public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/2] net: Add SMC911X driver to Kconfig
@ 2017-09-05 20:20 Adam Ford
  2017-09-05 20:20 ` [U-Boot] [PATCH 2/2] arm: omap3_logic: Migrate SMC911X " Adam Ford
  0 siblings, 1 reply; 2+ messages in thread
From: Adam Ford @ 2017-09-05 20:20 UTC (permalink / raw)
  To: u-boot

There are a variety of boards that need some cleanup in their
respective include/configs file, but here is a foundation
for them to begin their transisiton.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
 drivers/net/Kconfig | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5ceea44..bd2a303 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -203,6 +203,35 @@ config RTL8169
 	  This driver supports Realtek 8169 series gigabit ethernet family of
 	  PCI/PCIe chipsets/adapters.
 
+config SMC911X
+	bool "SMSC LAN911x and LAN921x controller driver"
+
+if SMC911X
+
+config SMC911X_BASE
+	hex "SMC911X Base Address"
+	default 0
+	help
+	  Define this to hold the physical address
+	  of the device (I/O space)
+
+choice
+	prompt "SMC911X bus width"
+	default SMC911X_16_BIT
+
+config SMC911X_32_BIT
+	bool "Enable 32-bit interface"
+
+config SMC911X_16_BIT
+	bool "Enable 16-bit interface"
+	help
+	  Define this if data bus is 16 bits. If your processor
+	  automatically converts one 32 bit word to two 16 bit
+	  words you may also try CONFIG_SMC911X_32_BIT.
+
+endchoice
+endif #SMC911X
+
 config SUN7I_GMAC
 	bool "Enable Allwinner GMAC Ethernet support"
 	help
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2017-09-05 20:20 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-09-05 20:20 [U-Boot] [PATCH 1/2] net: Add SMC911X driver to Kconfig Adam Ford
2017-09-05 20:20 ` [U-Boot] [PATCH 2/2] arm: omap3_logic: Migrate SMC911X " Adam Ford

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox