public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Patrice Chotard <patrice.chotard@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/14] configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags
Date: Fri, 10 May 2019 18:11:25 +0200	[thread overview]
Message-ID: <1557504691-26188-9-git-send-email-patrice.chotard@st.com> (raw)
In-Reply-To: <1557504691-26188-1-git-send-email-patrice.chotard@st.com>

From: Patrick Delaunay <patrick.delaunay@st.com>

Enable ENV_IS_IN_EXT4 and all relative flags to be able to
load/save environment in EXT4 partition.

This will allows to load/save environment on both sdcard and eMMC.
As for stm32mp15, bootfs has not the same partition number on sdcard
and on eMMC, we use "auto" key which allows to find the first
partition in device with bootable flag which is partition 4 on sdcard
and partition 2 on eMMC.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---

 configs/stm32mp15_basic_defconfig   | 5 +++++
 configs/stm32mp15_trusted_defconfig | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index f5e13dd..051c1de 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -41,6 +41,11 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_EXT4=y
+CONFIG_ENV_EXT4_INTERFACE="mmc"
+CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
+CONFIG_ENV_EXT4_FILE="/uboot.env"
 CONFIG_STM32_ADC=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index cae3324..f09f0e4 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -33,6 +33,11 @@ CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_EXT4=y
+CONFIG_ENV_EXT4_INTERFACE="mmc"
+CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
+CONFIG_ENV_EXT4_FILE="/uboot.env"
 CONFIG_STM32_ADC=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
-- 
1.9.1

  parent reply	other threads:[~2019-05-10 16:11 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-10 16:11 [U-Boot] [PATCH 00/14] Add saveenv support for STM32MP1 Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 01/14] Prepare v2019.07-rc1 Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 02/14] stm32mp1: activate NAND and NOR support on EV1 Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 03/14] stm32mp1: support dynamic MTDPARTS Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 04/14] env: ext4: Allow overriding interface, device and partition Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 05/14] board: stm32mp1: Add env_ext4_get_dev_part() and env_ext4_get_intf() Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 06/14] env: allow ENV_IS_NOWHERE with other storage target Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 07/14] env: enable saveenv command when one CONFIG_ENV_IS_IN is activated Patrice Chotard
2019-05-10 16:11 ` Patrice Chotard [this message]
2019-05-10 16:11 ` [U-Boot] [PATCH 09/14] stm32mp1: Add env_get_location() Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 10/14] mtd: Fix get_mtdparts() Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 11/14] stm32mp1: Move ENV_SIZE to Kconfig Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 12/14] configs: stm32mp15: Enable ENV_IS_IN_UBI Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 13/14] configs: stm32mp15: Enable ENV_IS_SPI_FLASH Patrice Chotard
2019-05-10 16:11 ` [U-Boot] [PATCH 14/14] stm32mp1: Update env_get_location for NOR support Patrice Chotard
2019-05-10 16:18 ` [U-Boot] [PATCH 00/14] Add saveenv support for STM32MP1 Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557504691-26188-9-git-send-email-patrice.chotard@st.com \
    --to=patrice.chotard@st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox