* [U-Boot] [PATCH] ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module
@ 2010-09-22 16:39 Steve Sakoman
2010-09-22 16:44 ` Jan, Sebastien
0 siblings, 1 reply; 2+ messages in thread
From: Steve Sakoman @ 2010-09-22 16:39 UTC (permalink / raw)
To: u-boot
This patch corrects the pinmux settings to enable proper functioning
of the wifi/bluetooth module.
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
board/ti/panda/panda.h | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
index eb1f021..e3d090e 100644
--- a/board/ti/panda/panda.h
+++ b/board/ti/panda/panda.h
@@ -53,7 +53,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
{GPMC_A20, (IEN | M3)}, /* gpio_44 */
{GPMC_A21, (M3)}, /* gpio_45 */
- {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
+ {GPMC_A22, (M3)}, /* gpio_46 */
{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
{GPMC_A24, (PTD | M3)}, /* gpio_48 */
{GPMC_A25, (PTD | M3)}, /* gpio_49 */
@@ -69,9 +69,9 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
{GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
{GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
- {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
+ {GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */
{C2C_DATA11, (PTD | M3)}, /* gpio_100 */
- {C2C_DATA12, (M1)}, /* dsi1_te0 */
+ {C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101 */
{C2C_DATA13, (PTD | M3)}, /* gpio_102 */
{C2C_DATA14, (M1)}, /* dsi2_te0 */
{C2C_DATA15, (PTD | M3)}, /* gpio_104 */
@@ -189,12 +189,12 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
- {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
+ {UNIPRO_TX0, (PTD | IEN | M3)}, /* gpio_171 */
{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
- {UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_0 */
- {UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_1 */
+ {UNIPRO_TX2, (PTU | IEN | M3)}, /* gpio_0 */
+ {UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */
{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
@@ -205,7 +205,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
{FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
- {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
+ {FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
{SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
{SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
{SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
@@ -230,7 +230,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
{DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
{DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
- {DPM_EMU16, (IEN | M5)}, /* dispc2_data3 */
+ {DPM_EMU16, (M3)}, /* gpio_27 */
{DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
{DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
@@ -248,7 +248,7 @@ const struct pad_conf_entry wkup_padconf_array[] = {
{PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
{PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
{PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
{PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
{PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module
2010-09-22 16:39 [U-Boot] [PATCH] ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module Steve Sakoman
@ 2010-09-22 16:44 ` Jan, Sebastien
0 siblings, 0 replies; 2+ messages in thread
From: Jan, Sebastien @ 2010-09-22 16:44 UTC (permalink / raw)
To: u-boot
I applied this patch on top of the Ubuntu package of Linaro u-boot, and it
fixed the issue with BT chip on my pandaboard.
Thanks Steve!
Tested-by: Sebastien Jan <s-jan@ti.com>
On Wed, Sep 22, 2010 at 6:39 PM, Steve Sakoman <steve@sakoman.com> wrote:
> This patch corrects the pinmux settings to enable proper functioning
> of the wifi/bluetooth module.
>
> Signed-off-by: Steve Sakoman <steve@sakoman.com>
> ---
> board/ti/panda/panda.h | 18 +++++++++---------
> 1 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
> index eb1f021..e3d090e 100644
> --- a/board/ti/panda/panda.h
> +++ b/board/ti/panda/panda.h
> @@ -53,7 +53,7 @@ const struct pad_conf_entry core_padconf_array[] = {
> {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_row7 */
> {GPMC_A20, (IEN | M3)}, /*
> gpio_44 */
> {GPMC_A21, (M3)}, /*
> gpio_45 */
> - {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_col6 */
> + {GPMC_A22, (M3)}, /*
> gpio_46 */
> {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_col7 */
> {GPMC_A24, (PTD | M3)}, /*
> gpio_48 */
> {GPMC_A25, (PTD | M3)}, /*
> gpio_49 */
> @@ -69,9 +69,9 @@ const struct pad_conf_entry core_padconf_array[] = {
> {GPMC_NBE0_CLE, (M3)}, /*
> gpio_59 */
> {GPMC_NBE1, (PTD | M3)}, /*
> gpio_60 */
> {GPMC_WAIT0, (PTU | IEN | M3)}, /*
> gpio_61 */
> - {GPMC_WAIT1, (IEN | M3)}, /*
> gpio_62 */
> + {GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /*
> gpio_62 */
> {C2C_DATA11, (PTD | M3)}, /*
> gpio_100 */
> - {C2C_DATA12, (M1)}, /*
> dsi1_te0 */
> + {C2C_DATA12, (PTU | IEN | M3)}, /*
> gpio_101 */
> {C2C_DATA13, (PTD | M3)}, /*
> gpio_102 */
> {C2C_DATA14, (M1)}, /*
> dsi2_te0 */
> {C2C_DATA15, (PTD | M3)}, /*
> gpio_104 */
> @@ -189,12 +189,12 @@ const struct pad_conf_entry core_padconf_array[] = {
> {USBB2_ULPITLL_DAT7, (IEN | M5)}, /*
> dispc2_data11 */
> {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /*
> gpio_169 */
> {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /*
> gpio_170 */
> - {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_col0 */
> + {UNIPRO_TX0, (PTD | IEN | M3)}, /*
> gpio_171 */
> {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_col1 */
> {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_col2 */
> {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_col3 */
> - {UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
> gpio_0 */
> - {UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
> gpio_1 */
> + {UNIPRO_TX2, (PTU | IEN | M3)}, /*
> gpio_0 */
> + {UNIPRO_TY2, (PTU | IEN | M3)}, /*
> gpio_1 */
> {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_row0 */
> {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_row1 */
> {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /*
> kpd_row2 */
> @@ -205,7 +205,7 @@ const struct pad_conf_entry core_padconf_array[] = {
> {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /*
> usba0_otg_dp */
> {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /*
> usba0_otg_dm */
> {FREF_CLK1_OUT, (M0)}, /*
> fref_clk1_out */
> - {FREF_CLK2_OUT, (M0)}, /*
> fref_clk2_out */
> + {FREF_CLK2_OUT, (PTU | IEN | M3)}, /*
> gpio_182 */
> {SYS_NIRQ1, (PTU | IEN | M0)}, /*
> sys_nirq1 */
> {SYS_NIRQ2, (PTU | IEN | M0)}, /*
> sys_nirq2 */
> {SYS_BOOT0, (PTU | IEN | M3)}, /*
> gpio_184 */
> @@ -230,7 +230,7 @@ const struct pad_conf_entry core_padconf_array[] = {
> {DPM_EMU13, (IEN | M5)}, /*
> dispc2_data6 */
> {DPM_EMU14, (IEN | M5)}, /*
> dispc2_data5 */
> {DPM_EMU15, (IEN | M5)}, /*
> dispc2_data4 */
> - {DPM_EMU16, (IEN | M5)}, /*
> dispc2_data3 */
> + {DPM_EMU16, (M3)}, /*
> gpio_27 */
> {DPM_EMU17, (IEN | M5)}, /*
> dispc2_data2 */
> {DPM_EMU18, (IEN | M5)}, /*
> dispc2_data1 */
> {DPM_EMU19, (IEN | M5)}, /*
> dispc2_data0 */
> @@ -248,7 +248,7 @@ const struct pad_conf_entry wkup_padconf_array[] = {
> {PAD0_FREF_SLICER_IN, (M0)}, /*
> fref_slicer_in */
> {PAD1_FREF_CLK_IOREQ, (M0)}, /*
> fref_clk_ioreq */
> {PAD0_FREF_CLK0_OUT, (M2)}, /*
> sys_drm_msecure */
> - {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /*
> # */
> + {PAD1_FREF_CLK3_REQ, (M3)}, /*
> gpio_wk30 */
> {PAD0_FREF_CLK3_OUT, (M0)}, /*
> fref_clk3_out */
> {PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /*
> led status_1 */
> {PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /*
> led status_2 */
> --
> 1.7.0.4
>
>
>
>
>
--
Texas Instruments France SA, 821 Avenue Jack Kilby, 06270 Villeneuve Loubet.
036 420 040 R.C.S Antibes. Capital de EUR 753.920
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-09-22 16:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-09-22 16:39 [U-Boot] [PATCH] ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module Steve Sakoman
2010-09-22 16:44 ` Jan, Sebastien
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox