public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs
Date: Sat, 07 Dec 2013 00:16:16 +0100	[thread overview]
Message-ID: <20131206231616.3E625380BFA@gemini.denx.de> (raw)
In-Reply-To: <20131206164420.36e5f593@adria.ausil.us>

Dear Dennis,

In message <20131206164420.36e5f593@adria.ausil.us> you wrote:
> 
> fdtaddr is highly prevalent in the configs

Yes, it appears some vendors favoured this name.  I'm temptted to add
that these very vendors often tend to define thier own ways without
caring what the community has been using before ;-)

That doesn't make it any better, though...

> those counts are in my git tree with the proposed patches applied
> that converted soem systems from fdtaddr to fdt_addr. One of the
> problems right or wrong is that u-boot is seen as not having any kind of
> standard, which is what I am trying to fix, at least for use in the
> generic distro world where we need to have an standardised
> documented interface.

Even if you feel differntly, I do appreciate your efforts.  But I'd
also like to see things done in a consistent way.  And the whole idea
of using the "_r" names was to show clearly which of the addresses are
supposed to be in system RAM (with "_r"), and which are not (without).

This parallels function names like board_init_f() ["_f" standing for
"running from [NOR] flash"] and board_init_r() ["_r" = running from
system RAM].

> greping through the doc directory of git I am unable to find any
> reference to this convention you speak of. 

Agreed. Noone wrote a document about this, yet.

> The only references i found was in README.falcon README.pxe and
> README.commands.spl based on your description it would mean falcon mode
> could not be implemented on any system not having nand.

I lost you here.  What makes you think so?

> cmd_pxe.c clearly specifies what it thinks the addresses are for

Yes, it does.  But this is confused or incorrect, misusing existing
names for other purposes.  This should be fixed.

> Which i read as fdt_addr is a system provided dtb, and fdt_addr_r is a
> user provided one. there is no mention of where exactly they come from.

Stop.  There has never been any such notion like "system provided" or
"user provided" before.  You cannot just put new meanings over
existing terms.  Actually, to me such terms don't even make much
sense.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
My play was a complete success.  The audience was a failure.

  reply	other threads:[~2013-12-06 23:16 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-06  2:18 [U-Boot] [RFC] implementation of generic distro configs Dennis Gilmore
2013-12-06  2:18 ` [U-Boot] [PATCH 1/5] add a generic set of configs to enable Distros to more easier support u-boot based systems Dennis Gilmore
2013-12-06 10:53   ` Wolfgang Denk
2013-12-06  2:18 ` [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs Dennis Gilmore
2013-12-06  3:47   ` Robert Nelson
2013-12-06  5:01     ` Dennis Gilmore
2013-12-06  5:06       ` Dennis Gilmore
2013-12-06  5:13         ` Robert Nelson
2013-12-06  5:07       ` Robert Nelson
2013-12-06 10:59   ` Wolfgang Denk
2013-12-06 14:48     ` Dennis Gilmore
2013-12-06 15:26       ` Wolfgang Denk
2013-12-06 16:28         ` Tom Rini
2013-12-06 20:37           ` Wolfgang Denk
2013-12-06 22:13             ` Tom Rini
2013-12-06 22:59               ` Wolfgang Denk
2013-12-06 22:44             ` Dennis Gilmore
2013-12-06 23:16               ` Wolfgang Denk [this message]
2013-12-07  0:09                 ` Dennis Gilmore
2013-12-07 12:20                   ` Wolfgang Denk
2013-12-06  2:18 ` [U-Boot] [PATCH 3/5] port omap4 based devices to use " Dennis Gilmore
2013-12-06  2:18 ` [U-Boot] [PATCH 4/5] port beagleboard " Dennis Gilmore
2013-12-06  2:18 ` [U-Boot] [PATCH 5/5] port beaglebones " Dennis Gilmore
2013-12-06  3:31   ` Dennis Gilmore
2013-12-06 17:14 ` [U-Boot] [RFC] implementation of " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131206231616.3E625380BFA@gemini.denx.de \
    --to=wd@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox