[U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

* [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs
@ 2010-06-23 16:04 Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 1/6] Allow PHY addresses on kirkwood egiga to be non continuous Tor Krill
                   ` (5 more replies)
  0 siblings, 6 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-23 16:04 UTC (permalink / raw)
  To: u-boot

Today the kirkwood egiga driver assumes that phy addresses are 
consecutive from a base address.

Our new board design using this cpu unfortunately has a non contiguous
addressing of its phys and thus doesn't work with the current
implementation.

This patchset updates the implementation to use an array of
phy addresses as configuration.

Tor Krill (6):
  Allow PHY addresses on kirkwood egiga to be non continuous.
  Convert Suen3 board to use array of phy addrs
  Convert Sheevaplug board to use array of phy addrs
  Convert OpenRD board to use array of phy addrs
  Convert Guruplug board to use array of phy addrs
  Convert rd6281a board to use array of phy addrs

 board/keymile/km_arm/km_arm.c |    3 ++-
 drivers/net/kirkwood_egiga.c  |    3 ++-
 drivers/net/kirkwood_egiga.h  |    8 ++++----
 include/configs/guruplug.h    |    2 +-
 include/configs/km_arm.h      |    2 +-
 include/configs/openrd_base.h |    2 +-
 include/configs/rd6281a.h     |    2 +-
 include/configs/sheevaplug.h  |    2 +-
 8 files changed, 13 insertions(+), 11 deletions(-)

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 1/6] Allow PHY addresses on kirkwood egiga to be non continuous.
  2010-06-23 16:04 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs Tor Krill
@ 2010-06-23 16:04 ` Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 2/6] Convert Suen3 board to use array of phy addrs Tor Krill
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-23 16:04 UTC (permalink / raw)
  To: u-boot

Changing its configuration from PHY_BASE_ADR single value to use
CONFIG_PHY_ADDRS as an array with adresses.

Signed-off-by: Tor Krill <tor@excito.com>
---
 drivers/net/kirkwood_egiga.c |    3 ++-
 drivers/net/kirkwood_egiga.h |    8 ++++----
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c
index 932792e..7993e51 100644
--- a/drivers/net/kirkwood_egiga.c
+++ b/drivers/net/kirkwood_egiga.c
@@ -629,6 +629,7 @@ int kirkwood_egiga_initialize(bd_t * bis)
 	int devnum;
 	char *s;
 	u8 used_ports[MAX_KWGBE_DEVS] = CONFIG_KIRKWOOD_EGIGA_PORTS;
+	u8 port_addr[MAX_KWGBE_DEVS] = PHY_ADDRS;
 
 	for (devnum = 0; devnum < MAX_KWGBE_DEVS; devnum++) {
 		/*skip if port is configured not to use */
@@ -712,7 +713,7 @@ int kirkwood_egiga_initialize(bd_t * bis)
 		miiphy_register(dev->name, smi_reg_read, smi_reg_write);
 		/* Set phy address of the port */
 		miiphy_write(dev->name, KIRKWOOD_PHY_ADR_REQUEST,
-				KIRKWOOD_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum);
+				KIRKWOOD_PHY_ADR_REQUEST, port_addr[devnum]);
 #endif
 	}
 	return 0;
diff --git a/drivers/net/kirkwood_egiga.h b/drivers/net/kirkwood_egiga.h
index 30c773c..6ff3bb7 100644
--- a/drivers/net/kirkwood_egiga.h
+++ b/drivers/net/kirkwood_egiga.h
@@ -30,11 +30,11 @@
 
 #define MAX_KWGBE_DEVS	2	/*controller has two ports */
 
-/* PHY_BASE_ADR is board specific and can be configured */
-#if defined (CONFIG_PHY_BASE_ADR)
-#define PHY_BASE_ADR		CONFIG_PHY_BASE_ADR
+/* PHY addresses is board specific and can be configured */
+#if defined (CONFIG_PHY_ADDRS)
+#define PHY_ADDRS		CONFIG_PHY_ADDRS
 #else
-#define PHY_BASE_ADR		0x08	/* default phy base addr */
+#define PHY_ADDRS		{0x08,0x09}	/* default phy base addr */
 #endif
 
 /* Constants */
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 2/6] Convert Suen3 board to use array of phy addrs
  2010-06-23 16:04 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 1/6] Allow PHY addresses on kirkwood egiga to be non continuous Tor Krill
@ 2010-06-23 16:04 ` Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 3/6] Convert Sheevaplug " Tor Krill
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-23 16:04 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tor Krill <tor@excito.com>
---
 board/keymile/km_arm/km_arm.c |    3 ++-
 include/configs/km_arm.h      |    2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 53cf474..16da353 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -244,12 +244,13 @@ int dram_init(void)
 void reset_phy(void)
 {
 	char *name = "egiga0";
+	u8 port_addr[] = CONFIG_PHY_ADDRS;
 
 	if (miiphy_set_current_dev(name))
 		return;
 
 	/* reset the phy */
-	miiphy_reset(name, CONFIG_PHY_BASE_ADR);
+	miiphy_reset(name, port_addr[0]);
 }
 
 #if defined(CONFIG_HUSH_INIT_VAR)
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index a928c2c..1c3fa0d 100644
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -130,7 +130,7 @@
 #define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
+#define CONFIG_PHY_ADDRS	{0,1}
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init 88E1118 PHY */
 
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 3/6] Convert Sheevaplug board to use array of phy addrs
  2010-06-23 16:04 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 1/6] Allow PHY addresses on kirkwood egiga to be non continuous Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 2/6] Convert Suen3 board to use array of phy addrs Tor Krill
@ 2010-06-23 16:04 ` Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 4/6] Convert OpenRD " Tor Krill
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-23 16:04 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tor Krill <tor@excito.com>
---
 include/configs/sheevaplug.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index e9edc44..9fdfd7e 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -177,7 +177,7 @@
 #define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
+#define CONFIG_PHY_ADDRS	{0,1}
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 4/6] Convert OpenRD board to use array of phy addrs
  2010-06-23 16:04 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs Tor Krill
                   ` (2 preceding siblings ...)
  2010-06-23 16:04 ` [U-Boot] [PATCH 3/6] Convert Sheevaplug " Tor Krill
@ 2010-06-23 16:04 ` Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 5/6] Convert Guruplug " Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 6/6] Convert rd6281a " Tor Krill
  5 siblings, 0 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-23 16:04 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tor Krill <tor@excito.com>
---
 include/configs/openrd_base.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h
index d2f4502..37574ac 100644
--- a/include/configs/openrd_base.h
+++ b/include/configs/openrd_base.h
@@ -186,7 +186,7 @@
 #define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0x8
+#define CONFIG_PHY_ADDRS	{0x8,0x9}
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 5/6] Convert Guruplug board to use array of phy addrs
  2010-06-23 16:04 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs Tor Krill
                   ` (3 preceding siblings ...)
  2010-06-23 16:04 ` [U-Boot] [PATCH 4/6] Convert OpenRD " Tor Krill
@ 2010-06-23 16:04 ` Tor Krill
  2010-06-23 16:04 ` [U-Boot] [PATCH 6/6] Convert rd6281a " Tor Krill
  5 siblings, 0 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-23 16:04 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tor Krill <tor@excito.com>
---
 include/configs/guruplug.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index 2fbc6ad..028eee7 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -175,7 +175,7 @@
 #define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,1}	/* enable both ports */
-#define CONFIG_PHY_BASE_ADR	0
+#define CONFIG_PHY_ADDRS	{0,1}
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv88e1121 PHY */
 #endif /* CONFIG_CMD_NET */
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 6/6] Convert rd6281a board to use array of phy addrs
  2010-06-23 16:04 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs Tor Krill
                   ` (4 preceding siblings ...)
  2010-06-23 16:04 ` [U-Boot] [PATCH 5/6] Convert Guruplug " Tor Krill
@ 2010-06-23 16:04 ` Tor Krill
  5 siblings, 0 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-23 16:04 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tor Krill <tor@excito.com>
---
 include/configs/rd6281a.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h
index 3d8e25c..01550d1 100644
--- a/include/configs/rd6281a.h
+++ b/include/configs/rd6281a.h
@@ -176,7 +176,7 @@
 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
 #define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */
 #define CONFIG_PHY_SPEED	_1000BASET	/*Force PHYspeed to 1GBPs */
-#define CONFIG_PHY_BASE_ADR	0x0A
+#define CONFIG_PHY_ADDRS	{0x0A,0x0B}
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init switch and PHY */
 #define CONFIG_MV88E61XX_SWITCH	/* Enable MV88E61XX switch driver */
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs
@ 2010-06-24  7:55 Tor Krill
  2010-06-24  7:55 ` [U-Boot] [PATCH 3/6] Convert Sheevaplug board to use array of " Tor Krill
  0 siblings, 1 reply; 9+ messages in thread
From: Tor Krill @ 2010-06-24  7:55 UTC (permalink / raw)
  To: u-boot

Today the kirkwood egiga driver assumes that phy addresses are 
consecutive from a base address.

Our new board design using this cpu unfortunately has a non contiguous
addressing of its phys and thus doesn't work with the current
implementation.

This patchset updates the implementation to use an array of
phy addresses as configuration.

Tor Krill (6):
  Allow PHY addresses on kirkwood egiga to be non continuous.
  Convert Suen3 board to use array of phy addrs
  Convert Sheevaplug board to use array of phy addrs
  Convert OpenRD board to use array of phy addrs
  Convert Guruplug board to use array of phy addrs
  Convert rd6281a board to use array of phy addrs

 board/keymile/km_arm/km_arm.c |    3 ++-
 drivers/net/kirkwood_egiga.c  |    3 ++-
 drivers/net/kirkwood_egiga.h  |    8 ++++----
 include/configs/guruplug.h    |    2 +-
 include/configs/km_arm.h      |    2 +-
 include/configs/openrd_base.h |    2 +-
 include/configs/rd6281a.h     |    2 +-
 include/configs/sheevaplug.h  |    2 +-
 8 files changed, 13 insertions(+), 11 deletions(-)

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 3/6] Convert Sheevaplug board to use array of phy addrs
  2010-06-24  7:55 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic " Tor Krill
@ 2010-06-24  7:55 ` Tor Krill
  0 siblings, 0 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-24  7:55 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tor Krill <tor@excito.com>
---
 include/configs/sheevaplug.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index e9edc44..9fdfd7e 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -177,7 +177,7 @@
 #define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
+#define CONFIG_PHY_ADDRS	{0,1}
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs
@ 2010-06-24  9:00 Tor Krill
  2010-06-24  9:00 ` [U-Boot] [PATCH 3/6] Convert Sheevaplug board to use array of " Tor Krill
  0 siblings, 1 reply; 9+ messages in thread
From: Tor Krill @ 2010-06-24  9:00 UTC (permalink / raw)
  To: u-boot

Today the kirkwood egiga driver assumes that phy addresses are 
consecutive from a base address.

Our new board design using this cpu unfortunately has a non contiguous
addressing of its phys and thus doesn't work with the current
implementation.

This patchset updates the implementation to use an array of
phy addresses as configuration.

Tor Krill (6):
  Allow PHY addresses on kirkwood egiga to be non continuous.
  Convert Suen3 board to use array of phy addrs
  Convert Sheevaplug board to use array of phy addrs
  Convert OpenRD board to use array of phy addrs
  Convert Guruplug board to use array of phy addrs
  Convert rd6281a board to use array of phy addrs

 board/keymile/km_arm/km_arm.c |    3 ++-
 drivers/net/kirkwood_egiga.c  |    3 ++-
 drivers/net/kirkwood_egiga.h  |    8 ++++----
 include/configs/guruplug.h    |    2 +-
 include/configs/km_arm.h      |    2 +-
 include/configs/openrd_base.h |    2 +-
 include/configs/rd6281a.h     |    2 +-
 include/configs/sheevaplug.h  |    2 +-
 8 files changed, 13 insertions(+), 11 deletions(-)

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [U-Boot] [PATCH 3/6] Convert Sheevaplug board to use array of phy addrs
  2010-06-24  9:00 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic " Tor Krill
@ 2010-06-24  9:00 ` Tor Krill
  0 siblings, 0 replies; 9+ messages in thread
From: Tor Krill @ 2010-06-24  9:00 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Tor Krill <tor@excito.com>
---
 include/configs/sheevaplug.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index e9edc44..9fdfd7e 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -177,7 +177,7 @@
 #define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
+#define CONFIG_PHY_ADDRS	{0,1}
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2010-06-24  9:00 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-23 16:04 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic phy addrs Tor Krill
2010-06-23 16:04 ` [U-Boot] [PATCH 1/6] Allow PHY addresses on kirkwood egiga to be non continuous Tor Krill
2010-06-23 16:04 ` [U-Boot] [PATCH 2/6] Convert Suen3 board to use array of phy addrs Tor Krill
2010-06-23 16:04 ` [U-Boot] [PATCH 3/6] Convert Sheevaplug " Tor Krill
2010-06-23 16:04 ` [U-Boot] [PATCH 4/6] Convert OpenRD " Tor Krill
2010-06-23 16:04 ` [U-Boot] [PATCH 5/6] Convert Guruplug " Tor Krill
2010-06-23 16:04 ` [U-Boot] [PATCH 6/6] Convert rd6281a " Tor Krill
  -- strict thread matches above, loose matches on Subject: below --
2010-06-24  7:55 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic " Tor Krill
2010-06-24  7:55 ` [U-Boot] [PATCH 3/6] Convert Sheevaplug board to use array of " Tor Krill
2010-06-24  9:00 [U-Boot] [PATCH 0/6] Update kirkwood egiga to allow dynamic " Tor Krill
2010-06-24  9:00 ` [U-Boot] [PATCH 3/6] Convert Sheevaplug board to use array of " Tor Krill

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox