From: "Souza, Jose" <jose.souza@intel.com>
To: "Roper, Matthew D" <matthew.d.roper@intel.com>,
"henning.schild@siemens.com" <henning.schild@siemens.com>
Cc: "Wagner, Dominik" <wagner.dominik@siemens.com>,
"holger.philipps@siemens.com" <holger.philipps@siemens.com>,
"stable@vger.kernel.org" <stable@vger.kernel.org>,
"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Subject: Re: [PATCH 5.10 0/2] backport i915 fixes to 5.10
Date: Fri, 2 Jun 2023 16:43:54 +0000 [thread overview]
Message-ID: <bfd9ed85b0c4c58a8ad830462271da3195d23ac5.camel@intel.com> (raw)
In-Reply-To: <20230602183308.6669c7fe@md1za8fc.ad001.siemens.net>
On Fri, 2023-06-02 at 18:33 +0200, Henning Schild wrote:
> Am Fri, 2 Jun 2023 09:14:08 -0700
> schrieb Matt Roper <matthew.d.roper@intel.com>:
>
> > On Fri, Jun 02, 2023 at 06:05:05PM +0200, Henning Schild wrote:
> > > This fixes the following problem which was seen on a Tigerlake
> > > running Debian 10 with a 5.10 kernel.
> > >
> > > [ 111.408631] Missing case (val == 65535)
> > > [ 111.408698] WARNING: CPU: 2 PID: 446 at
> > > drivers/gpu/drm/i915/intel_dram.c:95
> > > skl_dram_get_dimm_info+0x72/0x1a0 [i915] [ 111.408699] Modules
> > > linked in: intel_powerclamp coretemp i915(+) joydev kvm_intel kvm
> > > hid_generic irqbypass crc32_pclmul snd_hda_intel
> > > ghash_clmulni_intel snd_intel_dspcfg snd_hda_codec aesni_intel
> > > glue_helper crypto_simd cryptd snd_hwdep snd_hda_core
> > > drm_kms_helper uas snd_pcm usb_storage intel_cstate mei_wdt
> > > mei_hdcp snd_timer scsi_mod usbhid hid cec wdat_wdt snd mei_me
> > > evdev mei intel_uncore rc_core watchdog pcspkr soundcore video
> > > acpi_pad acpi_tad button drm fuse configfs loop(+) efi_pstore
> > > efivarfs ip_tables x_tables autofs4 ext4 crc32c_generic crc16
> > > mbcache jbd2 dm_mod xhci_pci xhci_hcd marvell dwmac_intel stmmac
> > > igb e1000e usbcore nvme nvme_core pcs_xpcs phylink libphy
> > > i2c_algo_bit t10_pi dca crc_t10dif crct10dif_generic intel_lpss_pci
> > > ptp vmd intel_lpss i2c_i801 crct10dif_pclmul pps_core
> > > crct10dif_common idma64 usb_common crc32c_intel i2c_smbus [
> > > 111.408755] CPU: 2 PID: 446 Comm: (udev-worker) Not tainted
> > > 5.10.180 #2 [ 111.408756] Hardware name: SIEMENS AG SIMATIC
> > > IPC427G/no information, BIOS T29.01.02.D3.0 10/11/2022 [
> > > 111.408797] RIP: 0010:skl_dram_get_dimm_info+0x72/0x1a0 [i915] [
> > > 111.408799] Code: 01 00 00 0f 84 31 01 00 00 66 3d 00 01 0f 84 27
> > > 01 00 00 41 0f b7 d0 48 c7 c6 ba 81 7c c1 48 c7 c7 be 81 7c c1 e8
> > > d2 75 89 fa <0f> 0b c6 45 01 00 44 0f b6 4d 00 31 f6 b9 01 00 00 00
> > > c1 fb 09 83 [ 111.408801] RSP: 0018:ffffa23a40b53b10 EFLAGS:
> > > 00010286 [ 111.408802] RAX: 0000000000000000 RBX: 000000000000ffff
> > > RCX: 0000000000000027 [ 111.408803] RDX: ffff947b278a0908 RSI:
> > > 0000000000000001 RDI: ffff947b278a0900 [ 111.408804] RBP:
> > > ffffa23a40b53b78 R08: 0000000000000000 R09: ffffa23a40b53920 [
> > > 111.408805] R10: ffffa23a40b53918 R11: 0000000000000003 R12:
> > > 0000000000000000 [ 111.408806] R13: 000000000000004c R14:
> > > ffff9479b1a00000 R15: ffff9479b1a00000 [ 111.408808] FS:
> > > 00007ff9626478c0(0000) GS:ffff947b27880000(0000)
> > > knlGS:0000000000000000 [ 111.408809] CS: 0010 DS: 0000 ES: 0000
> > > CR0: 0000000080050033 [ 111.408810] CR2: 0000555753cbf15c CR3:
> > > 0000000108432002 CR4: 0000000000770ee0 [ 111.408810] PKRU:
> > > 55555554 [ 111.408811] Call Trace: [ 111.408854]
> > > skl_dram_get_channel_info+0x24/0x160 [i915] [ 111.408892]
> > > intel_dram_detect+0xef/0x630 [i915] [ 111.408931]
> > > i915_driver_probe+0xb18/0xc40 [i915] [ 111.408969] ?
> > > i915_pci_probe+0x3f/0x160 [i915] [ 111.408973]
> > > local_pci_probe+0x3b/0x80 [ 111.408975]
> > > pci_device_probe+0xfc/0x1b0 [ 111.408979]
> > > really_probe+0x26e/0x460 [ 111.408981]
> > > driver_probe_device+0xb4/0x100 [ 111.408983]
> > > device_driver_attach+0xa9/0xb0 [ 111.408984] ?
> > > device_driver_attach+0xb0/0xb0 [ 111.408985]
> > > __driver_attach+0xa1/0x140 [ 111.408987] ?
> > > device_driver_attach+0xb0/0xb0 [ 111.408989]
> > > bus_for_each_dev+0x84/0xd0 [ 111.408991]
> > > bus_add_driver+0x13e/0x200 [ 111.408993]
> > > driver_register+0x89/0xe0 [ 111.409036] i915_init+0x60/0x75
> > > [i915] [ 111.409038] ? 0xffffffffc18b8000 [ 111.409041]
> > > do_one_initcall+0x56/0x1f0 [ 111.409044]
> > > do_init_module+0x4a/0x240 [ 111.409047]
> > > __do_sys_finit_module+0xaa/0x110 [ 111.409050]
> > > do_syscall_64+0x30/0x40 [ 111.409053]
> > > entry_SYSCALL_64_after_hwframe+0x61/0xc6 [ 111.409054] RIP:
> > > 0033:0x7ff962d534f9 [ 111.409056] Code: 08 89 e8 5b 5d c3 66 2e 0f
> > > 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89
> > > c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b
> > > 0d d7 08 0d 00 f7 d8 64 89 01 48 [ 111.409057] RSP:
> > > 002b:00007fff57caf5d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [
> > > 111.409058] RAX: ffffffffffffffda RBX: 0000555753cad120 RCX:
> > > 00007ff962d534f9 [ 111.409059] RDX: 0000000000000000 RSI:
> > > 00007ff962ee6efd RDI: 0000000000000010 [ 111.409060] RBP:
> > > 00007ff962ee6efd R08: 0000000000000000 R09: 0000555753c7a320 [
> > > 111.409061] R10: 0000000000000010 R11: 0000000000000246 R12:
> > > 0000000000020000 [ 111.409062] R13: 0000000000000000 R14:
> > > 0000555753ca4f30 R15: 0000555752d40e4f [ 111.409064] ---[ end
> > > trace 2da6ec0bd6f7c3a1 ]---
> > >
> > >
> > > José Roberto de Souza (1):
> > > drm/i915/gen11+: Only load DRAM information from pcode
> > >
> > > Matt Roper (1):
> > > drm/i915/dg1: Wait for pcode/uncore handshake at startup
> >
> > This second patch should only be needed for discrete GPUs (none of
> > which are fully enabled on a 5.10 kernel). Are you seeing it cause a
> > change in behavior on an integrated TGL platform?
>
> When i started looking at things i thought it would be a bisect job,
> because Debian 12 with 6.1 is not affected.
> Then i found a ubuntu bug and basically just applied the patch that bug
> was talking about (p2)
>
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1933274
>
> which needs p1 for that new function
>
> Having both applied the problem i did see is indeed gone. Not that i
> understand what that code does in depth.
>
> I think it is Tigerlake but i always have a hard time with the "lakes"
>
> CPU:
> Intel(R) Xeon(R) W-11865MLE @ 1.50GHz
W-11865MLE integrated GPU.
>
> which to me suggests "discrete GPU"
>
> Henning
>
> >
> > Matt
> >
> > >
> > > drivers/gpu/drm/i915/display/intel_bw.c | 80
> > > +++--------------------- drivers/gpu/drm/i915/i915_drv.c |
> > > 4 ++ drivers/gpu/drm/i915/i915_drv.h | 1 +
> > > drivers/gpu/drm/i915/i915_reg.h | 3 +
> > > drivers/gpu/drm/i915/intel_dram.c | 82
> > > ++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_sideband.c |
> > > 15 +++++ drivers/gpu/drm/i915/intel_sideband.h | 2 +
> > > 7 files changed, 114 insertions(+), 73 deletions(-)
> > >
> > > --
> > > 2.39.3
> > >
> > >
> >
>
next prev parent reply other threads:[~2023-06-02 16:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-02 16:05 [PATCH 5.10 0/2] backport i915 fixes to 5.10 Henning Schild
2023-06-02 16:05 ` [PATCH 5.10 1/2] drm/i915/dg1: Wait for pcode/uncore handshake at startup Henning Schild
2023-06-07 18:09 ` Greg Kroah-Hartman
2023-06-12 7:30 ` Henning Schild
2023-06-15 0:17 ` Matt Roper
2023-06-15 7:10 ` Henning Schild
2023-06-02 16:05 ` [PATCH 5.10 2/2] drm/i915/gen11+: Only load DRAM information from pcode Henning Schild
2023-06-02 16:14 ` [PATCH 5.10 0/2] backport i915 fixes to 5.10 Matt Roper
2023-06-02 16:33 ` Henning Schild
2023-06-02 16:43 ` Souza, Jose [this message]
2023-06-02 17:03 ` Henning Schild
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bfd9ed85b0c4c58a8ad830462271da3195d23ac5.camel@intel.com \
--to=jose.souza@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=henning.schild@siemens.com \
--cc=holger.philipps@siemens.com \
--cc=matthew.d.roper@intel.com \
--cc=stable@vger.kernel.org \
--cc=wagner.dominik@siemens.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox