RE: [PATCH v3 1/4] clk: imx: add i.MX6UL clk driver

[Christoph Niedermaier <cniedermaier@dh-electronics.com>]

Hello,

> From: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
> Sent: Friday, May 30, 2025 5:12 PM
> Subject: Re: [PATCH v3 1/4] clk: imx: add i.MX6UL clk driver
> 
> [...]
> 
>>> I have only an imx6ull for testing. At the moment it looks good, although
>>> the Ethernet on my device is not yet working with this clock driver. I need
>>> to find out why it's not working and will probably do a follow up patch.
>>>
>>> With that changes above
>>> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
>>>
>> 
>> I will add you review and tested-by: during respin. For the ethernet I
>> can take a look
>> but I have not in my module
> 
> Not necessary, with the imx6ulz this makes no sense. I'll have a look
> at it. I will use your patch v4 as the base for my adjustments.
> 
> I have another upstream on going so I should able to test. Anyway I hope that this is the last respin.

I can't say when Ethernet will work on my device. But from my point
of view, the current status of your patch can already be applied.
 
> Do you test the nand?

No, unfortunately I have eMMC on my imx6ull.


Regards
Christoph