tpmdd-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Jason Gunthorpe
	<jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Cc: "Martin Wilck"
	<Martin.Wilck-RJz4owOZxyXQFUHtdCDX3A@public.gmane.org>,
	tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"Uwe Kleine-König"
	<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: Re: [PATCH v3 6/7] tpm_crb: Drop le32_to_cpu(ioread32(..))
Date: Sun, 3 Jan 2016 19:28:01 +0200	[thread overview]
Message-ID: <20160103172801.GE4155@intel.com> (raw)
In-Reply-To: <1450376600-6970-7-git-send-email-jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>

On Thu, Dec 17, 2015 at 11:23:19AM -0700, Jason Gunthorpe wrote:
> ioread32 and readl are defined to read from PCI style memory, ie little
> endian and return the result in host order. On platforms where a
> swap is required ioread32/readl do the swap internally (eg see ppc).

Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

/Jarkko

> Signed-off-by: Jason Gunthorpe <jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
> Tested-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> ---
>  drivers/char/tpm/tpm_crb.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> index 8dd70696ebe8..0237006dc4d8 100644
> --- a/drivers/char/tpm/tpm_crb.c
> +++ b/drivers/char/tpm/tpm_crb.c
> @@ -89,7 +89,7 @@ static u8 crb_status(struct tpm_chip *chip)
>  	struct crb_priv *priv = chip->vendor.priv;
>  	u8 sts = 0;
>  
> -	if ((le32_to_cpu(ioread32(&priv->cca->start)) & CRB_START_INVOKE) !=
> +	if ((ioread32(&priv->cca->start) & CRB_START_INVOKE) !=
>  	    CRB_START_INVOKE)
>  		sts |= CRB_STS_COMPLETE;
>  
> @@ -105,7 +105,7 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf, size_t count)
>  	if (count < 6)
>  		return -EIO;
>  
> -	if (le32_to_cpu(ioread32(&priv->cca->sts)) & CRB_CA_STS_ERROR)
> +	if (ioread32(&priv->cca->sts) & CRB_CA_STS_ERROR)
>  		return -EIO;
>  
>  	memcpy_fromio(buf, priv->rsp, 6);
> @@ -141,11 +141,11 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
>  	struct crb_priv *priv = chip->vendor.priv;
>  	int rc = 0;
>  
> -	if (len > le32_to_cpu(ioread32(&priv->cca->cmd_size))) {
> +	if (len > ioread32(&priv->cca->cmd_size)) {
>  		dev_err(&chip->dev,
>  			"invalid command count value %x %zx\n",
>  			(unsigned int) len,
> -			(size_t) le32_to_cpu(ioread32(&priv->cca->cmd_size)));
> +			(size_t) ioread32(&priv->cca->cmd_size));
>  		return -E2BIG;
>  	}
>  
> @@ -181,7 +181,7 @@ static void crb_cancel(struct tpm_chip *chip)
>  static bool crb_req_canceled(struct tpm_chip *chip, u8 status)
>  {
>  	struct crb_priv *priv = chip->vendor.priv;
> -	u32 cancel = le32_to_cpu(ioread32(&priv->cca->cancel));
> +	u32 cancel = ioread32(&priv->cca->cancel);
>  
>  	return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;
>  }
> @@ -251,10 +251,10 @@ static int crb_acpi_add(struct acpi_device *device)
>  		return -ENOMEM;
>  	}
>  
> -	pa = ((u64) le32_to_cpu(ioread32(&priv->cca->cmd_pa_high)) << 32) |
> -		(u64) le32_to_cpu(ioread32(&priv->cca->cmd_pa_low));
> -	priv->cmd = devm_ioremap_nocache(dev, pa,
> -					 ioread32(&priv->cca->cmd_size));
> +	pa = ((u64)ioread32(&priv->cca->cmd_pa_high) << 32) |
> +	     (u64)ioread32(&priv->cca->cmd_pa_low);
> +	priv->cmd =
> +	    devm_ioremap_nocache(dev, pa, ioread32(&priv->cca->cmd_size));
>  	if (!priv->cmd) {
>  		dev_err(dev, "ioremap of the command buffer failed\n");
>  		return -ENOMEM;
> @@ -262,8 +262,8 @@ static int crb_acpi_add(struct acpi_device *device)
>  
>  	memcpy_fromio(&pa, &priv->cca->rsp_pa, 8);
>  	pa = le64_to_cpu(pa);
> -	priv->rsp = devm_ioremap_nocache(dev, pa,
> -					 ioread32(&priv->cca->rsp_size));
> +	priv->rsp =
> +	    devm_ioremap_nocache(dev, pa, ioread32(&priv->cca->rsp_size));
>  	if (!priv->rsp) {
>  		dev_err(dev, "ioremap of the response buffer failed\n");
>  		return -ENOMEM;
> -- 
> 2.1.4
> 

------------------------------------------------------------------------------

  parent reply	other threads:[~2016-01-03 17:28 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1450376600-6970-1-git-send-email-jgunthorpe@obsidianresearch.com>
     [not found] ` <1450376600-6970-4-git-send-email-jgunthorpe@obsidianresearch.com>
     [not found]   ` <1450376600-6970-4-git-send-email-jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-12-18  9:34     ` [PATCH v3 3/7] tpm_tis: Do not fall back to a hardcoded address for TPM2 Jarkko Sakkinen
2015-12-18 16:51       ` Jason Gunthorpe
     [not found]         ` <20151218165127.GC7354-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2015-12-20 12:34           ` Jarkko Sakkinen
     [not found] ` <1450376600-6970-2-git-send-email-jgunthorpe@obsidianresearch.com>
     [not found]   ` <1450376600-6970-2-git-send-email-jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-01-03 17:09     ` [PATCH v3 1/7] tpm_crb: Use the common ACPI definition of struct acpi_tpm2 Jarkko Sakkinen
     [not found]       ` <20160103170906.GA4155-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-01-04 18:23         ` Jason Gunthorpe
     [not found]           ` <20160104182317.GB20016-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-01-04 18:49             ` Jarkko Sakkinen
     [not found] ` <1450376600-6970-3-git-send-email-jgunthorpe@obsidianresearch.com>
     [not found]   ` <1450376600-6970-3-git-send-email-jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-01-03 17:20     ` [PATCH v3 2/7] tpm_tis: Disable interrupt auto probing on a per-device basis Jarkko Sakkinen
     [not found]       ` <20160103172040.GB4155-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-01-04 18:24         ` Jason Gunthorpe
     [not found]           ` <20160104182442.GC20016-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-01-04 18:32             ` Jarkko Sakkinen
     [not found] ` <1450376600-6970-5-git-send-email-jgunthorpe@obsidianresearch.com>
     [not found]   ` <1450376600-6970-5-git-send-email-jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-01-03 17:23     ` [PATCH v3 4/7] tpm_tis: Use devm_ioremap_resource Jarkko Sakkinen
     [not found] ` <1450376600-6970-6-git-send-email-jgunthorpe@obsidianresearch.com>
2016-01-03 17:26   ` [PATCH v3 5/7] tpm_tis: Clean up the force=1 module parameter Jarkko Sakkinen
2016-01-04 18:27     ` Jason Gunthorpe
     [not found] ` <1450376600-6970-7-git-send-email-jgunthorpe@obsidianresearch.com>
     [not found]   ` <1450376600-6970-7-git-send-email-jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-01-03 17:28     ` Jarkko Sakkinen [this message]
     [not found] ` <1450376600-6970-8-git-send-email-jgunthorpe@obsidianresearch.com>
     [not found]   ` <1450376600-6970-8-git-send-email-jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-01-03 17:32     ` [PATCH v3 7/7] tpm_crb: Use devm_ioremap_resource Jarkko Sakkinen
     [not found]       ` <20160103173213.GF4155-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-01-04 18:30         ` Jason Gunthorpe
2016-01-04 19:43           ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160103172801.GE4155@intel.com \
    --to=jarkko.sakkinen-vuqaysv1563yd54fqh9/ca@public.gmane.org \
    --cc=Martin.Wilck-RJz4owOZxyXQFUHtdCDX3A@public.gmane.org \
    --cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox