[PATCH] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[PATCH] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Challvy Tee]

Commit XXXXXXXXXXXX ("x86/tdx: Disable the TDX module during kexec and
kdump") made native_machine_crash_shutdown() call tdx_sys_disable(), but
tdx_sys_disable() has no runtime gate: its only guard is compile time
(CONFIG_INTEL_TDX_HOST), which distribution kernels enable.  On a system
where the TDX module was never initialized, kdump now issues a
TDH.SYS.DISABLE SEAMCALL that it did not issue before, and the crashing
CPU stops making forward progress before machine_kexec().  The capture
kernel is never entered, no vmcore is written and nothing reaches the
console, so kdump is completely non-functional.

Having the TDX module uninitialized is an ordinary state rather than an
error.  tdx_enable() returns -ENODEV early when
X86_FEATURE_TDX_HOST_PLATFORM is absent, and it also bails out if
init_tdx_module() fails.  Any guest whose host does not expose TDX is in
this state and logs:

  virt/tdx: TDX not supported by the host platform

The syscore path is implicitly protected: register_syscore() only runs
after init_tdx_module() succeeds, so tdx_shutdown() cannot be reached on
an uninitialized system.  That covers kexec, suspend and resume, which is
why only kdump regressed.

The crash path calls tdx_sys_disable() directly and bypasses that
protection.

Where the CPU has no SEAM support the SEAMCALL raises #UD, which the
exception table entry in tdxcall.S turns into TDX_SEAMCALL_UD, so
tdx_sys_disable() just returns and kdump still works.  On SEAM capable
platforms the observed behaviour is the hang described above.

Reproduced with 'echo c > /proc/sysrq-trigger' in VM guests running on
Intel Sapphire Rapids, Emerald Rapids and Granite Rapids platforms.
Before this change no vmcore is produced; after it, kdump completes
normally.  Guests without SEAM support, and plain kexec everywhere, were
unaffected both before and after, matching the asymmetry above.

Gate the SEAMCALL on tdx_module_state.initialized, the same predicate
tdx_get_sysinfo() already uses in this file.  Putting the check inside
tdx_sys_disable() rather than at the crash.c call site also covers the
syscore caller and any future caller.

Fixes: XXXXXXXXXXXX ("x86/tdx: Disable the TDX module during kexec and kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Challvy Tee <challvy.tee@gmail.com>
---
 arch/x86/virt/vmx/tdx/tdx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index 96ced0494b68..a7eae7492c1e 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -2321,6 +2321,9 @@ void tdx_sys_disable(void)
 	struct tdx_module_args args = {};
 	u64 ret;
 
+	if (!tdx_module_state.initialized)
+		return;
+
 	/*
 	 * Don't loop forever.
 	 *
-- 
2.52.0

[PATCH v2] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Challvy Tee]

Commit 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and
kdump") made native_machine_crash_shutdown() call tdx_sys_disable(), but
tdx_sys_disable() has no runtime gate: its only guard is compile time
(CONFIG_INTEL_TDX_HOST), which is enabled in most kernel configs.  On a
system where the TDX module was never initialized, kdump now issues a
TDH.SYS.DISABLE SEAMCALL that it did not issue before, and the crash
path never reaches machine_kexec().  The capture kernel is never entered
and no vmcore is written, so kdump is completely non-functional.

Having the TDX module uninitialized is an ordinary state rather than an
error.  tdx_enable() returns -ENODEV early when
X86_FEATURE_TDX_HOST_PLATFORM is absent, and it also bails out if
init_tdx_module() fails.  Any guest whose host does not expose TDX is in
this state and logs:

  virt/tdx: TDX not supported by the host platform

The syscore path is implicitly protected: register_syscore() only runs
after init_tdx_module() succeeds, so tdx_shutdown() cannot be reached on
an uninitialized system.  That is why plain kexec still works and only
kdump regressed.

The crash path calls tdx_sys_disable() directly and bypasses that
protection.

Reproduced with 'echo c > /proc/sysrq-trigger' in VM guests on Intel
Sapphire Rapids, Emerald Rapids and Granite Rapids platforms, in every
case on a kernel that already contains the change described above: the
capture kernel is never entered and no vmcore is produced.  With this
patch applied kdump completes normally on all of them.

Three negative controls, all of which produce a vmcore as expected: the
same guests on kernels without that change, guests on platforms without
SEAM support, and plain kexec on every platform tested.

On a host where the module did initialize the new gate is a no-op and
TDH.SYS.DISABLE is still issued, so the poison clearing that the above
commit was added for is unaffected.  We do not have a TDX host to test
on, so this part is reasoned from the code rather than measured.

Gate the SEAMCALL on tdx_module_state.initialized, the same predicate
tdx_get_sysinfo() already uses in this file.  Putting the check inside
tdx_sys_disable() rather than at the crash.c call site also covers the
syscore caller and any future caller.

Fixes: 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Challvy Tee <challvy.tee@gmail.com>
---
v1 -> v2:
 - Use the real commit id 5b25f249be32 in the Fixes: tag and in the
   opening paragraph; v1 went out with a placeholder instead.
 - Drop the claim that nothing reaches the console.  panic() prints the
   message and backtrace before __crash_kexec(), so they do appear;
   describe the failure as the crash path never reaching machine_kexec()
   instead.
 - Drop the paragraph that explained why guests on platforms without
   SEAM support are unaffected.  It asserted a mechanism we have not
   verified, and the negative controls now carry the same information.
 - State explicitly that a host where the module did initialize is
   unaffected, so the poison clearing the fixed commit was added for
   still happens, and say plainly that we have no TDX host to test on.
 - Restrict the syscore claim to kexec: tdx_suspend() does not call
   tdx_sys_disable().
 - Resend with the full get_maintainer.pl recipient list.  v1 only
   reached stable@ and missed LKML and the x86 maintainers entirely.
   v1: https://lore.kernel.org/all/20261029080731.890996-1-challvy.tee@gmail.com/
 - No code change.
 arch/x86/virt/vmx/tdx/tdx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index 96ced0494b68..a7eae7492c1e 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -2321,6 +2321,9 @@ void tdx_sys_disable(void)
 	struct tdx_module_args args = {};
 	u64 ret;
 
+	if (!tdx_module_state.initialized)
+		return;
+
 	/*
 	 * Don't loop forever.
 	 *
-- 
2.52.0

Re: [PATCH v2] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Kiryl Shutsemau]

On Thu, Oct 29, 2026 at 05:47:05PM +0800, Challvy Tee wrote:
> Commit 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and
> kdump") made native_machine_crash_shutdown() call tdx_sys_disable(), but
> tdx_sys_disable() has no runtime gate: its only guard is compile time
> (CONFIG_INTEL_TDX_HOST), which is enabled in most kernel configs.  On a
> system where the TDX module was never initialized, kdump now issues a
> TDH.SYS.DISABLE SEAMCALL that it did not issue before, and the crash
> path never reaches machine_kexec().  The capture kernel is never entered
> and no vmcore is written, so kdump is completely non-functional.
> 
> Having the TDX module uninitialized is an ordinary state rather than an
> error.  tdx_enable() returns -ENODEV early when
> X86_FEATURE_TDX_HOST_PLATFORM is absent, and it also bails out if
> init_tdx_module() fails.  Any guest whose host does not expose TDX is in
> this state and logs:
> 
>   virt/tdx: TDX not supported by the host platform
> 
> The syscore path is implicitly protected: register_syscore() only runs
> after init_tdx_module() succeeds, so tdx_shutdown() cannot be reached on
> an uninitialized system.  That is why plain kexec still works and only
> kdump regressed.
> 
> The crash path calls tdx_sys_disable() directly and bypasses that
> protection.
> 
> Reproduced with 'echo c > /proc/sysrq-trigger' in VM guests on Intel
> Sapphire Rapids, Emerald Rapids and Granite Rapids platforms, in every
> case on a kernel that already contains the change described above: the
> capture kernel is never entered and no vmcore is produced.  With this
> patch applied kdump completes normally on all of them.
> 
> Three negative controls, all of which produce a vmcore as expected: the
> same guests on kernels without that change, guests on platforms without
> SEAM support, and plain kexec on every platform tested.
> 
> On a host where the module did initialize the new gate is a no-op and
> TDH.SYS.DISABLE is still issued, so the poison clearing that the above
> commit was added for is unaffected.  We do not have a TDX host to test
> on, so this part is reasoned from the code rather than measured.
> 
> Gate the SEAMCALL on tdx_module_state.initialized, the same predicate
> tdx_get_sysinfo() already uses in this file.  Putting the check inside
> tdx_sys_disable() rather than at the crash.c call site also covers the
> syscore caller and any future caller.
> 
> Fixes: 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and kdump")
> Cc: stable@vger.kernel.org
> Signed-off-by: Challvy Tee <challvy.tee@gmail.com>

The changelog is long for a three-line check, and it doesn't say why
the crash path stops. It takes time to understand what you try to fix.

A SEAMCALL that hits #UD is caught by the fixup in tdxcall.S and returns
TDX_SEAMCALL_UD; tdx_sys_disable() then leaves the loop without printing
anything. That is your no-SEAM control, and kdump works there.

On SPR and later, SEAMCALL in VMX non-root causes a VM exit instead, and
what happens next is up to the hypervisor. KVM injects #UD only since
9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute SEAMCALL
or TDCALL"); before that it is an unexpected exit reason and the VMM
gets KVM_EXIT_INTERNAL_ERROR. What hypervisor are your guests running
on? Does the host log "unexpected exit reason 0x4c"?

If that is it, kdump is broken only in guests on SEAM-capable hosts
whose hypervisor doesn't handle the exit.

The changelog should say so in a couple of paragraphs.

-- 
  Kiryl Shutsemau / Kirill A. Shutemov

[PATCH v3] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Challvy Tee]

Commit 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and
kdump") made native_machine_crash_shutdown() call tdx_sys_disable(),
whose only gate is compile time (CONFIG_INTEL_TDX_HOST).  A kernel that
never initialized the TDX module therefore still issues
TDH.SYS.DISABLE.

In VMX non-root operation on a SEAM-capable host, SEAMCALL causes a VM
exit instead of a native #UD.  KVM injects #UD only since
commit 9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute
SEAMCALL or TDCALL"), first released in v6.18.  On an older host the
VMM gets KVM_EXIT_INTERNAL_ERROR and the vCPU never resumes, so
machine_kexec() is never reached and no vmcore is written.  Kdump is
thus broken only in guests on SEAM-capable hosts whose hypervisor does
not handle the exit; plain kexec is unaffected because tdx_shutdown()
only runs as a syscore op, registered after init_tdx_module() succeeds.

Gate the SEAMCALL on tdx_module_state.initialized, the predicate
tdx_get_sysinfo() already uses in this file: a kernel that never
initialized the module has no module to disable, and where it did the
gate is a no-op.  Doing it here rather than at the crash.c call site
also covers the syscore caller and any future one.

It also decouples kdump from the host KVM version -- a guest cannot
require its host to inject the #UD.

Fixes: 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Challvy Tee <challvy.tee@gmail.com>
---
v2 -> v3:
 - Rework the changelog around the VM exit mechanism from the review
   and scope the impact to guests on SEAM-capable hosts whose
   hypervisor does not handle the exit.
 - Shorten it and move the reproduction data below the fold.
 - Cc the author of the KVM commit now cited.  No code change.
   v2: https://lore.kernel.org/all/20261029094705.896693-1-challvy.tee@gmail.com/

Hypervisor -- KVM on all five (CPUID leaf 0x40000000), across three
clouds: Alibaba Cloud ECS, AWS EC2 and Tencent Cloud CVM.

Host log -- yes, from the Alibaba ECS host of the Emerald Rapids guest:

  KVM internal error. Suberror: 4
  extra data[0]: 4c
  extra data[1]: 2f
  RAX=0000000000000045 RDI=0000000000000045 RIP=ffffffff855422fe
  R12=8000020300000000 R13=8000000300000000 R14=8000020200000000
  Code=... 4c 8b 5e 28 <66> 0f 01 cf 72 05 ...
  check runstate transition: 'running' -> 'internal-error'

Suberror 4 is KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON; the two data
words are the exit reason (0x4c = EXIT_REASON_SEAMCALL) and
last_vmentry_cpu, i.e. kvm_prepare_unexpected_reason_exit().

RAX and RDI hold 0x45 = TDH_SYS_DISABLE and RIP is at the '66 0f 01 cf'
SEAMCALL opcode in __seamcall.  RAX still holds the input leaf rather
than a status code: the SEAMCALL never returned.

Reproduced with 'echo c > /proc/sysrq-trigger'.  All five have
CONFIG_INTEL_TDX_HOST=y, kexec_crash_loaded=1, a kernel changelog
naming both backported commits, and "TDX not supported by the host
platform" in dmesg:

  Microarch          x86_vfm  Cloud          Kernel             echo c
  Sapphire Rapids    0x68F    AWS EC2        6.12.0-278.el10    no vmcore
  Emerald Rapids     0x6CF    Alibaba ECS    6.12.0-278.el10    no vmcore
  Granite Rapids     0x6AD    Alibaba ECS    6.12.0-278.el10    no vmcore
  Granite Rapids     0x6AD    AWS EC2        6.12.0-278.el10    no vmcore
  Granite Rapids     0x6AD    Tencent CVM    6.12.0-278.el10    no vmcore

Controls, each producing a vmcore: the same platform on a kernel
without 5b25f249be32 (tdx_sys_disable absent from kallsyms), platforms
without SEAM support (Skylake, Cascade Lake, Ice Lake, AMD), and plain
kexec.

With the gate applied kdump produces a vmcore on the two Alibaba ECS
guests; the others have not been retested.  No TDX host was available,
so the no-op case is reasoned from the code rather than measured.

 arch/x86/virt/vmx/tdx/tdx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index 96ced0494b68..a7eae7492c1e 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -2321,6 +2321,9 @@ void tdx_sys_disable(void)
 	struct tdx_module_args args = {};
 	u64 ret;
 
+	if (!tdx_module_state.initialized)
+		return;
+
 	/*
 	 * Don't loop forever.
 	 *
-- 
2.52.0

Re: [PATCH v3] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Dave Hansen]

On 10/30/26 08:48, Challvy Tee wrote:
> --- a/arch/x86/virt/vmx/tdx/tdx.c
> +++ b/arch/x86/virt/vmx/tdx/tdx.c
> @@ -2321,6 +2321,9 @@ void tdx_sys_disable(void)
>  	struct tdx_module_args args = {};
>  	u64 ret;
>  
> +	if (!tdx_module_state.initialized)
> +		return;

NAK from me on this.

If SEAMCALL is fatal then we need stronger barriers on the generic paths
to SEAMCALLs themselves, not one-off patches of the sites.

Re: [PATCH v3] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Kiryl Shutsemau]

On Fri, Oct 30, 2026 at 09:13:12AM -0700, Dave Hansen wrote:
> On 10/30/26 08:48, Challvy Tee wrote:
> > --- a/arch/x86/virt/vmx/tdx/tdx.c
> > +++ b/arch/x86/virt/vmx/tdx/tdx.c
> > @@ -2321,6 +2321,9 @@ void tdx_sys_disable(void)
> >  	struct tdx_module_args args = {};
> >  	u64 ret;
> >  
> > +	if (!tdx_module_state.initialized)
> > +		return;
> 
> NAK from me on this.
> 
> If SEAMCALL is fatal then we need stronger barriers on the generic paths
> to SEAMCALLs themselves, not one-off patches of the sites.

I don't think the generic path is the right place for it. For every
other caller, reaching a SEAMCALL on a non-TDX system means something
went wrong higher up, and we want to see it. A check there that quietly
returns an error hides that. Making it WARN would catch it, but then the
crash path would still need its own check before the call.

So gate the call on X86_FEATURE_TDX_HOST_PLATFORM, the same way
paddr_is_tdx_private() does.

-- 
  Kiryl Shutsemau / Kirill A. Shutemov

Re: [PATCH v3] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Dave Hansen]

On 10/30/26 09:26, Kiryl Shutsemau wrote:
>>
>> If SEAMCALL is fatal then we need stronger barriers on the generic paths
>> to SEAMCALLs themselves, not one-off patches of the sites.
> I don't think the generic path is the right place for it. For every
> other caller, reaching a SEAMCALL on a non-TDX system means something
> went wrong higher up, and we want to see it. A check there that quietly
> returns an error hides that. Making it WARN would catch it, but then the
> crash path would still need its own check before the call.
> 
> So gate the call on X86_FEATURE_TDX_HOST_PLATFORM, the same way
> paddr_is_tdx_private() does.

Sounds fine to me.

[PATCH v4] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Challvy Tee]

Commit 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and
kdump") made native_machine_crash_shutdown() call tdx_sys_disable(),
whose only gate is compile time (CONFIG_INTEL_TDX_HOST).  A kernel that
never initialized the TDX module therefore still issues
TDH.SYS.DISABLE.

In VMX non-root operation on a SEAM-capable host, SEAMCALL causes a VM
exit instead of a native #UD.  KVM injects #UD only since
commit 9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute
SEAMCALL or TDCALL"), first released in v6.18.  On an older host the
VMM gets KVM_EXIT_INTERNAL_ERROR and the vCPU never resumes, so
machine_kexec() is never reached and no vmcore is written.  Kdump is
thus broken only in guests on SEAM-capable hosts whose hypervisor does
not handle the exit; plain kexec is unaffected because tdx_shutdown()
only runs as a syscore op, registered after init_tdx_module() succeeds.

Gate the SEAMCALL on X86_FEATURE_TDX_HOST_PLATFORM before issuing it,
the way paddr_is_tdx_private() already guards its own SEAMCALL in this
file.  Without that feature the module is never initialized, so there
is nothing to disable; on a TDX host the gate is a no-op.

It also decouples kdump from the host KVM version -- a guest cannot
require its host to inject the #UD.

Fixes: 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and kdump")
Suggested-by: Kiryl Shutsemau <kas@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Challvy Tee <challvy.tee@gmail.com>
---
v3 -> v4:
 - Gate on X86_FEATURE_TDX_HOST_PLATFORM instead of
   tdx_module_state.initialized, guarding the SEAMCALL itself the way
   paddr_is_tdx_private() already does, as suggested in review.
 - Drop the v3 rationale about covering the syscore and future callers.
 - Retested with this predicate: kdump produces a vmcore on the
   Alibaba ECS Emerald Rapids guest (6.12.0-278.el10 base).
   v3: https://lore.kernel.org/all/20261030154851.907726-1-challvy.tee@gmail.com/

Hypervisor -- KVM on all five (CPUID leaf 0x40000000), across three
clouds: Alibaba Cloud ECS, AWS EC2 and Tencent Cloud CVM.

Host log -- yes, from the Alibaba ECS host of the Emerald Rapids guest:

  KVM internal error. Suberror: 4
  extra data[0]: 4c
  extra data[1]: 2f
  RAX=0000000000000045 RDI=0000000000000045 RIP=ffffffff855422fe
  R12=8000020300000000 R13=8000000300000000 R14=8000020200000000
  Code=... 4c 8b 5e 28 <66> 0f 01 cf 72 05 ...
  check runstate transition: 'running' -> 'internal-error'

Suberror 4 is KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON; the two data
words are the exit reason (0x4c = EXIT_REASON_SEAMCALL) and
last_vmentry_cpu, i.e. kvm_prepare_unexpected_reason_exit().

RAX and RDI hold 0x45 = TDH_SYS_DISABLE and RIP is at the '66 0f 01 cf'
SEAMCALL opcode in __seamcall.  RAX still holds the input leaf rather
than a status code: the SEAMCALL never returned.

Reproduced with 'echo c > /proc/sysrq-trigger'.  All five have
CONFIG_INTEL_TDX_HOST=y, kexec_crash_loaded=1, a kernel changelog
naming both backported commits, and "TDX not supported by the host
platform" in dmesg:

  Microarch          x86_vfm  Cloud          Kernel             echo c
  Sapphire Rapids    0x68F    AWS EC2        6.12.0-278.el10    no vmcore
  Granite Rapids     0x6AD    AWS EC2        6.12.0-278.el10    no vmcore
  Emerald Rapids     0x6CF    Alibaba ECS    6.12.0-278.el10    no vmcore
  Granite Rapids     0x6AD    Alibaba ECS    6.12.0-278.el10    no vmcore
  Granite Rapids     0x6AD    Tencent CVM    6.12.0-278.el10    no vmcore

That dmesg line is printed by tdx_enable() when
X86_FEATURE_TDX_HOST_PLATFORM is clear, so the feature this patch tests
is absent on all five.

Controls, each producing a vmcore: the same platform on a kernel
without 5b25f249be32 (tdx_sys_disable absent from kallsyms), platforms
without SEAM support (Skylake, Cascade Lake, Ice Lake, AMD), and plain
kexec.

With the gate applied kdump produces a vmcore on the Alibaba ECS
Emerald Rapids guest, retested with this predicate.  The Granite
Rapids guest was verified with the v3 predicate and not re-run; the
AWS and Tencent guests are reproduction evidence only.  No TDX host was
available, so the no-op case is reasoned from the code, not measured.

 arch/x86/virt/vmx/tdx/tdx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index 96ced0494b68..9b01131f7b7b 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -2321,6 +2321,9 @@ void tdx_sys_disable(void)
 	struct tdx_module_args args = {};
 	u64 ret;
 
+	if (!boot_cpu_has(X86_FEATURE_TDX_HOST_PLATFORM))
+		return;
+
 	/*
 	 * Don't loop forever.
 	 *
-- 
2.52.0

Re: [PATCH v4] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Kiryl Shutsemau]

On Mon, Nov 02, 2026 at 03:32:44PM +0800, Challvy Tee wrote:
> Commit 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and
> kdump") made native_machine_crash_shutdown() call tdx_sys_disable(),
> whose only gate is compile time (CONFIG_INTEL_TDX_HOST).  A kernel that
> never initialized the TDX module therefore still issues
> TDH.SYS.DISABLE.
> 
> In VMX non-root operation on a SEAM-capable host, SEAMCALL causes a VM
> exit instead of a native #UD.  KVM injects #UD only since
> commit 9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute
> SEAMCALL or TDCALL"), first released in v6.18.  On an older host the
> VMM gets KVM_EXIT_INTERNAL_ERROR and the vCPU never resumes, so
> machine_kexec() is never reached and no vmcore is written.  Kdump is
> thus broken only in guests on SEAM-capable hosts whose hypervisor does
> not handle the exit; plain kexec is unaffected because tdx_shutdown()
> only runs as a syscore op, registered after init_tdx_module() succeeds.
> 
> Gate the SEAMCALL on X86_FEATURE_TDX_HOST_PLATFORM before issuing it,
> the way paddr_is_tdx_private() already guards its own SEAMCALL in this
> file.  Without that feature the module is never initialized, so there
> is nothing to disable; on a TDX host the gate is a no-op.
> 
> It also decouples kdump from the host KVM version -- a guest cannot
> require its host to inject the #UD.
> 
> Fixes: 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and kdump")
> Suggested-by: Kiryl Shutsemau <kas@kernel.org>
> Cc: stable@vger.kernel.org
> Signed-off-by: Challvy Tee <challvy.tee@gmail.com>

Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>

-- 
  Kiryl Shutsemau / Kirill A. Shutemov

Re: [PATCH v4] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Edgecombe, Rick P]

On Mon, 2026-11-02 at 15:32 +0800, Challvy Tee wrote:
> Commit 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and
> kdump") made native_machine_crash_shutdown() call tdx_sys_disable(),
> whose only gate is compile time (CONFIG_INTEL_TDX_HOST).  A kernel that
> never initialized the TDX module therefore still issues
> TDH.SYS.DISABLE.
> 
> In VMX non-root operation on a SEAM-capable host, SEAMCALL causes a VM
> exit instead of a native #UD.  KVM injects #UD only since
> commit 9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute
> SEAMCALL or TDCALL"), first released in v6.18.  On an older host the
> VMM gets KVM_EXIT_INTERNAL_ERROR and the vCPU never resumes, so
> machine_kexec() is never reached and no vmcore is written.  Kdump is
> thus broken only in guests on SEAM-capable hosts whose hypervisor does
> not handle the exit; plain kexec is unaffected because tdx_shutdown()
> only runs as a syscore op, registered after init_tdx_module() succeeds.
> 
> Gate the SEAMCALL on X86_FEATURE_TDX_HOST_PLATFORM before issuing it,
> the way paddr_is_tdx_private() already guards its own SEAMCALL in this
> file.  Without that feature the module is never initialized, so there
> is nothing to disable; on a TDX host the gate is a no-op.
> 
> It also decouples kdump from the host KVM version -- a guest cannot
> require its host to inject the #UD.
> 
> Fixes: 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and kdump")
> Suggested-by: Kiryl Shutsemau <kas@kernel.org>
> Cc: stable@vger.kernel.org
> Signed-off-by: Challvy Tee <challvy.tee@gmail.com>
> ---

Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>

Re: [PATCH v4] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

[Verma, Vishal L]

On Mon, 2026-11-02 at 15:32 +0800, Challvy Tee wrote:

> Subject: [PATCH] x86/virt/tdx: Skip TDH.SYS.DISABLE if the TDX module is not initialized

I think the subject should be updated to reflect the new check -
X86_FEATURE_TDX_HOST_PLATFORM, and not tdx module initialized?

> Commit 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and
> kdump") made native_machine_crash_shutdown() call tdx_sys_disable(),
> whose only gate is compile time (CONFIG_INTEL_TDX_HOST).  A kernel that
> never initialized the TDX module therefore still issues
> TDH.SYS.DISABLE.
> 
> In VMX non-root operation on a SEAM-capable host, SEAMCALL causes a VM
> exit instead of a native #UD.  KVM injects #UD only since
> commit 9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute
> SEAMCALL or TDCALL"), first released in v6.18.  On an older host the
> VMM gets KVM_EXIT_INTERNAL_ERROR and the vCPU never resumes, so
> machine_kexec() is never reached and no vmcore is written.  Kdump is
> thus broken only in guests on SEAM-capable hosts whose hypervisor does
> not handle the exit; plain kexec is unaffected because tdx_shutdown()
> only runs as a syscore op, registered after init_tdx_module() succeeds.
> 
> Gate the SEAMCALL on X86_FEATURE_TDX_HOST_PLATFORM before issuing it,
> the way paddr_is_tdx_private() already guards its own SEAMCALL in this
> file.  Without that feature the module is never initialized, so there
> is nothing to disable; on a TDX host the gate is a no-op.
> 
> It also decouples kdump from the host KVM version -- a guest cannot
> require its host to inject the #UD.
> 
> Fixes: 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and kdump")
> Suggested-by: Kiryl Shutsemau <kas@kernel.org>
> Cc: stable@vger.kernel.org
> Signed-off-by: Challvy Tee <challvy.tee@gmail.com>
> ---

Other than that, looks good to me.

Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>

[PATCH v5] x86/virt/tdx: Gate TDH.SYS.DISABLE on X86_FEATURE_TDX_HOST_PLATFORM

[Challvy Tee]

Commit 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and
kdump") made native_machine_crash_shutdown() call tdx_sys_disable(),
whose only gate is compile time (CONFIG_INTEL_TDX_HOST).  A kernel that
never initialized the TDX module therefore still issues
TDH.SYS.DISABLE.

In VMX non-root operation on a SEAM-capable host, SEAMCALL causes a VM
exit instead of a native #UD.  KVM injects #UD only since
commit 9d7dfb95da2c ("KVM: VMX: Inject #UD if guest tries to execute
SEAMCALL or TDCALL"), first released in v6.18.  On an older host the
VMM gets KVM_EXIT_INTERNAL_ERROR and the vCPU never resumes, so
machine_kexec() is never reached and no vmcore is written.  Kdump is
thus broken only in guests on SEAM-capable hosts whose hypervisor does
not handle the exit; plain kexec is unaffected because tdx_shutdown()
only runs as a syscore op, registered after init_tdx_module() succeeds.

Gate the SEAMCALL on X86_FEATURE_TDX_HOST_PLATFORM before issuing it,
the way paddr_is_tdx_private() already guards its own SEAMCALL in this
file.  Without that feature the module is never initialized, so there
is nothing to disable; on a TDX host the gate is a no-op.

It also decouples kdump from the host KVM version -- a guest cannot
require its host to inject the #UD.

Fixes: 5b25f249be32 ("x86/tdx: Disable the TDX module during kexec and kdump")
Suggested-by: Kiryl Shutsemau <kas@kernel.org>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Challvy Tee <challvy.tee@gmail.com>
---
v4 -> v5:
 - Update the subject to name the X86_FEATURE_TDX_HOST_PLATFORM check,
   as requested in review.  No code change.
 - Add the Reviewed-by tags collected on v4.

The reproduction data and the host-side KVM log are unchanged from v4:
https://lore.kernel.org/all/20261102073244.919864-1-challvy.tee@gmail.com/

 arch/x86/virt/vmx/tdx/tdx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index 96ced0494b68..9b01131f7b7b 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -2321,6 +2321,9 @@ void tdx_sys_disable(void)
 	struct tdx_module_args args = {};
 	u64 ret;
 
+	if (!boot_cpu_has(X86_FEATURE_TDX_HOST_PLATFORM))
+		return;
+
 	/*
 	 * Don't loop forever.
 	 *
-- 
2.52.0