stable, Thierry Reding

The Tegra186 AON pinmux controller has only a single register bank
(nbanks = 1, indexed at 0), and all PINGROUP entries in
tegra186_aon_groups accordingly specify bank 0.  However, all 51 AON
drive_* macro definitions pass drv_bank = 1 as the final argument to
DRV_PINGROUP_ENTRY_Y, causing any drive configuration read or write on
an AON drive group to index pmx->regs[1] out-of-bounds.

Update the AON drive_* macro definitions to use register bank 0.

Fixes: 542baf77f092 ("pinctrl: tegra: Add Tegra186 pinmux driver")
Closes: https://sashiko.dev/#/bug/linux-a9a7165c-c5eb-463a-b7b1-24a30416b33b
Cc: stable@vger.kernel.org
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee@kernel.org>
---

v1 => v2: Collect Thierry's Reviewed-by

 drivers/pinctrl/tegra/pinctrl-tegra186.c | 102 +++++++++++------------
 1 file changed, 51 insertions(+), 51 deletions(-)

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra186.c b/drivers/pinctrl/tegra/pinctrl-tegra186.c
index 4a1d6476af9b..3bf1814dbd24 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra186.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra186.c
@@ -1585,57 +1585,57 @@ static const char * const tegra186_functions[] = {
 #define drive_qspi_comp                 DRV_PINGROUP_ENTRY_N(no_entry)
 
 /* AON drive pin groups */
-#define drive_touch_clk_pee2            DRV_PINGROUP_ENTRY_Y(0x2004,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_uart3_cts_pw5             DRV_PINGROUP_ENTRY_Y(0x200c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_uart3_rts_pw4             DRV_PINGROUP_ENTRY_Y(0x2014,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_uart3_rx_pw3              DRV_PINGROUP_ENTRY_Y(0x201c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_uart3_tx_pw2              DRV_PINGROUP_ENTRY_Y(0x2024,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gen8_i2c_sda_pw1          DRV_PINGROUP_ENTRY_Y(0x202c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gen8_i2c_scl_pw0          DRV_PINGROUP_ENTRY_Y(0x2034,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_uart7_rx_pw7              DRV_PINGROUP_ENTRY_Y(0x203c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_uart7_tx_pw6              DRV_PINGROUP_ENTRY_Y(0x2044,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen0_pv0             DRV_PINGROUP_ENTRY_Y(0x204c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen1_pv1             DRV_PINGROUP_ENTRY_Y(0x2054,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen2_pv2             DRV_PINGROUP_ENTRY_Y(0x205c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen3_pv3             DRV_PINGROUP_ENTRY_Y(0x2064,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen4_pv4             DRV_PINGROUP_ENTRY_Y(0x206c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen5_pv5             DRV_PINGROUP_ENTRY_Y(0x2074,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen6_pv6             DRV_PINGROUP_ENTRY_Y(0x207c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen7_pv7             DRV_PINGROUP_ENTRY_Y(0x2084,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen8_pee0            DRV_PINGROUP_ENTRY_Y(0x208c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sen9_pee1            DRV_PINGROUP_ENTRY_Y(0x2094,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_can_gpio7_paa7            DRV_PINGROUP_ENTRY_Y(0x3004,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can1_dout_pz0             DRV_PINGROUP_ENTRY_Y(0x300C,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can1_din_pz1              DRV_PINGROUP_ENTRY_Y(0x3014,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can0_dout_pz2             DRV_PINGROUP_ENTRY_Y(0x301c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can0_din_pz3              DRV_PINGROUP_ENTRY_Y(0x3024,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can_gpio0_paa0            DRV_PINGROUP_ENTRY_Y(0x302c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can_gpio1_paa1            DRV_PINGROUP_ENTRY_Y(0x3034,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can_gpio2_paa2            DRV_PINGROUP_ENTRY_Y(0x303c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can_gpio3_paa3            DRV_PINGROUP_ENTRY_Y(0x3044,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can_gpio4_paa4            DRV_PINGROUP_ENTRY_Y(0x304c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can_gpio5_paa5            DRV_PINGROUP_ENTRY_Y(0x3054,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_can_gpio6_paa6            DRV_PINGROUP_ENTRY_Y(0x305c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	1)
-#define drive_gpio_sw1_pff1             DRV_PINGROUP_ENTRY_Y(0x1004,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sw2_pff2             DRV_PINGROUP_ENTRY_Y(0x100c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sw3_pff3             DRV_PINGROUP_ENTRY_Y(0x1014,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_sw4_pff4             DRV_PINGROUP_ENTRY_Y(0x101c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_shutdown                  DRV_PINGROUP_ENTRY_Y(0x1024,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_pmu_int                   DRV_PINGROUP_ENTRY_Y(0x102C,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_safe_state_ps3            DRV_PINGROUP_ENTRY_Y(0x1034,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_vcomp_alert_ps4           DRV_PINGROUP_ENTRY_Y(0x103c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_soc_pwr_req               DRV_PINGROUP_ENTRY_Y(0x1044,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_batt_oc_ps2               DRV_PINGROUP_ENTRY_Y(0x104c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_clk_32k_in                DRV_PINGROUP_ENTRY_Y(0x1054,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_power_on_pff0             DRV_PINGROUP_ENTRY_Y(0x105c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_pwr_i2c_scl_ps0           DRV_PINGROUP_ENTRY_Y(0x1064,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_pwr_i2c_sda_ps1           DRV_PINGROUP_ENTRY_Y(0x106c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_dis0_pu0             DRV_PINGROUP_ENTRY_Y(0x1084,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_dis1_pu1             DRV_PINGROUP_ENTRY_Y(0x108c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_dis2_pu2             DRV_PINGROUP_ENTRY_Y(0x1094,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_dis3_pu3             DRV_PINGROUP_ENTRY_Y(0x109c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_dis4_pu4             DRV_PINGROUP_ENTRY_Y(0x10a4,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
-#define drive_gpio_dis5_pu5             DRV_PINGROUP_ENTRY_Y(0x10ac,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	1)
+#define drive_touch_clk_pee2            DRV_PINGROUP_ENTRY_Y(0x2004,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_uart3_cts_pw5             DRV_PINGROUP_ENTRY_Y(0x200c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_uart3_rts_pw4             DRV_PINGROUP_ENTRY_Y(0x2014,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_uart3_rx_pw3              DRV_PINGROUP_ENTRY_Y(0x201c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_uart3_tx_pw2              DRV_PINGROUP_ENTRY_Y(0x2024,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gen8_i2c_sda_pw1          DRV_PINGROUP_ENTRY_Y(0x202c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gen8_i2c_scl_pw0          DRV_PINGROUP_ENTRY_Y(0x2034,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_uart7_rx_pw7              DRV_PINGROUP_ENTRY_Y(0x203c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_uart7_tx_pw6              DRV_PINGROUP_ENTRY_Y(0x2044,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen0_pv0             DRV_PINGROUP_ENTRY_Y(0x204c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen1_pv1             DRV_PINGROUP_ENTRY_Y(0x2054,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen2_pv2             DRV_PINGROUP_ENTRY_Y(0x205c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen3_pv3             DRV_PINGROUP_ENTRY_Y(0x2064,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen4_pv4             DRV_PINGROUP_ENTRY_Y(0x206c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen5_pv5             DRV_PINGROUP_ENTRY_Y(0x2074,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen6_pv6             DRV_PINGROUP_ENTRY_Y(0x207c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen7_pv7             DRV_PINGROUP_ENTRY_Y(0x2084,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen8_pee0            DRV_PINGROUP_ENTRY_Y(0x208c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sen9_pee1            DRV_PINGROUP_ENTRY_Y(0x2094,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_can_gpio7_paa7            DRV_PINGROUP_ENTRY_Y(0x3004,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can1_dout_pz0             DRV_PINGROUP_ENTRY_Y(0x300C,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can1_din_pz1              DRV_PINGROUP_ENTRY_Y(0x3014,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can0_dout_pz2             DRV_PINGROUP_ENTRY_Y(0x301c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can0_din_pz3              DRV_PINGROUP_ENTRY_Y(0x3024,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can_gpio0_paa0            DRV_PINGROUP_ENTRY_Y(0x302c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can_gpio1_paa1            DRV_PINGROUP_ENTRY_Y(0x3034,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can_gpio2_paa2            DRV_PINGROUP_ENTRY_Y(0x303c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can_gpio3_paa3            DRV_PINGROUP_ENTRY_Y(0x3044,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can_gpio4_paa4            DRV_PINGROUP_ENTRY_Y(0x304c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can_gpio5_paa5            DRV_PINGROUP_ENTRY_Y(0x3054,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_can_gpio6_paa6            DRV_PINGROUP_ENTRY_Y(0x305c,	-1,	-1,	-1,	-1,	28,	2,	30,	2,	0)
+#define drive_gpio_sw1_pff1             DRV_PINGROUP_ENTRY_Y(0x1004,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sw2_pff2             DRV_PINGROUP_ENTRY_Y(0x100c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sw3_pff3             DRV_PINGROUP_ENTRY_Y(0x1014,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_sw4_pff4             DRV_PINGROUP_ENTRY_Y(0x101c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_shutdown                  DRV_PINGROUP_ENTRY_Y(0x1024,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_pmu_int                   DRV_PINGROUP_ENTRY_Y(0x102C,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_safe_state_ps3            DRV_PINGROUP_ENTRY_Y(0x1034,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_vcomp_alert_ps4           DRV_PINGROUP_ENTRY_Y(0x103c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_soc_pwr_req               DRV_PINGROUP_ENTRY_Y(0x1044,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_batt_oc_ps2               DRV_PINGROUP_ENTRY_Y(0x104c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_clk_32k_in                DRV_PINGROUP_ENTRY_Y(0x1054,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_power_on_pff0             DRV_PINGROUP_ENTRY_Y(0x105c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_pwr_i2c_scl_ps0           DRV_PINGROUP_ENTRY_Y(0x1064,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_pwr_i2c_sda_ps1           DRV_PINGROUP_ENTRY_Y(0x106c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_dis0_pu0             DRV_PINGROUP_ENTRY_Y(0x1084,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_dis1_pu1             DRV_PINGROUP_ENTRY_Y(0x108c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_dis2_pu2             DRV_PINGROUP_ENTRY_Y(0x1094,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_dis3_pu3             DRV_PINGROUP_ENTRY_Y(0x109c,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_dis4_pu4             DRV_PINGROUP_ENTRY_Y(0x10a4,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
+#define drive_gpio_dis5_pu5             DRV_PINGROUP_ENTRY_Y(0x10ac,	12,	5,	20,	5,	-1,	-1,	-1,	-1,	0)
 
 #define PINGROUP(pg_name, f0, f1, f2, f3, r, bank, pupd, e_io_hv, e_lpbk, e_input, e_lpdr, e_pbias_buf, \
 			gpio_sfio_sel, e_od, schmitt_b, drvtype, epreemp, io_reset, rfu_in)		\
-- 
2.56.1.750.gf70dc682cf-goog


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 2/6] pinctrl: ingenic: Fix element type of x1600_sfc_funcs array
       [not found] <20261119204748.2558209-1-lee@kernel.org>
  2026-11-19 20:47 ` [PATCH v2 1/6] pinctrl: tegra186: Fix out-of-bounds register bank index for AON drive groups Lee Jones
@ 2026-11-19 20:47 ` Lee Jones
  2026-11-19 20:47 ` [PATCH v2 3/6] pinctrl: mediatek: mt7981: Add missing entries to mt7981_ant_sel_funcs Lee Jones
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2026-11-19 20:47 UTC (permalink / raw)
  To: lee, Paul Cercueil, Linus Walleij, Olivier Louvignes, Paul Boddie,
	zhouyanjie, H. Nikolaus Schaller, Andreas Kemnade, linux-mips,
	linux-gpio, linux-kernel
  Cc: stable

ingenic_pinmux_set_mux() treats grp->data as a u8 array of per-pin mux
modes (u8 *pin_modes = grp->data), and every other *_funcs array in the
Ingenic pinctrl driver is declared as u8[].  Because x1600_sfc_funcs[]
was declared as int[], indexing pin_modes[0..6] reads the first seven
bytes of the int array (0, 0, 0, 0, 0, 0, 0) instead of reading mode 2
for the seventh pin.

Change the element type of x1600_sfc_funcs[] from int to u8.

Fixes: 4da56f9c6f14 ("pinctrl: ingenic: add x1600 support")
Closes: https://sashiko.dev/#/bug/linux-5dccd0ae-9450-440a-87d0-44cc86d1af45
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---

v1 => v2: No changes

 drivers/pinctrl/pinctrl-ingenic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 4d27ec03f15f..d39bb901aaca 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -2470,7 +2470,7 @@ static int x1600_mac_pins[] = {
 	0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, 0x3c,
 };
 
-static int x1600_sfc_funcs[] = { 0, 0, 0, 0, 0, 0, 2, };
+static u8 x1600_sfc_funcs[] = { 0, 0, 0, 0, 0, 0, 2, };
 
 static const struct group_desc x1600_groups[] = {
 	INGENIC_PIN_GROUP("uart0-data", x1600_uart0_data, 0),
-- 
2.56.1.750.gf70dc682cf-goog


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 3/6] pinctrl: mediatek: mt7981: Add missing entries to mt7981_ant_sel_funcs
       [not found] <20261119204748.2558209-1-lee@kernel.org>
  2026-11-19 20:47 ` [PATCH v2 1/6] pinctrl: tegra186: Fix out-of-bounds register bank index for AON drive groups Lee Jones
  2026-11-19 20:47 ` [PATCH v2 2/6] pinctrl: ingenic: Fix element type of x1600_sfc_funcs array Lee Jones
@ 2026-11-19 20:47 ` Lee Jones
  2026-11-19 20:47 ` [PATCH v2 4/6] pinctrl: mediatek: Guard against NULL eint in mtk_eint_do_suspend() and mtk_eint_do_resume() Lee Jones
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2026-11-19 20:47 UTC (permalink / raw)
  To: lee, Sean Wang, Linus Walleij, Matthias Brugger,
	AngeloGioacchino Del Regno, Sam Shih, Daniel Golle, Rob Herring,
	linux-mediatek, linux-gpio, linux-kernel, linux-arm-kernel
  Cc: stable

mt7981_ant_sel_pins[] defines 14 pins (pins 14..25, 34, and 35), all of
which select ANT_SEL at function mux mode 6, but mt7981_ant_sel_funcs[]
only contains 12 entries.  When mtk_pinmux_set_mux() iterates over
grp->grp.npins (14), it reads two int elements past the end of
mt7981_ant_sel_funcs[].

Add the two missing mode 6 entries to mt7981_ant_sel_funcs[] so its
length matches mt7981_ant_sel_pins[].

Fixes: 6c83b2d94fcc ("pinctrl: add mt7981 pinctrl driver")
Closes: https://sashiko.dev/#/bug/linux-6233f285-1487-4d2d-afe3-d4ce3c445054
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---

v1 => v2: No changes

 drivers/pinctrl/mediatek/pinctrl-mt7981.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7981.c b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
index 2325cc8b9345..62fec909408b 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
@@ -800,7 +800,7 @@ static int mt7981_mt7531_int_funcs[] = { 1, };
 
 /* ANT_SEL */
 static int mt7981_ant_sel_pins[] = { 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 34, 35 };
-static int mt7981_ant_sel_funcs[] = { 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 };
+static int mt7981_ant_sel_funcs[] = { 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 };
 
 static const struct group_desc mt7981_groups[] = {
 	/* @GPIO(0,1): WA_AICE(2) */
-- 
2.56.1.750.gf70dc682cf-goog


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 4/6] pinctrl: mediatek: Guard against NULL eint in mtk_eint_do_suspend() and mtk_eint_do_resume()
       [not found] <20261119204748.2558209-1-lee@kernel.org>
                   ` (2 preceding siblings ...)
  2026-11-19 20:47 ` [PATCH v2 3/6] pinctrl: mediatek: mt7981: Add missing entries to mt7981_ant_sel_funcs Lee Jones
@ 2026-11-19 20:47 ` Lee Jones
  2026-11-19 20:47 ` [PATCH v2 5/6] pinctrl: mediatek: Clean up partially initialised hw->eint on error Lee Jones
  2026-11-19 20:47 ` [PATCH v2 6/6] pinctrl: mediatek: Prevent divide-by-zero for pins with fixed drive strength Lee Jones
  5 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2026-11-19 20:47 UTC (permalink / raw)
  To: lee, Sean Wang, Linus Walleij, Matthias Brugger,
	AngeloGioacchino Del Regno, Maoguang Meng, Hao Chang,
	Qingliang Li, Nicolas Boichat, linux-mediatek, linux-gpio,
	linux-kernel, linux-arm-kernel
  Cc: stable

mtk_paris_pinctrl_probe() treats mtk_build_eint() failure as non-fatal,
logging a warning and completing probe with hw->eint left as NULL
whenever EINT initialisation is skipped or fails.  However, the system
sleep callbacks pass pctl->eint unconditionally to
mtk_eint_do_suspend() and mtk_eint_do_resume(), both of which
dereference eint without checking for NULL.

Return 0 early from mtk_eint_do_suspend() and mtk_eint_do_resume() when
eint is NULL.

Fixes: 5c0904488a20 ("pinctrl: mediatek: Add pm_ops to pinctrl-paris")
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---

v1 => v2:
 - New patch, avoiding a NULL dereference on suspend/resume when EINT
   setup fails (Sashiko)

 drivers/pinctrl/mediatek/mtk-eint.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c
index 827231dc0d24..ca47a416c666 100644
--- a/drivers/pinctrl/mediatek/mtk-eint.c
+++ b/drivers/pinctrl/mediatek/mtk-eint.c
@@ -427,6 +427,9 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
 
 int mtk_eint_do_suspend(struct mtk_eint *eint)
 {
+	if (!eint)
+		return 0;
+
 	mtk_eint_chip_write_mask(eint, eint->wake_mask);
 
 	return 0;
@@ -435,6 +438,9 @@ EXPORT_SYMBOL_GPL(mtk_eint_do_suspend);
 
 int mtk_eint_do_resume(struct mtk_eint *eint)
 {
+	if (!eint)
+		return 0;
+
 	mtk_eint_chip_write_mask(eint, eint->cur_mask);
 
 	return 0;
-- 
2.56.1.750.gf70dc682cf-goog


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 5/6] pinctrl: mediatek: Clean up partially initialised hw->eint on error
       [not found] <20261119204748.2558209-1-lee@kernel.org>
                   ` (3 preceding siblings ...)
  2026-11-19 20:47 ` [PATCH v2 4/6] pinctrl: mediatek: Guard against NULL eint in mtk_eint_do_suspend() and mtk_eint_do_resume() Lee Jones
@ 2026-11-19 20:47 ` Lee Jones
  2026-11-19 20:47 ` [PATCH v2 6/6] pinctrl: mediatek: Prevent divide-by-zero for pins with fixed drive strength Lee Jones
  5 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2026-11-19 20:47 UTC (permalink / raw)
  To: lee, Sean Wang, Linus Walleij, Matthias Brugger,
	AngeloGioacchino Del Regno, Bartosz Golaszewski, Hao Chang,
	Qingliang Li, linux-mediatek, linux-gpio, linux-kernel,
	linux-arm-kernel
  Cc: stable

In mtk_build_eint(), if of_property_count_strings() fails or
hw->eint->nbase is non-positive, the function returns -EINVAL directly
after allocating hw->eint without jumping to err_free_base.  Because
callers such as mtk_paris_pinctrl_probe() and mtk_moore_pinctrl_probe()
log a warning and continue probing when mtk_build_eint() fails, leaving
hw->eint non-NULL with hw->eint->domain and hw->eint->hw unset causes
mtk_gpio_to_irq() and mtk_gpio_set_config() to pass the half-initialised
structure into mtk_eint_find_irq() and mtk_eint_set_debounce(),
dereferencing NULL pointers.

Jump to err_free_base on both error paths so hw->eint is freed and
reset to NULL.

Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses")
Closes: https://sashiko.dev/#/bug/linux-0689c07e-ef74-4bc2-b5de-bd2f361124bd
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---

v1 => v2:
 - Clarify the commit message regarding mtk_gpio_to_irq() and
   mtk_gpio_set_config(), while handling NULL eint on suspend/resume in
   the preceding patch (Sashiko)

 drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index bf9d20b59213..95d0455f7d53 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -382,12 +382,16 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev)
 		return -ENOMEM;
 
 	count_reg_names = of_property_count_strings(np, "reg-names");
-	if (count_reg_names < 0)
-		return -EINVAL;
+	if (count_reg_names < 0) {
+		ret = -EINVAL;
+		goto err_free_base;
+	}
 
 	hw->eint->nbase = count_reg_names - (int)hw->soc->nbase_names;
-	if (hw->eint->nbase <= 0)
-		return -EINVAL;
+	if (hw->eint->nbase <= 0) {
+		ret = -EINVAL;
+		goto err_free_base;
+	}
 
 	hw->eint->base = devm_kmalloc_array(&pdev->dev, hw->eint->nbase,
 					    sizeof(*hw->eint->base), GFP_KERNEL | __GFP_ZERO);
-- 
2.56.1.750.gf70dc682cf-goog


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 6/6] pinctrl: mediatek: Prevent divide-by-zero for pins with fixed drive strength
       [not found] <20261119204748.2558209-1-lee@kernel.org>
                   ` (4 preceding siblings ...)
  2026-11-19 20:47 ` [PATCH v2 5/6] pinctrl: mediatek: Clean up partially initialised hw->eint on error Lee Jones
@ 2026-11-19 20:47 ` Lee Jones
  5 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2026-11-19 20:47 UTC (permalink / raw)
  To: lee, Sean Wang, Linus Walleij, Matthias Brugger,
	AngeloGioacchino Del Regno, Ryder.Lee, linux-mediatek, linux-gpio,
	linux-kernel, linux-arm-kernel
  Cc: stable

mtk_drive[] only defines entries for DRV_GRP0 (1) through DRV_GRP4 (5),
leaving mtk_drive[DRV_FIXED] (0) zero-initialised with min = 0, max = 0,
step = 0, and scal = 0.  If mtk_pinconf_drive_set() or
mtk_pinconf_drive_set_rev1() is called with arg = 0 on a pin with
drv_n == DRV_FIXED, the range check (0 >= 0 && 0 <= 0) succeeds and
!(arg % tb->step) divides by zero.  Similarly, mtk_pinconf_drive_get()
and mtk_pinconf_drive_get_rev1() divide by tb->scal (0) if the pin has
drive register fields defined.

Return -ENOTSUPP immediately when desc->drv_n == DRV_FIXED.

Fixes: c28321979ba8 ("pinctrl: mediatek: add driving strength related support to pinctrl-mtk-common-v2.c")
Closes: https://sashiko.dev/#/bug/linux-d3852d37-6806-4c41-a493-f249dd59d0c6
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---

v1 => v2: No changes

 drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 95d0455f7d53..d0c2292a1bbf 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -1040,6 +1040,9 @@ int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
 	const struct mtk_drive_desc *tb;
 	int err = -ENOTSUPP;
 
+	if (desc->drv_n == DRV_FIXED)
+		return -ENOTSUPP;
+
 	tb = &mtk_drive[desc->drv_n];
 	/* 4mA when (e8, e4) = (0, 0)
 	 * 8mA when (e8, e4) = (0, 1)
@@ -1069,6 +1072,9 @@ int mtk_pinconf_drive_get(struct mtk_pinctrl *hw,
 	const struct mtk_drive_desc *tb;
 	int err, val1, val2;
 
+	if (desc->drv_n == DRV_FIXED)
+		return -ENOTSUPP;
+
 	tb = &mtk_drive[desc->drv_n];
 
 	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_E4, &val1);
@@ -1095,6 +1101,9 @@ int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
 	const struct mtk_drive_desc *tb;
 	int err = -ENOTSUPP;
 
+	if (desc->drv_n == DRV_FIXED)
+		return -ENOTSUPP;
+
 	tb = &mtk_drive[desc->drv_n];
 
 	if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
@@ -1116,6 +1125,9 @@ int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
 	const struct mtk_drive_desc *tb;
 	int err, val1;
 
+	if (desc->drv_n == DRV_FIXED)
+		return -ENOTSUPP;
+
 	tb = &mtk_drive[desc->drv_n];
 
 	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, &val1);
-- 
2.56.1.750.gf70dc682cf-goog


^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2026-11-19 20:48 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20261119204748.2558209-1-lee@kernel.org>
2026-11-19 20:47 ` [PATCH v2 1/6] pinctrl: tegra186: Fix out-of-bounds register bank index for AON drive groups Lee Jones
2026-11-19 20:47 ` [PATCH v2 2/6] pinctrl: ingenic: Fix element type of x1600_sfc_funcs array Lee Jones
2026-11-19 20:47 ` [PATCH v2 3/6] pinctrl: mediatek: mt7981: Add missing entries to mt7981_ant_sel_funcs Lee Jones
2026-11-19 20:47 ` [PATCH v2 4/6] pinctrl: mediatek: Guard against NULL eint in mtk_eint_do_suspend() and mtk_eint_do_resume() Lee Jones
2026-11-19 20:47 ` [PATCH v2 5/6] pinctrl: mediatek: Clean up partially initialised hw->eint on error Lee Jones
2026-11-19 20:47 ` [PATCH v2 6/6] pinctrl: mediatek: Prevent divide-by-zero for pins with fixed drive strength Lee Jones

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox