From: Jagan Teki <jagannadh.teki@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 09/17] SabreSD: i.MX6DL: Add initial dts support
Date: Tue, 23 May 2017 13:28:22 +0530 [thread overview]
Message-ID: <1495526310-5543-10-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1495526310-5543-1-git-send-email-jteki@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add initial devicetree support for i.MX6 DualLite Sabresd board.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
board/freescale/mx6sabresd/spl.c | 2 ++
configs/mx6sabresd_spl_defconfig | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/board/freescale/mx6sabresd/spl.c b/board/freescale/mx6sabresd/spl.c
index 63847b3..2488cb5 100644
--- a/board/freescale/mx6sabresd/spl.c
+++ b/board/freescale/mx6sabresd/spl.c
@@ -154,6 +154,8 @@ int board_fit_config_name_match(const char *name)
return 0;
else if (is_mx6dq() && !strcmp(name, "imx6q-sabresd"))
return 0;
+ else if (is_mx6sdl() && !strcmp(name, "imx6dl-sabresd"))
+ return 0;
else
return -1;
}
diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig
index ef02df1..5512d51 100644
--- a/configs/mx6sabresd_spl_defconfig
+++ b/configs/mx6sabresd_spl_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_VIDEO=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
-CONFIG_OF_LIST="imx6qp-sabresd imx6q-sabresd"
+CONFIG_OF_LIST="imx6qp-sabresd imx6q-sabresd imx6dl-sabresd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
--
1.9.1
next prev parent reply other threads:[~2017-05-23 7:58 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-23 7:58 [U-Boot] [PATCH v7 00/17] ARM: i.MX6: SabreSD: Add dts support Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 01/17] ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 02/17] ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 03/17] ARM: dts: i.MX6: Add imx6q-sabresd.dts Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 04/17] ARM: dts: i.MX6: Add imx6dl-sabresd.dts Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 05/17] ARM: dts: i.MX6: Add imx6qp.dtsi Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 06/17] ARM: dts: i.MX6: Add imx6qp-sabresd.dts Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 07/17] sabresd: i.MX6Q: Add initial dts support Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 08/17] sabresd: i.MX6QP: " Jagan Teki
2017-05-23 7:58 ` Jagan Teki [this message]
2017-05-23 7:58 ` [U-Boot] [PATCH v7 10/17] SabreSD: Move CONFIG_SYS_I2C_MXC to defconfigs Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 11/17] SabreSD: Enable CONFIG_DM_REGULATOR Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 12/17] SabreSD: Enable DM_USB Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 13/17] i.MX6: Sabre: Move CONFIG_FEC_MXC to defconfigs Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 14/17] net: fec_mxc: Add 'phy-reset-gpios' support Jagan Teki
2017-05-23 10:53 ` Fabio Estevam
2017-06-16 14:13 ` Lothar Waßmann
2017-05-23 7:58 ` [U-Boot] [PATCH v7 15/17] i.MX6: SabreSD: Enable DM_ETH Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 16/17] i.MX6: sabresd: Drop checkboard Jagan Teki
2017-05-23 7:58 ` [U-Boot] [PATCH v7 17/17] i.MX6: SabreSD: Cleanup board code Jagan Teki
2017-05-26 16:41 ` [U-Boot] [PATCH v7 00/17] ARM: i.MX6: SabreSD: Add dts support Jagan Teki
2017-05-26 16:47 ` Fabio Estevam
2017-05-26 16:49 ` Jagan Teki
2017-05-26 16:52 ` Fabio Estevam
2017-05-26 16:55 ` Jagan Teki
2017-05-26 17:04 ` Fabio Estevam
2017-05-26 17:14 ` Jagan Teki
2017-05-26 17:17 ` Fabio Estevam
2017-05-26 17:28 ` Jagan Teki
2017-05-26 17:34 ` Fabio Estevam
2017-05-26 17:45 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495526310-5543-10-git-send-email-jteki@openedev.com \
--to=jagannadh.teki@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox