[U-Boot] [PATCH v2 2/7] usb: ehci: generic PCI support

[Simon Glass <sjg@chromium.org>]

From: Vincent Palatin <vpalatin@chromium.org>

Instead of hardcoding the PCI IDs on the USB controller, use the PCI
class to detect them.

Ensure the busmaster bit is properly set in the PCI configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>
---
Changes in v2:
- Use errno where possible
- Use PCI_CLASS_SERIAL_USB_EHCI instead of the number

 drivers/usb/host/ehci-pci.c |   41 ++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 40 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 29af02d..8064a32 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -19,6 +19,7 @@
  */
 
 #include <common.h>
+#include <errno.h>
 #include <pci.h>
 #include <usb.h>
 
@@ -32,6 +33,35 @@ static struct pci_device_id ehci_pci_ids[] = {
 	{0x12D8, 0x400F},	/* Pericom */
 	{0, 0}
 };
+#else
+static pci_dev_t ehci_find_class(void)
+{
+	int bus;
+	int devnum;
+	pci_dev_t bdf;
+	uint32_t class;
+
+	for (bus = 0; bus < pci_last_busno(); bus++) {
+		for (devnum = 0; devnum < PCI_MAX_PCI_DEVICES-1; devnum++) {
+			pci_read_config_dword(PCI_BDF(bus, devnum, 0),
+					      PCI_CLASS_REVISION, &class);
+			if (class >> 16 == 0xffff)
+				continue;
+
+			for (bdf = PCI_BDF(bus, devnum, 0);
+					bdf <= PCI_BDF(bus, devnum,
+						PCI_MAX_PCI_FUNCTIONS - 1);
+					bdf += PCI_BDF(0, 0, 1)) {
+				pci_read_config_dword(bdf, PCI_CLASS_REVISION,
+						      &class);
+				if (class >> 8 == PCI_CLASS_SERIAL_USB_EHCI)
+					return bdf;
+			}
+		}
+	}
+
+	return -ENODEV;
+}
 #endif
 
 /*
@@ -41,9 +71,14 @@ static struct pci_device_id ehci_pci_ids[] = {
 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
 	pci_dev_t pdev;
+	uint32_t cmd;
 
+#ifdef CONFIG_PCI_EHCI_DEVICE
 	pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
-	if (pdev == -1) {
+#else
+	pdev = ehci_find_class();
+#endif
+	if (pdev < 0) {
 		printf("EHCI host controller not found\n");
 		return -1;
 	}
@@ -57,6 +92,10 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 			(uint32_t)*hccr, (uint32_t)*hcor,
 			(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
 
+	/* enable busmaster */
+	pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MASTER;
+	pci_write_config_dword(pdev, PCI_COMMAND, cmd);
 	return 0;
 }
 
-- 
1.7.7.3