From: Patrice Chotard <patrice.chotard@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 13/14] configs: stm32mp15: Enable ENV_IS_SPI_FLASH
Date: Fri, 10 May 2019 18:11:30 +0200 [thread overview]
Message-ID: <1557504691-26188-14-git-send-email-patrice.chotard@st.com> (raw)
In-Reply-To: <1557504691-26188-1-git-send-email-patrice.chotard@st.com>
Add all relative flags needed by ENV_IS_IN_SPI_FLASH
Reserved a 256KB partition in NOR to save the U-Boot
environment.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
configs/stm32mp15_basic_defconfig | 1 +
configs/stm32mp15_trusted_defconfig | 1 +
include/configs/stm32mp1.h | 7 ++++++-
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index e8f170d..93066aa 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -44,6 +44,7 @@ CONFIG_CMD_UBI=y
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_EXT4=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_IS_IN_UBI=y
CONFIG_ENV_EXT4_INTERFACE="mmc"
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index 61d4467..949b56a 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -36,6 +36,7 @@ CONFIG_CMD_UBI=y
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_EXT4=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_IS_IN_UBI=y
CONFIG_ENV_EXT4_INTERFACE="mmc"
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index e9bd551..f541132 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -47,6 +47,11 @@
#define CONFIG_ENV_UBI_VOLUME_REDUND "uboot_config_r"
#endif
+#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_SECT_SIZE SZ_256K
+#define CONFIG_ENV_OFFSET 0x00280000
+#endif
+
/* ATAGs */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
@@ -119,7 +124,7 @@
#endif
#define STM32MP_MTDPARTS \
- "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),-(nor_user)\0" \
+ "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),-(nor_user)\0" \
"mtdparts_nand0=2m(fsbl),2m(ssbl),-(UBI)\0"
/*
--
1.9.1
next prev parent reply other threads:[~2019-05-10 16:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-10 16:11 [U-Boot] [PATCH 00/14] Add saveenv support for STM32MP1 Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 01/14] Prepare v2019.07-rc1 Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 02/14] stm32mp1: activate NAND and NOR support on EV1 Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 03/14] stm32mp1: support dynamic MTDPARTS Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 04/14] env: ext4: Allow overriding interface, device and partition Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 05/14] board: stm32mp1: Add env_ext4_get_dev_part() and env_ext4_get_intf() Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 06/14] env: allow ENV_IS_NOWHERE with other storage target Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 07/14] env: enable saveenv command when one CONFIG_ENV_IS_IN is activated Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 08/14] configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 09/14] stm32mp1: Add env_get_location() Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 10/14] mtd: Fix get_mtdparts() Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 11/14] stm32mp1: Move ENV_SIZE to Kconfig Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 12/14] configs: stm32mp15: Enable ENV_IS_IN_UBI Patrice Chotard
2019-05-10 16:11 ` Patrice Chotard [this message]
2019-05-10 16:11 ` [U-Boot] [PATCH 14/14] stm32mp1: Update env_get_location for NOR support Patrice Chotard
2019-05-10 16:18 ` [U-Boot] [PATCH 00/14] Add saveenv support for STM32MP1 Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1557504691-26188-14-git-send-email-patrice.chotard@st.com \
--to=patrice.chotard@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox