From: Dennis Gilmore <dennis@ausil.us>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] port beaglebones to use generic distro configs
Date: Thu, 5 Dec 2013 20:18:15 -0600 [thread overview]
Message-ID: <1386296295-28658-6-git-send-email-dennis@ausil.us> (raw)
In-Reply-To: <1386296295-28658-1-git-send-email-dennis@ausil.us>
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
include/configs/am335x_evm.h | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index d75df92..86623b1 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -56,11 +56,14 @@
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x80200000\0" \
- "fdtaddr=0x80F80000\0" \
+ "loadaddr=0x81000000\0" \
+ "pxefile_addr_r=0x81300000\0" \
+ "kernel_addr_r=0x81400000\0" \
+ "ramdisk_addr_r=0x83400000\0" \
+ "fdt_addr_r=0x81100000\0" \
+ "fdt_addr=0x81200000\0" \
"fdt_high=0xffffffff\0" \
"boot_fdt=try\0" \
- "rdaddr=0x81000000\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
@@ -76,7 +79,7 @@
"nfsopts=nolock\0" \
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
"::off\0" \
- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
+ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${ramdisk_addr_r},64M\0" \
"ramrootfstype=ext2\0" \
"mmcargs=setenv bootargs console=${console} " \
"${optargs} " \
@@ -105,13 +108,13 @@
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ "loadramdisk=load mmc ${mmcdev} ${ramdisk_addr_r} ramdisk.gz\0" \
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "loadfdt=load mmc ${bootpart} ${fdt_addr_r} ${bootdir}/${fdtfile}\0" \
"mmcloados=run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
+ "bootz ${loadaddr} - ${fdt_addr_r}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
@@ -146,12 +149,12 @@
"setenv autoload no; " \
"dhcp; " \
"tftp ${loadaddr} ${bootfile}; " \
- "tftp ${fdtaddr} ${fdtfile}; " \
+ "tftp ${fdt_addr_r} ${fdtfile}; " \
"run netargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "bootz ${loadaddr} - ${fdt_addr_r}\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+ "bootz ${loadaddr} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
"findfdt="\
"if test $board_name = A335BONE; then " \
"setenv fdtfile am335x-bone.dtb; fi; " \
--
1.8.4.2
next prev parent reply other threads:[~2013-12-06 2:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-06 2:18 [U-Boot] [RFC] implementation of generic distro configs Dennis Gilmore
2013-12-06 2:18 ` [U-Boot] [PATCH 1/5] add a generic set of configs to enable Distros to more easier support u-boot based systems Dennis Gilmore
2013-12-06 10:53 ` Wolfgang Denk
2013-12-06 2:18 ` [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs Dennis Gilmore
2013-12-06 3:47 ` Robert Nelson
2013-12-06 5:01 ` Dennis Gilmore
2013-12-06 5:06 ` Dennis Gilmore
2013-12-06 5:13 ` Robert Nelson
2013-12-06 5:07 ` Robert Nelson
2013-12-06 10:59 ` Wolfgang Denk
2013-12-06 14:48 ` Dennis Gilmore
2013-12-06 15:26 ` Wolfgang Denk
2013-12-06 16:28 ` Tom Rini
2013-12-06 20:37 ` Wolfgang Denk
2013-12-06 22:13 ` Tom Rini
2013-12-06 22:59 ` Wolfgang Denk
2013-12-06 22:44 ` Dennis Gilmore
2013-12-06 23:16 ` Wolfgang Denk
2013-12-07 0:09 ` Dennis Gilmore
2013-12-07 12:20 ` Wolfgang Denk
2013-12-06 2:18 ` [U-Boot] [PATCH 3/5] port omap4 based devices to use " Dennis Gilmore
2013-12-06 2:18 ` [U-Boot] [PATCH 4/5] port beagleboard " Dennis Gilmore
2013-12-06 2:18 ` Dennis Gilmore [this message]
2013-12-06 3:31 ` [U-Boot] [PATCH 5/5] port beaglebones " Dennis Gilmore
2013-12-06 17:14 ` [U-Boot] [RFC] implementation of " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386296295-28658-6-git-send-email-dennis@ausil.us \
--to=dennis@ausil.us \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox