* [U-Boot-Users] help about u-boot on lubbock
@ 2003-04-08 22:46 Zhao Hongda
0 siblings, 0 replies; only message in thread
From: Zhao Hongda @ 2003-04-08 22:46 UTC (permalink / raw)
To: u-boot
I have just checkouted the u-boot source code from CVS, and:
(use arm-linux-gcc 2.95.3)
make lubbock_config
make
then I use JFlash(windows) to install u-boot.bin in my lubbock(pxa250)
board,
and I use the HyperTerminal as the console tools for inter-action.
after power on, I can get the prompt, but if I try to copy RAM data to Flash
like:
cp 0xa0008000 0x04000000 1024
u-boot complain that flash not erased, but even I use
erase bank 2
to erase the whole bank flash, when I use
md 0x04000000
to see the value in flash bank 2, I found that the value is same as old,
How can I solve this problem, please help me.
Thanks.
Hongda Zhao
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-04-08 22:46 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-04-08 22:46 [U-Boot-Users] help about u-boot on lubbock Zhao Hongda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox