From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 14/29] ARM: SPL: Move gpmc_init() to spl_board_init()
Date: Mon, 24 Sep 2012 17:30:52 -0700 [thread overview]
Message-ID: <1348533068-13038-15-git-send-email-trini@ti.com> (raw)
In-Reply-To: <1348533068-13038-1-git-send-email-trini@ti.com>
This is an OMAP/related-specific function, move calling it to
spl_board_init() and turn on CONFIG_SPL_BOARD_INIT on the boards that
enabled NAND and didn't enable this already.
Signed-off-by: Tom Rini <trini@ti.com>
---
arch/arm/cpu/armv7/omap-common/boot-common.c | 7 +++++++
arch/arm/cpu/armv7/omap-common/spl_nand.c | 1 -
arch/arm/cpu/armv7/omap3/board.c | 3 +++
include/configs/am3517_crane.h | 1 +
include/configs/am3517_evm.h | 1 +
include/configs/mcx.h | 1 +
include/configs/tam3517-common.h | 1 +
7 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 3406cfb..ed398fd 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -49,6 +49,13 @@ u32 spl_boot_mode(void)
return omap_bootmode;
}
+void spl_board_init(void)
+{
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ gpmc_init();
+#endif
+}
+
int board_mmc_init(bd_t *bis)
{
switch (spl_boot_device()) {
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
index 3e2f359..1e6b5f0 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_nand.c
@@ -35,7 +35,6 @@ void spl_nand_load_image(void)
int *dst __attribute__((unused));
debug("spl: nand - using hw ecc\n");
- gpmc_init();
nand_init();
/*use CONFIG_SYS_TEXT_BASE as temporary storage area */
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 3d74f09..52196c8 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -106,6 +106,9 @@ int board_mmc_init(bd_t *bis)
void spl_board_init(void)
{
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ gpmc_init();
+#endif
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index f24b44d..254ed57 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -314,6 +314,7 @@
/* Defines for SPL */
#define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 95f8d78..ca39c72 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -313,6 +313,7 @@
/* Defines for SPL */
#define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 733022e..a841c70 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -359,6 +359,7 @@
/* Defines for SPL */
#define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_NAND_SOFTECC
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index a13fd93..b34cb78 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -239,6 +239,7 @@
/* Defines for SPL */
#define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_CONSOLE
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_NAND_SOFTECC
--
1.7.9.5
next prev parent reply other threads:[~2012-09-25 0:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-25 0:30 [U-Boot] [PATCH v7 0/29] ARM: SPL: Make more generic, merge DaVinci and OMAP Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 01/29] Makefile: Move SPL files to clobber, remove from clean Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 02/29] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 03/29] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print() Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 04/29] omap-common: Fix typo in save_boot_params() in lowlevel_init.S Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 05/29] omap-common: SPL: Fix whitespace in omap-common/u-boot-spl.lds Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 06/29] ARM: SPL: Rename omap_boot_device to spl_boot_device Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 07/29] ARM: SPL: Rename omap_boot_mode to spl_boot_mode() Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 08/29] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 09/29] ARM: SPL: Only call mem_malloc_init if configured Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 10/29] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 11/29] ARM: SPL: Make spl_mmc.c more generic Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 12/29] ARM: SPL: Clean up spl.c / spl_nand.c slightly Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 13/29] ARM: SPL: Start hooking in the current SPI SPL support Tom Rini
2012-09-25 0:30 ` Tom Rini [this message]
2012-09-25 0:30 ` [U-Boot] [PATCH v7 15/29] SPL: Move the omap SPL framework to common/spl Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 16/29] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 17/29] SPL: do not use fix value for u-boot size Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 18/29] SPL: Use image_get_xxx() functions to access header values Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 19/29] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 20/29] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK Tom Rini
2012-09-27 18:20 ` Tom Rini
2012-09-25 0:30 ` [U-Boot] [PATCH v7 21/29] hawkboard: Update config file to work with common spl framework Tom Rini
2012-09-25 0:31 ` [U-Boot] [PATCH v7 22/29] da850: Add README.da850 Tom Rini
2012-09-25 0:31 ` [U-Boot] [PATCH v7 23/29] SPL: Add NOR flash booting support Tom Rini
2012-09-25 0:31 ` [U-Boot] [PATCH v7 24/29] SPL: Add option to skip copying of the mkimage header Tom Rini
2012-09-25 0:31 ` [U-Boot] [PATCH v7 25/29] SPL: SPI: Enhance spi_spl_load to match the other load functions Tom Rini
2012-09-25 0:31 ` [U-Boot] [PATCH v7 26/29] SPL: Enable use of custom defined U-Boot entry point Tom Rini
2012-09-25 0:31 ` [U-Boot] [PATCH v7 27/29] SPL: Make un-supported boot device puts a debug instead Tom Rini
2012-09-25 0:31 ` [U-Boot] [PATCH v7 28/29] SPL: Rework how we inform about un-headered images Tom Rini
2012-09-25 0:31 ` [U-Boot] [PATCH v7 29/29] SPL: Add support for loading image from ram in SPL Tom Rini
2012-09-27 20:04 ` [U-Boot] [PATCH v7 0/29] ARM: SPL: Make more generic, merge DaVinci and OMAP Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348533068-13038-15-git-send-email-trini@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox