FAILED: patch "[PATCH] platform/x86: hp-wmi: Add support for Omen 16-ap0xxx (8E35)" failed to apply to 6.18-stable tree

FAILED: patch "[PATCH] platform/x86: hp-wmi: Add support for Omen 16-ap0xxx (8E35)" failed to apply to 6.18-stable tree

[gregkh]

The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x 56b7981c6f21670c0a1a62e6d2f9afb380e2596d
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072000-unfitted-elope-1652@gregkh' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 56b7981c6f21670c0a1a62e6d2f9afb380e2596d Mon Sep 17 00:00:00 2001
From: Krishna Chomal <krishna.chomal108@gmail.com>
Date: Mon, 8 Jun 2026 19:12:55 +0530
Subject: [PATCH] platform/x86: hp-wmi: Add support for Omen 16-ap0xxx (8E35)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The HP Omen 16-ap0xxx (board ID: 8E35) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.

Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.

Testing on board 8E35 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.

Tested-by: Ahmet Öztürk <sivasli-ahmet@gmx.de>
Reported-by: Ahmet Öztürk <sivasli-ahmet@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221523
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260608134255.36280-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 079db53bf10c..8ba286ed8721 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -265,6 +265,10 @@ static const struct dmi_system_id victus_s_thermal_profile_boards[] __initconst
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8D87") },
 		.driver_data = (void *)&omen_v1_no_ec_thermal_params,
 	},
+	{
+		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8E35") },
+		.driver_data = (void *)&omen_v1_legacy_thermal_params,
+	},
 	{},
 };
 

Re: FAILED: patch "[PATCH] platform/x86: hp-wmi: Add support for Omen 16-ap0xxx (8E35)" failed to apply to 6.18-stable tree

[Krishna Chomal]

On Mon, Jul 20, 2026 at 05:29:00PM +0200, gregkh@linuxfoundation.org wrote:
>
>The patch below does not apply to the 6.18-stable tree.
>If someone wants it applied there, or to any other stable or longterm
>tree, then please email the backport, including the original git commit
>id to <stable@vger.kernel.org>.

Please drop this patch for 6.18.y. These board quirks depend on driver
refactoring in mainline commit eeeb4c9874bb7, so backporting them to 6.18
isn't feasible without porting significant driver changes. 7.1+ is fine.