[PATCH v6] scsi: ufs: Change the error check sequence for auto hibern8

[PATCH v6] scsi: ufs: Change the error check sequence for auto hibern8

[HOYOUNG SEO]

Auto-hibern8 enter and exit are performed by the host controller without
a UIC command, and the auto-hibern8 idle timer only runs while no UIC
command is outstanding. An auto-hibern8 error (IS.UHES or IS.UHXS) is
therefore usually reported while hba->active_uic_cmd is NULL.

Since commit fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl()
easier to analyze"), ufshcd_uic_cmd_compl() returns early when
hba->active_uic_cmd is NULL, before ufshcd_is_auto_hibern8_error() is
called. Such auto-hibern8 errors are no longer recorded in hba->errors,
so ufshcd_check_errors() is not called for them and the error handler is
not scheduled.

Check for auto-hibern8 errors before checking for an active UIC command,
as was done before that commit, but keep returning early when there is
no active UIC command so that a NULL cmd is never dereferenced. Only
report the missing UIC command if no auto-hibern8 error was found.

Fixes: fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyze")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: HOYOUNG SEO <hy50.seo@samsung.com>
Reviewed-by: Stanley Jhu <stanleyjhu@google.com>
---
Changes in v6:
 - Add the missing "Cc: stable@vger.kernel.org" tag next to the Fixes tag
   and keep the tags in one block (Bart Van Assche, Stanley Jhu).
 - Add Stanley's Reviewed-by. No code change.

Changes in v5:
 - Fix the unmatched brace in ufshcd_uic_cmd_compl() that broke the build
   in v4 (Stanley Jhu, Sashiko, kernel test robot).
 - Use a local bool for the ufshcd_is_auto_hibern8_error() result instead
   of testing hba->errors (Bart Van Assche).
 - Move the Signed-off-by above the "---" line and Cc stable.
 - Link to all previous versions.

Changes in v4:
 - Changed patch version

Changes in v3:
 - Check auto-hibern8 errors before the NULL check again, so that errors
   reported while a non-hibernate UIC command is active are still
   detected (Sashiko review).
 - Return early when no UIC command is active instead of falling
   through, to avoid dereferencing a NULL cmd (Sashiko review).
 - Add Fixes tag, reword subject and commit message.

Changes in v2:
 - Check UFSHCD_UIC_HIBERN8_MASK for auto-hibern8 only when cmd is NULL.

v1: https://lore.kernel.org/linux-scsi/20261021051951.1687479-1-hy50.seo@samsung.com/
v2: https://lore.kernel.org/linux-scsi/20261022074249.3098100-1-hy50.seo@samsung.com/
v3: https://lore.kernel.org/linux-scsi/20261026051851.1845934-1-hy50.seo@samsung.com/
v4: https://lore.kernel.org/linux-scsi/20261026052632.1848929-1-hy50.seo@samsung.com/
v5: https://lore.kernel.org/linux-scsi/20261027021037.3398180-1-hy50.seo@samsung.com/

 drivers/ufs/core/ufshcd.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index d085d394858f..c08278a2e43e 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5939,18 +5939,26 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
 {
 	irqreturn_t retval = IRQ_NONE;
 	struct uic_command *cmd;
+	bool ah8_err;
 
 	guard(spinlock_irqsave)(&hba->host->host_lock);
+
+	/*
+	 * Auto-hibern8 is performed without a UIC command, so check for
+	 * auto-hibern8 errors before checking for an active UIC command.
+	 */
+	ah8_err = ufshcd_is_auto_hibern8_error(hba, intr_status);
+	if (ah8_err)
+		hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status);
+
 	cmd = hba->active_uic_cmd;
 	if (!cmd) {
-		dev_err(hba->dev,
-			"No active UIC command. Maybe a timeout occurred?\n");
+		if (!ah8_err)
+			dev_err(hba->dev,
+				"No active UIC command. Maybe a timeout occurred?\n");
 		return retval;
 	}
 
-	if (ufshcd_is_auto_hibern8_error(hba, intr_status))
-		hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status);
-
 	if (intr_status & UIC_COMMAND_COMPL) {
 		/*
 		 * Store the UIC command result in the lowest byte of
-- 
2.34.1

Re: [PATCH v6] scsi: ufs: Change the error check sequence for auto hibern8

[Bean Huo]

On Tue, 2026-10-27 at 20:03 +0900, HOYOUNG SEO wrote:
> Auto-hibern8 enter and exit are performed by the host controller without
> a UIC command, and the auto-hibern8 idle timer only runs while no UIC
> command is outstanding. An auto-hibern8 error (IS.UHES or IS.UHXS) is
> therefore usually reported while hba->active_uic_cmd is NULL.
> 
> Since commit fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl()
> easier to analyze"), ufshcd_uic_cmd_compl() returns early when
> hba->active_uic_cmd is NULL, before ufshcd_is_auto_hibern8_error() is
> called. Such auto-hibern8 errors are no longer recorded in hba->errors,
> so ufshcd_check_errors() is not called for them and the error handler is
> not scheduled.
> 
> Check for auto-hibern8 errors before checking for an active UIC command,
> as was done before that commit, but keep returning early when there is
> no active UIC command so that a NULL cmd is never dereferenced. Only
> report the missing UIC command if no auto-hibern8 error was found.
> 
> Fixes: fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to
> analyze")
> Cc: stable@vger.kernel.org # v6.13+
> Signed-off-by: HOYOUNG SEO <hy50.seo@samsung.com>
> Reviewed-by: Stanley Jhu <stanleyjhu@google.com>


Reviewed-by: Bean Huo <beanhuo@micron.com>

Re: [PATCH v6] scsi: ufs: Change the error check sequence for auto hibern8

[Bart Van Assche]

On 10/27/26 4:03 AM, HOYOUNG SEO wrote:
> Auto-hibern8 enter and exit are performed by the host controller without
> a UIC command, and the auto-hibern8 idle timer only runs while no UIC
> command is outstanding. An auto-hibern8 error (IS.UHES or IS.UHXS) is
> therefore usually reported while hba->active_uic_cmd is NULL.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6] scsi: ufs: Change the error check sequence for auto hibern8

[Martin K. Petersen]

Hoyoung,

> Auto-hibern8 enter and exit are performed by the host controller
> without a UIC command, and the auto-hibern8 idle timer only runs while
> no UIC command is outstanding. An auto-hibern8 error (IS.UHES or
> IS.UHXS) is therefore usually reported while hba->active_uic_cmd is
> NULL.

Applied to 7.4/scsi-staging, thanks!

-- 
Martin K. Petersen

Re: [PATCH v6] scsi: ufs: Change the error check sequence for auto hibern8

[Martin K. Petersen (Oracle)]

On Tue, 27 Oct 2026 20:03:57 +0900, HOYOUNG SEO wrote:

> Auto-hibern8 enter and exit are performed by the host controller without
> a UIC command, and the auto-hibern8 idle timer only runs while no UIC
> command is outstanding. An auto-hibern8 error (IS.UHES or IS.UHXS) is
> therefore usually reported while hba->active_uic_cmd is NULL.
> 
> Since commit fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl()
> easier to analyze"), ufshcd_uic_cmd_compl() returns early when
> hba->active_uic_cmd is NULL, before ufshcd_is_auto_hibern8_error() is
> called. Such auto-hibern8 errors are no longer recorded in hba->errors,
> so ufshcd_check_errors() is not called for them and the error handler is
> not scheduled.
> 
> [...]

Applied to 7.4/scsi-queue, thanks!

[1/1] scsi: ufs: Change the error check sequence for auto hibern8
      https://git.kernel.org/mkp/scsi/c/6b2ff2b3eafa

-- 
Martin K. Petersen