* [PATCH v6 0/8] Cortina Access Drivers Package 2
@ 2020-04-21 5:29 Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 1/8] mmc: ca_dw_mmc: Misc cleanup of driver Alex Nemirovsky
` (7 more replies)
0 siblings, 8 replies; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
This release adds the following drivers and
integrates support into the Cortina Access
Presidio Engineering Board:
CAxxxx SoC eMMC/SD controller
CAxxxx SoC I2C controller
CAxxxx Soc LED controller
CAxxxx SPI NAND and NOR controller
Changes in v6:
- Add I2C DT binding document
Changes in v5:
- Rebase code basis on v2020.04-rc5 which has
already incorporated CAxxxx eMMC initial baseline
- Rebase on codebase basis v2020.04-rc5 which already incorporated
initial baseline of eMMC DT information
- NAND support removed from presidio-asic board DT.
Changes in v4:
- Rename DT compatible name
- Remove uneccessary if-statement to support 8-bit buswidth
- Remove redundant error msg
- Use symbolic constants in switch statement
- Change DT compatiblity name to match change in driver's name
- Remove unused io_ds and fifo_mode fields from DT
- Utilize standard I2C macros from <i2c.h>
- Return ETIMEDOUT in funcs that can timeout
- Return i2c_xfer_init() result to caller of i2c_read() if it
fails within i2c_read() execution
- Fix misc. style guide conformance issues
- Use printf() to report i2c_xfer() runtime errors
instead of debug()
- remove unused macros
- remove cortina prefix from macros
- remove use BSS variable
- further cleanup to meet code style guidelines
- add additinal struct comments
- rename DT blink rate symbol
- rename DT blink rate symbol
Changes in v3:
- Fixup syntax issues related to checkpatch.pl cleanup
Changes in v2:
- Add I2C controller
- Add LED controller
- Add SPI NAND and NOR controller
Alex Nemirovsky (3):
board: presidio-asic: update eMMC DT informatino
board: presidio-asic: Add I2C support
board: presidio-asic: Add SPI NOR support
Arthur Li (2):
mmc: ca_dw_mmc: Misc cleanup of driver
i2c: i2c-cortina: added CAxxxx I2C support
Jway Lin (2):
led: led_cortina: Add CAxxx LED support
board: presidio: add LED support
Pengpeng Chen (1):
spi: ca_sflash: Add CAxxxx SPI Flash Controller
MAINTAINERS | 8 +
arch/arm/dts/ca-presidio-engboard.dts | 41 +-
board/cortina/presidio-asic/presidio.c | 16 +-
configs/cortina_presidio-asic-emmc_defconfig | 5 +
configs/cortina_presidio-asic-spi-nand_defconfig | 48 ++
configs/cortina_presidio-asic-spi-nor_defconfig | 59 +++
doc/device-tree-bindings/i2c/i2c-cortina.txt | 18 +
drivers/i2c/Kconfig | 7 +
drivers/i2c/Makefile | 1 +
drivers/i2c/i2c-cortina.c | 346 ++++++++++++++
drivers/i2c/i2c-cortina.h | 84 ++++
drivers/led/Kconfig | 8 +
drivers/led/Makefile | 1 +
drivers/led/led_cortina.c | 268 +++++++++++
drivers/mmc/ca_dw_mmc.c | 34 +-
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/ca_sflash.c | 576 +++++++++++++++++++++++
18 files changed, 1499 insertions(+), 30 deletions(-)
create mode 100644 configs/cortina_presidio-asic-spi-nand_defconfig
create mode 100644 configs/cortina_presidio-asic-spi-nor_defconfig
create mode 100644 doc/device-tree-bindings/i2c/i2c-cortina.txt
create mode 100644 drivers/i2c/i2c-cortina.c
create mode 100644 drivers/i2c/i2c-cortina.h
create mode 100644 drivers/led/led_cortina.c
create mode 100644 drivers/spi/ca_sflash.c
--
2.7.4
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v6 1/8] mmc: ca_dw_mmc: Misc cleanup of driver
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
@ 2020-04-21 5:29 ` Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 2/8] board: presidio-asic: update eMMC DT informatino Alex Nemirovsky
` (6 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
From: Arthur Li <arthur.li@cortina-access.com>
- Rename DT compatible name
- Remove uneccessary if-statement to support 8-bit buswidth
- Remove redundant error msg
- Use symbolic constants in switch statement
Signed-off-by: Arthur Li <arthur.li@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Peng Fan <peng.fan@nxp.com>
---
Changes in v6: None
Changes in v5:
- Rebase code basis on v2020.04-rc5 which has
already incorporated CAxxxx eMMC initial baseline
Changes in v4:
- Rename DT compatible name
- Remove uneccessary if-statement to support 8-bit buswidth
- Remove redundant error msg
- Use symbolic constants in switch statement
Changes in v3: None
Changes in v2:
- Add I2C controller
- Add LED controller
- Add SPI NAND and NOR controller
drivers/mmc/ca_dw_mmc.c | 34 ++++++++++++----------------------
1 file changed, 12 insertions(+), 22 deletions(-)
diff --git a/drivers/mmc/ca_dw_mmc.c b/drivers/mmc/ca_dw_mmc.c
index acbc850..198c41f 100644
--- a/drivers/mmc/ca_dw_mmc.c
+++ b/drivers/mmc/ca_dw_mmc.c
@@ -19,6 +19,7 @@
#define SD_CLK_SEL_200MHZ (0x2)
#define SD_CLK_SEL_100MHZ (0x1)
+#define SD_CLK_SEL_50MHZ (0x0)
#define IO_DRV_SD_DS_OFFSET (16)
#define IO_DRV_SD_DS_MASK (0xff << IO_DRV_SD_DS_OFFSET)
@@ -44,15 +45,11 @@ static void ca_dwmci_clksel(struct dwmci_host *host)
struct ca_dwmmc_priv_data *priv = host->priv;
u32 val = readl(priv->sd_dll_reg);
- if (host->bus_hz >= 200000000) {
- val &= ~SD_CLK_SEL_MASK;
+ val &= ~SD_CLK_SEL_MASK;
+ if (host->bus_hz >= 200000000)
val |= SD_CLK_SEL_200MHZ;
- } else if (host->bus_hz >= 100000000) {
- val &= ~SD_CLK_SEL_MASK;
+ else if (host->bus_hz >= 100000000)
val |= SD_CLK_SEL_100MHZ;
- } else {
- val &= ~SD_CLK_SEL_MASK;
- }
writel(val, priv->sd_dll_reg);
}
@@ -77,14 +74,14 @@ unsigned int ca_dwmci_get_mmc_clock(struct dwmci_host *host, uint freq)
u8 clk_div;
switch (sd_clk_sel) {
- case 2:
- clk_div = 1;
+ case SD_CLK_SEL_50MHZ:
+ clk_div = 4;
break;
- case 1:
+ case SD_CLK_SEL_100MHZ:
clk_div = 2;
break;
default:
- clk_div = 4;
+ clk_div = 1;
}
return SD_SCLK_MAX / clk_div / (host->div + 1);
@@ -100,9 +97,6 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev)
host->dev_index = 0;
host->buswidth = dev_read_u32_default(dev, "bus-width", 1);
- if (host->buswidth != 1 && host->buswidth != 4)
- return -EINVAL;
-
host->bus_hz = dev_read_u32_default(dev, "max-frequency", 50000000);
priv->ds = dev_read_u32_default(dev, "io_ds", 0x33);
host->fifo_mode = dev_read_bool(dev, "fifo-mode");
@@ -118,10 +112,8 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev)
return -EINVAL;
host->ioaddr = dev_read_addr_ptr(dev);
- if (host->ioaddr == (void *)FDT_ADDR_T_NONE) {
- printf("DWMMC: base address is invalid\n");
+ if (!host->ioaddr)
return -EINVAL;
- }
host->priv = priv;
@@ -140,10 +132,8 @@ static int ca_dwmmc_probe(struct udevice *dev)
memcpy(&ca_dwmci_dm_ops, &dm_dwmci_ops, sizeof(struct dm_mmc_ops));
dwmci_setup_cfg(&plat->cfg, host, host->bus_hz, MIN_FREQ);
- if (host->buswidth == 1) {
- (&plat->cfg)->host_caps &= ~MMC_MODE_8BIT;
- (&plat->cfg)->host_caps &= ~MMC_MODE_4BIT;
- }
+ if (host->buswidth == 1)
+ (&plat->cfg)->host_caps &= ~(MMC_MODE_8BIT | MMC_MODE_4BIT);
host->mmc = &plat->mmc;
host->mmc->priv = &priv->host;
@@ -164,7 +154,7 @@ static int ca_dwmmc_bind(struct udevice *dev)
}
static const struct udevice_id ca_dwmmc_ids[] = {
- { .compatible = "snps,dw-cortina" },
+ { .compatible = "cortina,ca-mmc" },
{ }
};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 2/8] board: presidio-asic: update eMMC DT informatino
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 1/8] mmc: ca_dw_mmc: Misc cleanup of driver Alex Nemirovsky
@ 2020-04-21 5:29 ` Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 3/8] i2c: i2c-cortina: added CAxxxx I2C support Alex Nemirovsky
` (5 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
Change DT compatiblity name to match change in driver's name.
Remove unused io_ds and fifo_mode fields from DT.
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Peng Fan <peng.fan@nxp.com>
---
Changes in v6: None
Changes in v5:
- Rebase on codebase basis v2020.04-rc5 which already incorporated
initial baseline of eMMC DT information
Changes in v4:
- Change DT compatiblity name to match change in driver's name
- Remove unused io_ds and fifo_mode fields from DT
Changes in v3: None
Changes in v2: None
arch/arm/dts/ca-presidio-engboard.dts | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/dts/ca-presidio-engboard.dts b/arch/arm/dts/ca-presidio-engboard.dts
index c03dacc..40c93d7 100644
--- a/arch/arm/dts/ca-presidio-engboard.dts
+++ b/arch/arm/dts/ca-presidio-engboard.dts
@@ -10,11 +10,9 @@
#size-cells = <1>;
mmc0: mmc at f4400000 {
- compatible = "snps,dw-cortina";
+ compatible = "cortina,ca-mmc";
reg = <0x0 0xf4400000 0x1000>;
bus-width = <4>;
- io_ds = <0x77>;
- fifo-mode;
sd_dll_ctrl = <0xf43200e8>;
io_drv_ctrl = <0xf432004c>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 3/8] i2c: i2c-cortina: added CAxxxx I2C support
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 1/8] mmc: ca_dw_mmc: Misc cleanup of driver Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 2/8] board: presidio-asic: update eMMC DT informatino Alex Nemirovsky
@ 2020-04-21 5:29 ` Alex Nemirovsky
2020-04-21 5:46 ` Heiko Schocher
2020-04-21 5:29 ` [PATCH v6 4/8] board: presidio-asic: Add " Alex Nemirovsky
` (4 subsequent siblings)
7 siblings, 1 reply; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
From: Arthur Li <arthur.li@cortina-access.com>
Add I2C controller support for Cortina Access CAxxxx SoCs
Signed-off-by: Arthur Li <arthur.li@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Heiko Schocher <hs@denx.de>
CA_I2C: DT binding for I2C controller
DT binding document for Cortina I2C driver
---
Changes in v6:
- Add I2C DT binding document
Changes in v5: None
Changes in v4:
- Utilize standard I2C macros from <i2c.h>
- Return ETIMEDOUT in funcs that can timeout
- Return i2c_xfer_init() result to caller of i2c_read() if it
fails within i2c_read() execution
- Fix misc. style guide conformance issues
- Use printf() to report i2c_xfer() runtime errors
instead of debug()
Changes in v3: None
Changes in v2: None
MAINTAINERS | 4 +
doc/device-tree-bindings/i2c/i2c-cortina.txt | 18 ++
drivers/i2c/Kconfig | 7 +
drivers/i2c/Makefile | 1 +
drivers/i2c/i2c-cortina.c | 346 +++++++++++++++++++++++++++
drivers/i2c/i2c-cortina.h | 84 +++++++
6 files changed, 460 insertions(+)
create mode 100644 doc/device-tree-bindings/i2c/i2c-cortina.txt
create mode 100644 drivers/i2c/i2c-cortina.c
create mode 100644 drivers/i2c/i2c-cortina.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 0ee358b..307e620 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -181,6 +181,8 @@ F: drivers/gpio/cortina_gpio.c
F: drivers/watchdog/cortina_wdt.c
F: drivers/serial/serial_cortina.c
F: drivers/mmc/ca_dw_mmc.c
+F: drivers/i2c/i2c-cortina.c
+F: drivers/i2c/i2c-cortina.h
ARM/CZ.NIC TURRIS MOX SUPPORT
M: Marek Behun <marek.behun@nic.cz>
@@ -720,6 +722,8 @@ F: drivers/gpio/cortina_gpio.c
F: drivers/watchdog/cortina_wdt.c
F: drivers/serial/serial_cortina.c
F: drivers/mmc/ca_dw_mmc.c
+F: drivers/i2c/i2c-cortina.c
+F: drivers/i2c/i2c-cortina.h
MIPS MSCC
M: Gregory CLEMENT <gregory.clement@bootlin.com>
diff --git a/doc/device-tree-bindings/i2c/i2c-cortina.txt b/doc/device-tree-bindings/i2c/i2c-cortina.txt
new file mode 100644
index 0000000..59d5235
--- /dev/null
+++ b/doc/device-tree-bindings/i2c/i2c-cortina.txt
@@ -0,0 +1,18 @@
+* I2C for Cortina platforms
+
+Required properties :
+- compatible : Must be "cortina,ca-i2c"
+- reg : Offset and length of the register set for the device
+
+Recommended properties :
+- clock-frequency : desired I2C bus clock frequency in Hz. If not specified,
+ default value is 100000. Possible values are 100000,
+ 400000 and 1000000.
+
+Examples :
+
+ i2c: i2c at f4329120 {
+ compatible = "cortina,ca-i2c";
+ reg = <0x0 0xf4329120 0x28>;
+ clock-frequency = <400000>;
+ };
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 03d2fed..b98a4aa 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -85,6 +85,13 @@ config SYS_I2C_CADENCE
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
+config SYS_I2C_CA
+ tristate "Cortina-Access I2C Controller"
+ depends on DM_I2C && CORTINA_PLATFORM
+ default n
+ help
+ Say yes here to select Cortina-Access I2C Host Controller.
+
config SYS_I2C_DAVINCI
bool "Davinci I2C Controller"
depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index f5a471f..5d18cf7 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SYS_I2C) += i2c_core.o
obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o
obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o
obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
+obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o
obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
ifdef CONFIG_DM_PCI
diff --git a/drivers/i2c/i2c-cortina.c b/drivers/i2c/i2c-cortina.c
new file mode 100644
index 0000000..08b812a
--- /dev/null
+++ b/drivers/i2c/i2c-cortina.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020
+ * Arthur Li, Cortina Access, arthur.li at cortina-access.com.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <mapmem.h>
+#include "i2c-cortina.h"
+
+static void set_speed(struct i2c_regs *regs, int i2c_spd)
+{
+ union ca_biw_cfg i2c_cfg;
+
+ i2c_cfg.wrd = readl(®s->i2c_cfg);
+ i2c_cfg.bf.core_en = 0;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+
+ switch (i2c_spd) {
+ case IC_SPEED_MODE_FAST_PLUS:
+ i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
+ (5 * I2C_SPEED_FAST_PLUS_RATE) - 1;
+ break;
+
+ case IC_SPEED_MODE_STANDARD:
+ i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
+ (5 * I2C_SPEED_STANDARD_RATE) - 1;
+ break;
+
+ case IC_SPEED_MODE_FAST:
+ default:
+ i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
+ (5 * I2C_SPEED_FAST_RATE) - 1;
+ break;
+ }
+
+ i2c_cfg.bf.core_en = 1;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+}
+
+static int ca_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+ int i2c_spd;
+
+ if (speed >= I2C_SPEED_FAST_PLUS_RATE) {
+ i2c_spd = IC_SPEED_MODE_FAST_PLUS;
+ priv->speed = I2C_SPEED_FAST_PLUS_RATE;
+ } else if (speed >= I2C_SPEED_FAST_RATE) {
+ i2c_spd = IC_SPEED_MODE_FAST;
+ priv->speed = I2C_SPEED_FAST_RATE;
+ } else {
+ i2c_spd = IC_SPEED_MODE_STANDARD;
+ priv->speed = I2C_SPEED_STANDARD_RATE;
+ }
+
+ set_speed(priv->regs, i2c_spd);
+
+ return 0;
+}
+
+static int ca_i2c_get_bus_speed(struct udevice *bus)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+
+ return priv->speed;
+}
+
+static void ca_i2c_init(struct i2c_regs *regs)
+{
+ union ca_biw_cfg i2c_cfg;
+
+ i2c_cfg.wrd = readl(®s->i2c_cfg);
+ i2c_cfg.bf.core_en = 0;
+ i2c_cfg.bf.biw_soft_reset = 1;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+ mdelay(10);
+ i2c_cfg.bf.biw_soft_reset = 0;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+
+ set_speed(regs, IC_SPEED_MODE_STANDARD);
+
+ i2c_cfg.wrd = readl(®s->i2c_cfg);
+ i2c_cfg.bf.core_en = 1;
+ writel(i2c_cfg.wrd, ®s->i2c_cfg);
+}
+
+static int i2c_wait_complete(struct i2c_regs *regs)
+{
+ union ca_biw_ctrl i2c_ctrl;
+ unsigned long start_time_bb = get_timer(0);
+
+ i2c_ctrl.wrd = readl(®s->i2c_ctrl);
+
+ while (i2c_ctrl.bf.biwdone == 0) {
+ i2c_ctrl.wrd = readl(®s->i2c_ctrl);
+
+ if (get_timer(start_time_bb) >
+ (unsigned long)(I2C_BYTE_TO_BB)) {
+ printf("%s not done!!!\n", __func__);
+ return -ETIMEDOUT;
+ }
+ }
+
+ /* Clear done bit */
+ writel(i2c_ctrl.wrd, ®s->i2c_ctrl);
+
+ return 0;
+}
+
+static void i2c_setaddress(struct i2c_regs *regs, unsigned int i2c_addr,
+ int write_read)
+{
+ writel(i2c_addr | write_read, ®s->i2c_txr);
+
+ writel(BIW_CTRL_START | BIW_CTRL_WRITE,
+ ®s->i2c_ctrl);
+
+ i2c_wait_complete(regs);
+}
+
+static int i2c_wait_for_bus_busy(struct i2c_regs *regs)
+{
+ union ca_biw_ack i2c_ack;
+ unsigned long start_time_bb = get_timer(0);
+
+ i2c_ack.wrd = readl(®s->i2c_ack);
+
+ while (i2c_ack.bf.biw_busy) {
+ i2c_ack.wrd = readl(®s->i2c_ack);
+
+ if (get_timer(start_time_bb) >
+ (unsigned long)(I2C_BYTE_TO_BB)) {
+ printf("%s: timeout!\n", __func__);
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int i2c_xfer_init(struct i2c_regs *regs, uint8_t chip, uint addr,
+ int alen, int write_read)
+{
+ int addr_len = alen;
+
+ if (i2c_wait_for_bus_busy(regs))
+ return 1;
+
+ /* First cycle must write addr + offset */
+ chip = ((chip & 0x7F) << 1);
+ if (alen == 0 && write_read == I2C_CMD_RD)
+ i2c_setaddress(regs, chip, I2C_CMD_RD);
+ else
+ i2c_setaddress(regs, chip, I2C_CMD_WT);
+
+ while (alen) {
+ alen--;
+ writel(addr, ®s->i2c_txr);
+ if (write_read == I2C_CMD_RD)
+ writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
+ ®s->i2c_ctrl);
+ else
+ writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
+ i2c_wait_complete(regs);
+ }
+
+ /* Send address again with Read flag if it's read command */
+ if (write_read == I2C_CMD_RD && addr_len > 0)
+ i2c_setaddress(regs, chip, I2C_CMD_RD);
+
+ return 0;
+}
+
+static int i2c_xfer_finish(struct i2c_regs *regs)
+{
+ /* Dummy read makes bus free */
+ writel(BIW_CTRL_READ | BIW_CTRL_STOP, ®s->i2c_ctrl);
+ i2c_wait_complete(regs);
+
+ if (i2c_wait_for_bus_busy(regs)) {
+ printf("Timed out waiting for bus\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int ca_i2c_read(struct i2c_regs *regs, uint8_t chip, uint addr,
+ int alen, uint8_t *buffer, int len)
+{
+ unsigned long start_time_rx;
+ int rc = 0;
+
+ rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_RD);
+ if (rc)
+ return rc;
+
+ start_time_rx = get_timer(0);
+ while (len) {
+ /* ACK_IN is ack value to send during read.
+ * ack high only on the very last byte!
+ */
+ if (len == 1)
+ writel(BIW_CTRL_READ | BIW_CTRL_ACK_IN | BIW_CTRL_STOP,
+ ®s->i2c_ctrl);
+ else
+ writel(BIW_CTRL_READ, ®s->i2c_ctrl);
+
+ rc = i2c_wait_complete(regs);
+ udelay(1);
+
+ if (rc == 0) {
+ *buffer++ =
+ (uchar) readl(®s->i2c_rxr);
+ len--;
+ start_time_rx = get_timer(0);
+
+ } else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
+ return -ETIMEDOUT;
+ }
+ }
+ i2c_xfer_finish(regs);
+ return rc;
+}
+
+static int ca_i2c_write(struct i2c_regs *regs, uint8_t chip, uint addr,
+ int alen, uint8_t *buffer, int len)
+{
+ int rc, nb = len;
+ unsigned long start_time_tx;
+
+ rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_WT);
+ if (rc)
+ return rc;
+
+ start_time_tx = get_timer(0);
+ while (len) {
+ writel(*buffer, ®s->i2c_txr);
+ if (len == 1)
+ writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
+ ®s->i2c_ctrl);
+ else
+ writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
+
+ rc = i2c_wait_complete(regs);
+
+ if (rc == 0) {
+ len--;
+ buffer++;
+ start_time_tx = get_timer(0);
+ } else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int ca_i2c_probe_chip(struct udevice *bus, uint chip_addr,
+ uint chip_flags)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+ int ret;
+ u32 tmp;
+
+ /* Try to read the first location of the chip */
+ ret = ca_i2c_read(priv->regs, chip_addr, 0, 1, (uchar *)&tmp, 1);
+ if (ret)
+ ca_i2c_init(priv->regs);
+
+ return ret;
+}
+
+static int ca_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+ int ret;
+
+ debug("i2c_xfer: %d messages\n", nmsgs);
+ for (; nmsgs > 0; nmsgs--, msg++) {
+ debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+ if (msg->flags & I2C_M_RD)
+ ret = ca_i2c_read(priv->regs, msg->addr, 0, 0,
+ msg->buf, msg->len);
+ else
+ ret = ca_i2c_write(priv->regs, msg->addr, 0, 0,
+ msg->buf, msg->len);
+
+ if (ret) {
+ printf("i2c_xfer: %s error\n",
+ msg->flags & I2C_M_RD ? "read" : "write");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct dm_i2c_ops ca_i2c_ops = {
+ .xfer = ca_i2c_xfer,
+ .probe_chip = ca_i2c_probe_chip,
+ .set_bus_speed = ca_i2c_set_bus_speed,
+ .get_bus_speed = ca_i2c_get_bus_speed,
+};
+
+static const struct udevice_id ca_i2c_ids[] = {
+ { .compatible = "cortina,ca-i2c", },
+ { }
+};
+
+static int ca_i2c_probe(struct udevice *bus)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+
+ ca_i2c_init(priv->regs);
+
+ return 0;
+}
+
+static int ca_i2c_ofdata_to_platdata(struct udevice *bus)
+{
+ struct ca_i2c *priv = dev_get_priv(bus);
+
+ priv->regs = map_sysmem(dev_read_addr(bus), sizeof(struct i2c_regs));
+ if (!priv->regs) {
+ printf("I2C: base address is invalid\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+U_BOOT_DRIVER(i2c_cortina) = {
+ .name = "i2c_cortina",
+ .id = UCLASS_I2C,
+ .of_match = ca_i2c_ids,
+ .ofdata_to_platdata = ca_i2c_ofdata_to_platdata,
+ .probe = ca_i2c_probe,
+ .priv_auto_alloc_size = sizeof(struct ca_i2c),
+ .ops = &ca_i2c_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/i2c/i2c-cortina.h b/drivers/i2c/i2c-cortina.h
new file mode 100644
index 0000000..2d46c4f
--- /dev/null
+++ b/drivers/i2c/i2c-cortina.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019
+ * Cortina Access, <www.cortina-access.com>
+ */
+
+#ifndef __CA_I2C_H_
+#define __CA_I2C_H_
+
+#if !defined(__ASSEMBLER__) && !defined(__ASSEMBLY__)
+struct i2c_regs {
+ u32 i2c_cfg;
+ u32 i2c_ctrl;
+ u32 i2c_txr;
+ u32 i2c_rxr;
+ u32 i2c_ack;
+ u32 i2c_ie0;
+ u32 i2c_int0;
+ u32 i2c_ie1;
+ u32 i2c_int1;
+ u32 i2c_stat;
+};
+
+union ca_biw_cfg {
+ struct biw_cfg {
+ u32 core_en : 1;
+ u32 biw_soft_reset : 1;
+ u32 busywait_en : 1;
+ u32 stretch_en : 1;
+ u32 arb_en : 1;
+ u32 clksync_en : 1;
+ u32 rsrvd1 : 2;
+ u32 spike_cnt : 4;
+ u32 rsrvd2 : 4;
+ u32 prer : 16;
+ } bf;
+ unsigned int wrd;
+};
+
+union ca_biw_ctrl {
+ struct biw_ctrl {
+ u32 biwdone : 1;
+ u32 rsrvd1 : 2;
+ u32 ack_in : 1;
+ u32 write : 1;
+ u32 read : 1;
+ u32 stop : 1;
+ u32 start : 1;
+ u32 rsrvd2 : 24;
+ } bf;
+ unsigned int wrd;
+};
+
+union ca_biw_ack {
+ struct biw_ack {
+ u32 al :1;
+ u32 biw_busy :1;
+ u32 ack_out :1;
+ u32 rsrvd1 :29;
+ } bf;
+ unsigned int wrd;
+};
+#endif /* !__ASSEMBLER__*/
+
+struct ca_i2c {
+ struct i2c_regs *regs;
+ unsigned int speed;
+};
+
+#define I2C_CMD_WT 0
+#define I2C_CMD_RD 1
+
+#define BIW_CTRL_DONE BIT(0)
+#define BIW_CTRL_ACK_IN BIT(3)
+#define BIW_CTRL_WRITE BIT(4)
+#define BIW_CTRL_READ BIT(5)
+#define BIW_CTRL_STOP BIT(6)
+#define BIW_CTRL_START BIT(7)
+
+#define I2C_BYTE_TO (CONFIG_SYS_HZ / 500)
+#define I2C_STOPDET_TO (CONFIG_SYS_HZ / 500)
+#define I2C_BYTE_TO_BB (10)
+
+#endif /* __CA_I2C_H_ */
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 4/8] board: presidio-asic: Add I2C support
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
` (2 preceding siblings ...)
2020-04-21 5:29 ` [PATCH v6 3/8] i2c: i2c-cortina: added CAxxxx I2C support Alex Nemirovsky
@ 2020-04-21 5:29 ` Alex Nemirovsky
2020-04-21 5:47 ` Heiko Schocher
2020-04-21 5:29 ` [PATCH v6 5/8] led: led_cortina: Add CAxxx LED support Alex Nemirovsky
` (3 subsequent siblings)
7 siblings, 1 reply; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
Add I2C board support for Cortina Access Presidio Engineering Board
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Heiko Schocher <hs@denx.de>
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
configs/cortina_presidio-asic-emmc_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig
index e10008a..e45e23c 100644
--- a/configs/cortina_presidio-asic-emmc_defconfig
+++ b/configs/cortina_presidio-asic-emmc_defconfig
@@ -10,6 +10,7 @@ CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_WDT=y
@@ -24,6 +25,8 @@ CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
# CONFIG_NET is not set
CONFIG_DM=y
CONFIG_CORTINA_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CA=y
CONFIG_DM_MMC=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_CORTINA=y
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 5/8] led: led_cortina: Add CAxxx LED support
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
` (3 preceding siblings ...)
2020-04-21 5:29 ` [PATCH v6 4/8] board: presidio-asic: Add " Alex Nemirovsky
@ 2020-04-21 5:29 ` Alex Nemirovsky
2020-04-21 17:37 ` Simon Glass
2020-04-21 5:29 ` [PATCH v6 6/8] board: presidio: add " Alex Nemirovsky
` (2 subsequent siblings)
7 siblings, 1 reply; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
From: Jway Lin <jway.lin@cortina-access.com>
Add Cortina Access LED controller support for CAxxxx SOCs
Signed-off-by: Jway Lin <jway.lin@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Simon Glass <sjg@chromium.org>
---
Changes in v6: None
Changes in v5: None
Changes in v4:
- remove unused macros
- remove cortina prefix from macros
- remove use BSS variable
- further cleanup to meet code style guidelines
- add additinal struct comments
- rename DT blink rate symbol
Changes in v3: None
Changes in v2: None
MAINTAINERS | 2 +
drivers/led/Kconfig | 8 ++
drivers/led/Makefile | 1 +
drivers/led/led_cortina.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 279 insertions(+)
create mode 100644 drivers/led/led_cortina.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 307e620..e9b6bfa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -183,6 +183,7 @@ F: drivers/serial/serial_cortina.c
F: drivers/mmc/ca_dw_mmc.c
F: drivers/i2c/i2c-cortina.c
F: drivers/i2c/i2c-cortina.h
+F: drivers/led/led_cortina.c
ARM/CZ.NIC TURRIS MOX SUPPORT
M: Marek Behun <marek.behun@nic.cz>
@@ -724,6 +725,7 @@ F: drivers/serial/serial_cortina.c
F: drivers/mmc/ca_dw_mmc.c
F: drivers/i2c/i2c-cortina.c
F: drivers/i2c/i2c-cortina.h
+F: drivers/led/led_cortina.c
MIPS MSCC
M: Gregory CLEMENT <gregory.clement@bootlin.com>
diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
index 6675934..cc87fbf 100644
--- a/drivers/led/Kconfig
+++ b/drivers/led/Kconfig
@@ -35,6 +35,14 @@ config LED_BCM6858
This option enables support for LEDs connected to the BCM6858
HW has blinking capabilities and up to 32 LEDs can be controlled.
+config LED_CORTINA
+ bool "LED Support for Cortina Access CAxxxx SoCs"
+ depends on LED && (CORTINA_PLATFORM)
+ help
+ This option enables support for LEDs connected to the Cortina
+ Access CAxxxx SOCs.
+
+
config LED_BLINK
bool "Support LED blinking"
depends on LED
diff --git a/drivers/led/Makefile b/drivers/led/Makefile
index 3654dd3..8e3ae7f 100644
--- a/drivers/led/Makefile
+++ b/drivers/led/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_LED_BCM6328) += led_bcm6328.o
obj-$(CONFIG_LED_BCM6358) += led_bcm6358.o
obj-$(CONFIG_LED_BCM6858) += led_bcm6858.o
obj-$(CONFIG_$(SPL_)LED_GPIO) += led_gpio.o
+obj-$(CONFIG_LED_CORTINA) += led_cortina.o
diff --git a/drivers/led/led_cortina.c b/drivers/led/led_cortina.c
new file mode 100644
index 0000000..f873d30
--- /dev/null
+++ b/drivers/led/led_cortina.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright (C) 2020 Cortina-Access
+ * Author: Jway Lin <jway.lin@cortina-access.com>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <led.h>
+#include <asm/io.h>
+#include <dm/lists.h>
+
+#define LED_MAX_HW_BLINK 127
+#define LED_MAX_COUNT 16
+
+/* LED_CONTROL fields */
+#define LED_BLINK_RATE1_OFFSET 0
+#define LED_BLINK_RATE1_MASK 0xff
+#define LED_BLINK_RATE2_OFFSET 8
+#define LED_BLINK_RATE2_MASK 0xff
+#define LED_CLK_TEST BIT(16)
+#define LED_CLK_POLARITY BIT(17)
+#define LED_CLK_TEST_MODE BIT(16)
+#define LED_CLK_TEST_RX_TEST BIT(30)
+#define LED_CLK_TEST_TX_TEST BIT(31)
+
+/* LED_CONFIG fields */
+#define LED_EVENT_ON_OFFSET 0
+#define LED_EVENT_ON_MASK 0x7
+#define LED_EVENT_BLINK_OFFSET 3
+#define LED_EVENT_BLINK_MASK 0x7
+#define LED_EVENT_OFF_OFFSET 6
+#define LED_EVENT_OFF_MASK 0x7
+#define LED_OFF_ON_OFFSET 9
+#define LED_OFF_ON_MASK 0x3
+#define LED_PORT_OFFSET 11
+#define LED_PORT_MASK 0x7
+#define LED_OFF_VAL BIT(14)
+#define LED_SW_EVENT BIT(15)
+#define LED_BLINK_SEL BIT(16)
+
+/* LED_CONFIG structures */
+struct cortina_led_cfg {
+ void __iomem *regs;
+ int idx;
+ bool active_low;
+ int off_event; /* set led off event */
+ int blink_event; /* set led blink event */
+ int on_event; /* set led on event */
+ int port; /* corresponding ethernet port */
+ int blink; /* blink rate sel */
+};
+
+static void cortina_led_write(void __iomem *reg, unsigned long data)
+{
+ writel(data, reg);
+}
+
+static unsigned long cortina_led_read(void __iomem *reg)
+{
+ return readl(reg);
+}
+
+static enum led_state_t cortina_led_get_state(struct udevice *dev)
+{
+ struct cortina_led_cfg *priv = dev_get_priv(dev);
+ enum led_state_t state = LEDST_OFF;
+ u32 val;
+
+ val = readl(priv->regs);
+
+ if (val & LED_SW_EVENT)
+ state = LEDST_ON;
+
+ return state;
+}
+
+static int cortina_led_set_state(struct udevice *dev, enum led_state_t state)
+{
+ u32 val;
+ struct cortina_led_cfg *priv = dev_get_priv(dev);
+
+ val = readl(priv->regs);
+
+ switch (state) {
+ case LEDST_OFF:
+ val &= ~LED_SW_EVENT;
+ val &= ~(LED_OFF_ON_MASK << LED_OFF_ON_OFFSET);
+ val |= 0x3 << LED_OFF_ON_OFFSET;
+ cortina_led_write(priv->regs, val);
+ break;
+ case LEDST_ON:
+ val |= LED_SW_EVENT;
+ val &= ~(LED_OFF_ON_MASK << LED_OFF_ON_OFFSET);
+ val |= 0x1 << LED_OFF_ON_OFFSET;
+ cortina_led_write(priv->regs, val);
+ break;
+ case LEDST_TOGGLE:
+ if (cortina_led_get_state(dev) == LEDST_OFF)
+ return cortina_led_set_state(dev, LEDST_ON);
+ else
+ return cortina_led_set_state(dev, LEDST_OFF);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct led_ops cortina_led_ops = {
+ .get_state = cortina_led_get_state,
+ .set_state = cortina_led_set_state,
+};
+
+static int cortina_led_probe(struct udevice *dev)
+{
+ struct led_uc_plat *uc_plat = dev_get_uclass_platdata(dev);
+
+ /* Top-level LED node */
+ if (!uc_plat->label) {
+ void __iomem *regs;
+ u32 reg_value, val;
+ u16 rate1, rate2;
+
+ regs = dev_remap_addr(dev);
+ if (!regs)
+ return -EINVAL;
+
+ reg_value = 0;
+ reg_value |= LED_CLK_POLARITY;
+
+ rate1 = dev_read_u32_default(dev, "cortina,blink-rate1", 256);
+ rate2 = dev_read_u32_default(dev, "cortina,blink-rate2", 512);
+
+ val = rate1 / 16 - 1;
+ rate1 = val > LED_MAX_HW_BLINK ?
+ LED_MAX_HW_BLINK : val;
+ reg_value |= (rate1 & LED_BLINK_RATE1_MASK) <<
+ LED_BLINK_RATE1_OFFSET;
+
+ val = rate2 / 16 - 1;
+ rate2 = val > LED_MAX_HW_BLINK ?
+ LED_MAX_HW_BLINK : val;
+ reg_value |= (rate2 & LED_BLINK_RATE2_MASK) <<
+ LED_BLINK_RATE2_OFFSET;
+
+ cortina_led_write(regs, reg_value);
+
+ } else {
+ struct cortina_led_cfg *priv = dev_get_priv(dev);
+ void __iomem *regs;
+ u32 pin, val, blink, port, off_event, blink_event, on_event;
+
+ regs = dev_remap_addr(dev_get_parent(dev));
+ if (!regs)
+ return -EINVAL;
+
+ pin = dev_read_u32_default(dev, "pin", LED_MAX_COUNT);
+
+ if (pin >= LED_MAX_COUNT)
+ return -EINVAL;
+
+ priv->regs = regs + 4 + pin * 4;
+
+ val = cortina_led_read(priv->regs);
+
+ if (dev_read_bool(dev, "active-low")) {
+ priv->active_low = true;
+ val |= LED_OFF_VAL;
+ } else {
+ priv->active_low = false;
+ val &= ~LED_OFF_VAL;
+ }
+
+ blink = dev_read_u32_default(dev, "blink-sel", 0);
+
+ if (blink == 0) {
+ priv->blink = 0;
+ val &= ~LED_BLINK_SEL;
+ } else if (blink == 1) {
+ priv->blink = 1;
+ val |= LED_BLINK_SEL;
+ }
+
+ off_event = dev_read_u32_default(dev, "off-event", 3);
+ val &= ~(LED_EVENT_OFF_MASK << LED_EVENT_OFF_OFFSET);
+ if (off_event != 3) {
+ priv->off_event = off_event;
+ val |= BIT(off_event) << LED_EVENT_OFF_OFFSET;
+ }
+
+ blink_event = dev_read_u32_default(dev, "blink-event", 3);
+ val &= ~(LED_EVENT_BLINK_MASK << LED_EVENT_BLINK_OFFSET);
+ if (blink_event != 3) {
+ priv->blink_event = blink_event;
+ val |= BIT(blink_event) << LED_EVENT_BLINK_OFFSET;
+ }
+
+ on_event = dev_read_u32_default(dev, "on-event", 3);
+ val &= ~(LED_EVENT_ON_MASK << LED_EVENT_ON_OFFSET);
+ if (on_event != 3) {
+ priv->on_event = on_event;
+ val |= BIT(on_event) << LED_EVENT_ON_OFFSET;
+ }
+
+ port = dev_read_u32_default(dev, "port", 0);
+ priv->port = port;
+ val &= ~(LED_PORT_MASK << LED_PORT_OFFSET);
+ val |= port << LED_PORT_OFFSET;
+
+ /* force off */
+ val &= ~(LED_OFF_ON_MASK << LED_OFF_ON_OFFSET);
+ val |= 0x3 << LED_OFF_ON_OFFSET;
+
+ cortina_led_write(priv->regs, val);
+ }
+
+ return 0;
+}
+
+static int cortina_led_bind(struct udevice *parent)
+{
+ ofnode node;
+
+ dev_for_each_subnode(node, parent) {
+ struct led_uc_plat *uc_plat;
+ struct udevice *dev;
+ const char *label;
+ int ret;
+
+ label = ofnode_read_string(node, "label");
+ if (!label) {
+ debug("%s: node %s has no label\n", __func__,
+ ofnode_get_name(node));
+ return -EINVAL;
+ }
+
+ ret = device_bind_driver_to_node(parent, "ca-leds",
+ ofnode_get_name(node),
+ node, &dev);
+ if (ret)
+ return ret;
+ uc_plat = dev_get_uclass_platdata(dev);
+ uc_plat->label = label;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id ca_led_ids[] = {
+ { .compatible = "cortina,ca-leds" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(cortina_led) = {
+ .name = "ca-leds",
+ .id = UCLASS_LED,
+ .of_match = ca_led_ids,
+ .bind = cortina_led_bind,
+ .probe = cortina_led_probe,
+ .priv_auto_alloc_size = sizeof(struct cortina_led_cfg),
+ .ops = &cortina_led_ops,
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 6/8] board: presidio: add LED support
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
` (4 preceding siblings ...)
2020-04-21 5:29 ` [PATCH v6 5/8] led: led_cortina: Add CAxxx LED support Alex Nemirovsky
@ 2020-04-21 5:29 ` Alex Nemirovsky
2020-04-21 17:36 ` Simon Glass
2020-04-21 5:29 ` [PATCH v6 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 8/8] board: presidio-asic: Add SPI NOR support Alex Nemirovsky
7 siblings, 1 reply; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
From: Jway Lin <jway.lin@cortina-access.com>
Add LED support for Cortina Access Presidio Engineering Board
Signed-off-by: Jway Lin <jway.lin@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
CC: Simon Glass <sjg@chromium.org>
---
Changes in v6: None
Changes in v5: None
Changes in v4:
- rename DT blink rate symbol
Changes in v3: None
Changes in v2: None
arch/arm/dts/ca-presidio-engboard.dts | 31 ++++++++++++++++++++++++++++
configs/cortina_presidio-asic-emmc_defconfig | 2 ++
2 files changed, 33 insertions(+)
diff --git a/arch/arm/dts/ca-presidio-engboard.dts b/arch/arm/dts/ca-presidio-engboard.dts
index 40c93d7..eef433e 100644
--- a/arch/arm/dts/ca-presidio-engboard.dts
+++ b/arch/arm/dts/ca-presidio-engboard.dts
@@ -64,4 +64,35 @@
spi-max-frequency = <108000000>;
};
};
+
+ leds: led-controller at f43200f0 {
+ compatible = "cortina,ca-leds";
+ reg = <0x0 0xf43200f0 0x40>;
+
+ cortina,blink-rate1 = <256>;
+ cortina,blink-rate2 = <512>;
+
+ led at 0 {
+ pin = <0>;
+ active-low;
+ blink-sel =<0>;
+ port = <0>;
+ off-event = <0>;
+ label = "led0";
+ };
+
+ led at 1 {
+ pin = <1>;
+ active-low;
+ blink-sel =<1>;
+ label = "led1";
+ };
+
+ led at 2 {
+ pin = <2>;
+ active-low;
+ label = "led2";
+ };
+
+ };
};
diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig
index e45e23c..3c6bd6b 100644
--- a/configs/cortina_presidio-asic-emmc_defconfig
+++ b/configs/cortina_presidio-asic-emmc_defconfig
@@ -27,6 +27,8 @@ CONFIG_DM=y
CONFIG_CORTINA_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CA=y
+CONFIG_LED=y
+CONFIG_LED_CORTINA=y
CONFIG_DM_MMC=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_CORTINA=y
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
` (5 preceding siblings ...)
2020-04-21 5:29 ` [PATCH v6 6/8] board: presidio: add " Alex Nemirovsky
@ 2020-04-21 5:29 ` Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 8/8] board: presidio-asic: Add SPI NOR support Alex Nemirovsky
7 siblings, 0 replies; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
From: Pengpeng Chen <pengpeng.chen@cortina-access.com>
Add SPI Flash controller driver for Cortina Access
CAxxxx SoCs
Signed-off-by: Pengpeng Chen <pengpeng.chen@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Vignesh R <vigneshr@ti.com>
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Fixup syntax issues related to checkpatch.pl cleanup
Changes in v2: None
MAINTAINERS | 2 +
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/ca_sflash.c | 576 ++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 587 insertions(+)
create mode 100644 drivers/spi/ca_sflash.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e9b6bfa..5047748 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -184,6 +184,7 @@ F: drivers/mmc/ca_dw_mmc.c
F: drivers/i2c/i2c-cortina.c
F: drivers/i2c/i2c-cortina.h
F: drivers/led/led_cortina.c
+F: drivers/spi/ca_sflash.c
ARM/CZ.NIC TURRIS MOX SUPPORT
M: Marek Behun <marek.behun@nic.cz>
@@ -726,6 +727,7 @@ F: drivers/mmc/ca_dw_mmc.c
F: drivers/i2c/i2c-cortina.c
F: drivers/i2c/i2c-cortina.h
F: drivers/led/led_cortina.c
+F: drivers/spi/ca_sflash.c
MIPS MSCC
M: Gregory CLEMENT <gregory.clement@bootlin.com>
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4166c61..8a244f1 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -106,6 +106,14 @@ config BCMSTB_SPI
be used to access the SPI flash on platforms embedding this
Broadcom SPI core.
+config CORTINA_SFLASH
+ bool "Cortina-Access Serial Flash controller driver"
+ depends on DM_SPI && SPI_MEM
+ help
+ Enable the Cortina-Access Serial Flash controller driver. This driver
+ can be used to access the SPI NOR/NAND flash on platforms embedding this
+ Cortina-Access IP core.
+
config CADENCE_QSPI
bool "Cadence QSPI driver"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 52462e1..32b98b4 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_BCM63XX_SPI) += bcm63xx_spi.o
obj-$(CONFIG_BCMSTB_SPI) += bcmstb_spi.o
obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
obj-$(CONFIG_CF_SPI) += cf_spi.o
+obj-$(CONFIG_CORTINA_SFLASH) += ca_sflash.o
obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
diff --git a/drivers/spi/ca_sflash.c b/drivers/spi/ca_sflash.c
new file mode 100644
index 0000000..0709650
--- /dev/null
+++ b/drivers/spi/ca_sflash.c
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Cortina SPI-FLASH Controller
+ *
+ * Copyright (C) 2020 Cortina Access Inc. All Rights Reserved.
+ *
+ * Author: PengPeng Chen <pengpeng.chen@cortina-access.com>
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <linux/compat.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+#include <linux/sizes.h>
+#include <spi.h>
+#include <spi-mem.h>
+#include <reset.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct ca_sflash_regs {
+ u32 idr; /* 0x00:Flash word ID Register */
+ u32 tc; /* 0x04:Flash Timeout Counter Register */
+ u32 sr; /* 0x08:Flash Status Register */
+ u32 tr; /* 0x0C:Flash Type Register */
+ u32 asr; /* 0x10:Flash ACCESS START/BUSY Register */
+ u32 isr; /* 0x14:Flash Interrupt Status Register */
+ u32 imr; /* 0x18:Flash Interrupt Mask Register */
+ u32 fcr; /* 0x1C:NAND Flash FIFO Control Register */
+ u32 ffsr; /* 0x20:Flash FIFO Status Register */
+ u32 ffar; /* 0x24:Flash FIFO ADDRESS Register */
+ u32 ffmar; /* 0x28:Flash FIFO MATCHING ADDRESS Register */
+ u32 ffdr; /* 0x2C:Flash FIFO Data Register */
+ u32 ar; /* 0x30:Serial Flash Access Register */
+ u32 ear; /* 0x34:Serial Flash Extend Access Register */
+ u32 adr; /* 0x38:Serial Flash ADdress Register */
+ u32 dr; /* 0x3C:Serial Flash Data Register */
+ u32 tmr; /* 0x40:Serial Flash Timing Register */
+};
+
+/*
+ * FLASH_TYPE
+ */
+#define CA_FLASH_TR_PIN BIT(15)
+#define CA_FLASH_TR_TYPE_MASK GENMASK(14, 12)
+#define CA_FLASH_TR_TYPE(tp) (((tp) << 12) & CA_FLASH_TR_TYPE_MASK)
+#define CA_FLASH_TR_WIDTH BIT(11)
+#define CA_FLASH_TR_SIZE_MASK GENMASK(10, 9)
+#define CA_FLASH_TR_SIZE(sz) (((sz) << 9) & CA_FLASH_TR_SIZE_MASK)
+
+/*
+ * FLASH_FLASH_ACCESS_START
+ */
+#define CA_FLASH_ASR_IND_START_EN BIT(1)
+#define CA_FLASH_ASR_DMA_START_EN BIT(3)
+#define CA_FLASH_ASR_WR_ACCESS_EN BIT(9)
+
+/*
+ * FLASH_FLASH_INTERRUPT
+ */
+#define CA_FLASH_ISR_REG_IRQ BIT(1)
+#define CA_FLASH_ISR_FIFO_IRQ BIT(2)
+
+/*
+ * FLASH_SF_ACCESS
+ */
+#define CA_SF_AR_OPCODE_MASK GENMASK(7, 0)
+#define CA_SF_AR_OPCODE(op) ((op) << 0 & CA_SF_AR_OPCODE_MASK)
+#define CA_SF_AR_ACCODE_MASK GENMASK(11, 8)
+#define CA_SF_AR_ACCODE(ac) (((ac) << 8) & CA_SF_AR_ACCODE_MASK)
+#define CA_SF_AR_FORCE_TERM BIT(12)
+#define CA_SF_AR_FORCE_BURST BIT(13)
+#define CA_SF_AR_AUTO_MODE_EN BIT(15)
+#define CA_SF_AR_CHIP_EN_ALT BIT(16)
+#define CA_SF_AR_HI_SPEED_RD BIT(17)
+#define CA_SF_AR_MIO_INF_DC BIT(24)
+#define CA_SF_AR_MIO_INF_AC BIT(25)
+#define CA_SF_AR_MIO_INF_CC BIT(26)
+#define CA_SF_AR_DDR_MASK GENMASK(29, 28)
+#define CA_SF_AR_DDR(ddr) (((ddr) << 28) & CA_SF_AR_DDR_MASK)
+#define CA_SF_AR_MIO_INF_MASK GENMASK(31, 30)
+#define CA_SF_AR_MIO_INF(io) (((io) << 30) & CA_SF_AR_MIO_INF_MASK)
+
+/*
+ * FLASH_SF_EXT_ACCESS
+ */
+#define CA_SF_EAR_OPCODE_MASK GENMASK(7, 0)
+#define CA_SF_EAR_OPCODE(op) (((op) << 0) & CA_SF_EAR_OPCODE_MASK)
+#define CA_SF_EAR_DATA_CNT_MASK GENMASK(20, 8)
+#define CA_SF_EAR_DATA_CNT(cnt) (((cnt) << 8) & CA_SF_EAR_DATA_CNT_MASK)
+#define CA_SF_EAR_DATA_CNT_MAX (4096)
+#define CA_SF_EAR_ADDR_CNT_MASK GENMASK(23, 21)
+#define CA_SF_EAR_ADDR_CNT(cnt) (((cnt) << 21) & CA_SF_EAR_ADDR_CNT_MASK)
+#define CA_SF_EAR_ADDR_CNT_MAX (5)
+#define CA_SF_EAR_DUMY_CNT_MASK GENMASK(29, 24)
+#define CA_SF_EAR_DUMY_CNT(cnt) (((cnt) << 24) & CA_SF_EAR_DUMY_CNT_MASK)
+#define CA_SF_EAR_DUMY_CNT_MAX (32)
+#define CA_SF_EAR_DRD_CMD_EN BIT(31)
+
+/*
+ * FLASH_SF_ADDRESS
+ */
+#define CA_SF_ADR_REG_MASK GENMASK(31, 0)
+#define CA_SF_ADR_REG(addr) (((addr) << 0) & CA_SF_ADR_REG_MASK)
+
+/*
+ * FLASH_SF_DATA
+ */
+#define CA_SF_DR_REG_MASK GENMASK(31, 0)
+#define CA_SF_DR_REG(addr) (((addr) << 0) & CA_SF_DR_REG_MASK)
+
+/*
+ * FLASH_SF_TIMING
+ */
+#define CA_SF_TMR_IDLE_MASK GENMASK(7, 0)
+#define CA_SF_TMR_IDLE(idle) (((idle) << 0) & CA_SF_TMR_IDLE_MASK)
+#define CA_SF_TMR_HOLD_MASK GENMASK(15, 8)
+#define CA_SF_TMR_HOLD(hold) (((hold) << 8) & CA_SF_TMR_HOLD_MASK)
+#define CA_SF_TMR_SETUP_MASK GENMASK(23, 16)
+#define CA_SF_TMR_SETUP(setup) (((setup) << 16) & CA_SF_TMR_SETUP_MASK)
+#define CA_SF_TMR_CLK_MASK GENMASK(26, 24)
+#define CA_SF_TMR_CLK(clk) (((clk) << 24) & CA_SF_TMR_CLK_MASK)
+
+#define CA_SFLASH_IND_WRITE 0
+#define CA_SFLASH_IND_READ 1
+#define CA_SFLASH_MEM_MAP 3
+#define CA_SFLASH_FIFO_TIMEOUT_US 30000
+#define CA_SFLASH_BUSY_TIMEOUT_US 40000
+
+#define CA_SF_AC_OPCODE 0x00
+#define CA_SF_AC_OPCODE_1_DATA 0x01
+#define CA_SF_AC_OPCODE_2_DATA 0x02
+#define CA_SF_AC_OPCODE_3_DATA 0x03
+#define CA_SF_AC_OPCODE_4_DATA 0x04
+#define CA_SF_AC_OPCODE_3_ADDR 0x05
+#define CA_SF_AC_OPCODE_4_ADDR (CA_SF_AC_OPCODE_3_ADDR)
+#define CA_SF_AC_OPCODE_3_ADDR_1_DATA 0x06
+#define CA_SF_AC_OPCODE_4_ADDR_1_DATA (CA_SF_AC_OPCODE_3_ADDR_1_DATA << 2)
+#define CA_SF_AC_OPCODE_3_ADDR_2_DATA 0x07
+#define CA_SF_AC_OPCODE_4_ADDR_2_DATA (CA_SF_AC_OPCODE_3_ADDR_2_DATA << 2)
+#define CA_SF_AC_OPCODE_3_ADDR_3_DATA 0x08
+#define CA_SF_AC_OPCODE_4_ADDR_3_DATA (CA_SF_AC_OPCODE_3_ADDR_3_DATA << 2)
+#define CA_SF_AC_OPCODE_3_ADDR_4_DATA 0x09
+#define CA_SF_AC_OPCODE_4_ADDR_4_DATA (CA_SF_AC_OPCODE_3_ADDR_4_DATA << 2)
+#define CA_SF_AC_OPCODE_3_ADDR_X_1_DATA 0x0A
+#define CA_SF_AC_OPCODE_4_ADDR_X_1_DATA (CA_SF_AC_OPCODE_3_ADDR_X_1_DATA << 2)
+#define CA_SF_AC_OPCODE_3_ADDR_X_2_DATA 0x0B
+#define CA_SF_AC_OPCODE_4_ADDR_X_2_DATA (CA_SF_AC_OPCODE_3_ADDR_X_2_DATA << 2)
+#define CA_SF_AC_OPCODE_3_ADDR_X_3_DATA 0x0C
+#define CA_SF_AC_OPCODE_4_ADDR_X_3_DATA (CA_SF_AC_OPCODE_3_ADDR_X_3_DATA << 2)
+#define CA_SF_AC_OPCODE_3_ADDR_X_4_DATA 0x0D
+#define CA_SF_AC_OPCODE_4_ADDR_X_4_DATA (CA_SF_AC_OPCODE_3_ADDR_X_4_DATA << 2)
+#define CA_SF_AC_OPCODE_3_ADDR_4X_1_DATA 0x0E
+#define CA_SF_AC_OPCODE_4_ADDR_4X_1_DATA (CA_SF_AC_OPCODE_3_ADDR_4X_1_DATA << 2)
+#define CA_SF_AC_OPCODE_EXTEND 0x0F
+
+#define CA_SF_ACCESS_MIO_SINGLE 0
+#define CA_SF_ACCESS_MIO_DUAL 1
+#define CA_SF_ACCESS_MIO_QUARD 2
+
+enum access_type {
+ RD_ACCESS,
+ WR_ACCESS,
+};
+
+struct ca_sflash_priv {
+ struct ca_sflash_regs *regs;
+ u8 rx_width;
+ u8 tx_width;
+};
+
+/*
+ * This function doesn't do anything except help with debugging
+ */
+static int ca_sflash_claim_bus(struct udevice *dev)
+{
+ debug("%s:\n", __func__);
+ return 0;
+}
+
+static int ca_sflash_release_bus(struct udevice *dev)
+{
+ debug("%s:\n", __func__);
+ return 0;
+}
+
+static int ca_sflash_set_speed(struct udevice *dev, uint speed)
+{
+ debug("%s:\n", __func__);
+ return 0;
+}
+
+static int ca_sflash_set_mode(struct udevice *dev, uint mode)
+{
+ struct ca_sflash_priv *priv = dev_get_priv(dev);
+
+ if (mode & SPI_RX_QUAD)
+ priv->rx_width = 4;
+ else if (mode & SPI_RX_DUAL)
+ priv->rx_width = 2;
+ else
+ priv->rx_width = 1;
+
+ if (mode & SPI_TX_QUAD)
+ priv->tx_width = 4;
+ else if (mode & SPI_TX_DUAL)
+ priv->tx_width = 2;
+ else
+ priv->tx_width = 1;
+
+ debug("%s: mode=%d, rx_width=%d, tx_width=%d\n",
+ __func__, mode, priv->rx_width, priv->tx_width);
+
+ return 0;
+}
+
+static int _ca_sflash_wait_for_not_busy(struct ca_sflash_priv *priv)
+{
+ u32 asr;
+
+ if (readl_poll_timeout(&priv->regs->asr, asr,
+ !(asr & CA_FLASH_ASR_IND_START_EN),
+ CA_SFLASH_BUSY_TIMEOUT_US)) {
+ pr_err("busy timeout (stat:%#x)\n", asr);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int _ca_sflash_wait_cmd(struct ca_sflash_priv *priv,
+ enum access_type type)
+{
+ if (type == WR_ACCESS) {
+ /* Enable write access and start the sflash indirect access */
+ clrsetbits_le32(&priv->regs->asr, GENMASK(31, 0),
+ CA_FLASH_ASR_WR_ACCESS_EN
+ | CA_FLASH_ASR_IND_START_EN);
+ } else if (type == RD_ACCESS) {
+ /* Start the sflash indirect access */
+ clrsetbits_le32(&priv->regs->asr, GENMASK(31, 0),
+ CA_FLASH_ASR_IND_START_EN);
+ } else {
+ printf("%s: !error access type.\n", __func__);
+ return -1;
+ }
+
+ /* Wait til the action(rd/wr) completed */
+ return _ca_sflash_wait_for_not_busy(priv);
+}
+
+static int _ca_sflash_read(struct ca_sflash_priv *priv,
+ u8 *buf, unsigned int data_len)
+{
+ u32 reg_data;
+ int len;
+
+ len = data_len;
+ while (len >= 4) {
+ if (_ca_sflash_wait_cmd(priv, RD_ACCESS))
+ return -1;
+ reg_data = readl(&priv->regs->dr);
+ *buf++ = reg_data & 0xFF;
+ *buf++ = (reg_data >> 8) & 0xFF;
+ *buf++ = (reg_data >> 16) & 0xFF;
+ *buf++ = (reg_data >> 24) & 0xFF;
+ len -= 4;
+ debug("%s: reg_data=%#08x\n",
+ __func__, reg_data);
+ }
+
+ if (len > 0) {
+ if (_ca_sflash_wait_cmd(priv, RD_ACCESS))
+ return -1;
+ reg_data = readl(&priv->regs->dr);
+ debug("%s: reg_data=%#08x\n",
+ __func__, reg_data);
+ }
+
+ switch (len) {
+ case 3:
+ *buf++ = reg_data & 0xFF;
+ *buf++ = (reg_data >> 8) & 0xFF;
+ *buf++ = (reg_data >> 16) & 0xFF;
+ break;
+ case 2:
+ *buf++ = reg_data & 0xFF;
+ *buf++ = (reg_data >> 8) & 0xFF;
+ break;
+ case 1:
+ *buf++ = reg_data & 0xFF;
+ break;
+ case 0:
+ break;
+ default:
+ printf("%s: error data_length %d!\n", __func__, len);
+ }
+
+ return 0;
+}
+
+static int _ca_sflash_mio_set(struct ca_sflash_priv *priv,
+ u8 width)
+{
+ if (width == 4) {
+ setbits_le32(&priv->regs->ar,
+ CA_SF_AR_MIO_INF_DC
+ | CA_SF_AR_MIO_INF(CA_SF_ACCESS_MIO_QUARD)
+ | CA_SF_AR_FORCE_BURST);
+ } else if (width == 2) {
+ setbits_le32(&priv->regs->ar,
+ CA_SF_AR_MIO_INF_DC
+ | CA_SF_AR_MIO_INF(CA_SF_ACCESS_MIO_DUAL)
+ | CA_SF_AR_FORCE_BURST);
+ } else if (width == 1) {
+ setbits_le32(&priv->regs->ar,
+ CA_SF_AR_MIO_INF(CA_SF_ACCESS_MIO_SINGLE)
+ | CA_SF_AR_FORCE_BURST);
+ } else {
+ printf("%s: error rx/tx width %d!\n", __func__, width);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int _ca_sflash_write(struct ca_sflash_priv *priv,
+ u8 *buf, unsigned int data_len)
+{
+ u32 reg_data;
+ int len;
+
+ len = data_len;
+ while (len > 0) {
+ reg_data = buf[0]
+ | (buf[1] << 8)
+ | (buf[2] << 16)
+ | (buf[3] << 24);
+
+ debug("%s: reg_data=%#08x\n",
+ __func__, reg_data);
+ /* Fill data */
+ clrsetbits_le32(&priv->regs->dr, GENMASK(31, 0), reg_data);
+
+ if (_ca_sflash_wait_cmd(priv, WR_ACCESS))
+ return -1;
+
+ len -= 4;
+ buf += 4;
+ }
+
+ return 0;
+}
+
+static int _ca_sflash_access_data(struct ca_sflash_priv *priv,
+ struct spi_mem_op *op)
+{
+ int total_cnt;
+ unsigned int len;
+ unsigned int data_cnt = op->data.nbytes;
+ u64 addr_offset = op->addr.val;
+ u8 addr_cnt = op->addr.nbytes;
+ u8 *data_buf = NULL;
+ u8 *buf = NULL;
+
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ data_buf = (u8 *)op->data.buf.in;
+ else
+ data_buf = (u8 *)op->data.buf.out;
+
+ if (data_cnt > CA_SF_EAR_DATA_CNT_MAX)
+ buf = malloc(CA_SF_EAR_DATA_CNT_MAX);
+ else
+ buf = malloc(data_cnt);
+
+ total_cnt = data_cnt;
+ while (total_cnt > 0) {
+ /* Fill address */
+ if (addr_cnt > 0)
+ clrsetbits_le32(&priv->regs->adr,
+ GENMASK(31, 0), (u32)addr_offset);
+
+ if (total_cnt > CA_SF_EAR_DATA_CNT_MAX) {
+ len = CA_SF_EAR_DATA_CNT_MAX;
+ addr_offset += CA_SF_EAR_DATA_CNT_MAX;
+ /* Clear start bit before next bulk read */
+ clrbits_le32(&priv->regs->asr, GENMASK(31, 0));
+ } else {
+ len = total_cnt;
+ }
+
+ memset(buf, 0, len);
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ if (_ca_sflash_read(priv, buf, len))
+ break;
+ memcpy(data_buf, buf, len);
+ } else {
+ memcpy(buf, data_buf, len);
+ if (_ca_sflash_write(priv, buf, len))
+ break;
+ }
+
+ total_cnt -= len;
+ data_buf += len;
+ }
+ if (buf)
+ free(buf);
+
+ return total_cnt > 0 ? -1 : 0;
+}
+
+static int _ca_sflash_issue_cmd(struct ca_sflash_priv *priv,
+ struct spi_mem_op *op, u8 opcode)
+{
+ u8 dummy_cnt = op->dummy.nbytes;
+ u8 addr_cnt = op->addr.nbytes;
+ u8 mio_width;
+ unsigned int data_cnt = op->data.nbytes;
+ u64 addr_offset = op->addr.val;
+
+ /* Set the access register */
+ clrsetbits_le32(&priv->regs->ar,
+ GENMASK(31, 0), CA_SF_AR_ACCODE(opcode));
+
+ if (opcode == CA_SF_AC_OPCODE_EXTEND) { /* read_data, write_data */
+ if (data_cnt > 6) {
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ mio_width = priv->rx_width;
+ else
+ mio_width = priv->tx_width;
+ if (_ca_sflash_mio_set(priv, mio_width))
+ return -1;
+ }
+ debug("%s: FLASH ACCESS reg=%#08x\n",
+ __func__, readl(&priv->regs->ar));
+
+ /* Use command in extend_access register */
+ clrsetbits_le32(&priv->regs->ear,
+ GENMASK(31, 0), CA_SF_EAR_OPCODE(op->cmd.opcode)
+ | CA_SF_EAR_DUMY_CNT(dummy_cnt * 8 - 1)
+ | CA_SF_EAR_ADDR_CNT(addr_cnt - 1)
+ | CA_SF_EAR_DATA_CNT(4 - 1)
+ | CA_SF_EAR_DRD_CMD_EN);
+ debug("%s: FLASH EXT ACCESS reg=%#08x\n",
+ __func__, readl(&priv->regs->ear));
+
+ if (_ca_sflash_access_data(priv, op))
+ return -1;
+ } else { /* reset_op, wr_enable, wr_disable */
+ setbits_le32(&priv->regs->ar,
+ CA_SF_AR_OPCODE(op->cmd.opcode));
+ debug("%s: FLASH ACCESS reg=%#08x\n",
+ __func__, readl(&priv->regs->ar));
+
+ if (opcode == CA_SF_AC_OPCODE_4_ADDR) { /* erase_op */
+ /* Configure address length */
+ if (addr_cnt > 3) /* 4 Bytes address */
+ setbits_le32(&priv->regs->tr,
+ CA_FLASH_TR_SIZE(2));
+ else /* 3 Bytes address */
+ clrbits_le32(&priv->regs->tr,
+ CA_FLASH_TR_SIZE_MASK);
+
+ /* Fill address */
+ if (addr_cnt > 0)
+ clrsetbits_le32(&priv->regs->adr,
+ GENMASK(31, 0),
+ (u32)addr_offset);
+ }
+
+ if (_ca_sflash_wait_cmd(priv, RD_ACCESS))
+ return -1;
+ }
+ /* elapse 10us before issuing any other command */
+ udelay(10);
+
+ return 0;
+}
+
+static int ca_sflash_exec_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ struct ca_sflash_priv *priv = dev_get_priv(slave->dev->parent);
+ u8 opcode;
+
+ debug("%s: cmd:%#02x addr.val:%#llx addr.len:%#x data.len:%#x data.dir:%#x\n",
+ __func__, op->cmd.opcode, op->addr.val,
+ op->addr.nbytes, op->data.nbytes, op->data.dir);
+
+ if (op->data.nbytes == 0 && op->addr.nbytes == 0) {
+ opcode = CA_SF_AC_OPCODE;
+ } else if (op->data.nbytes == 0 && op->addr.nbytes > 0) {
+ opcode = CA_SF_AC_OPCODE_4_ADDR;
+ } else if (op->data.nbytes > 0) {
+ opcode = CA_SF_AC_OPCODE_EXTEND;
+ } else {
+ printf("%s: can't support cmd.opcode:(%#02x) type currently!\n",
+ __func__, op->cmd.opcode);
+ return -1;
+ }
+
+ return _ca_sflash_issue_cmd(priv, (struct spi_mem_op *)op, opcode);
+}
+
+static void ca_sflash_init(struct ca_sflash_priv *priv)
+{
+ /* Set FLASH_TYPE as serial flash, value: 0x0400*/
+ clrsetbits_le32(&priv->regs->tr,
+ GENMASK(31, 0), CA_FLASH_TR_SIZE(2));
+ debug("%s: FLASH_TYPE reg=%#x\n",
+ __func__, readl(&priv->regs->tr));
+
+ /* Minimize flash timing, value: 0x07010101 */
+ clrsetbits_le32(&priv->regs->tmr,
+ GENMASK(31, 0),
+ CA_SF_TMR_CLK(0x07)
+ | CA_SF_TMR_SETUP(0x01)
+ | CA_SF_TMR_HOLD(0x01)
+ | CA_SF_TMR_IDLE(0x01));
+ debug("%s: FLASH_TIMING reg=%#x\n",
+ __func__, readl(&priv->regs->tmr));
+}
+
+static int ca_sflash_probe(struct udevice *dev)
+{
+ struct ca_sflash_priv *priv = dev_get_priv(dev);
+ struct resource res;
+ int ret;
+
+ /* Map the registers */
+ ret = dev_read_resource_byname(dev, "sflash-regs", &res);
+ if (ret) {
+ dev_err(dev, "can't get regs base addresses(ret = %d)!\n", ret);
+ return ret;
+ }
+ priv->regs = devm_ioremap(dev, res.start, resource_size(&res));
+ if (IS_ERR(priv->regs))
+ return PTR_ERR(priv->regs);
+
+ ca_sflash_init(priv);
+
+ printf("SFLASH: Controller probed ready\n");
+ return 0;
+}
+
+static const struct spi_controller_mem_ops ca_sflash_mem_ops = {
+ .exec_op = ca_sflash_exec_op,
+};
+
+static const struct dm_spi_ops ca_sflash_ops = {
+ .claim_bus = ca_sflash_claim_bus,
+ .release_bus = ca_sflash_release_bus,
+ .set_speed = ca_sflash_set_speed,
+ .set_mode = ca_sflash_set_mode,
+ .mem_ops = &ca_sflash_mem_ops,
+};
+
+static const struct udevice_id ca_sflash_ids[] = {
+ {.compatible = "cortina,ca-sflash"},
+ {}
+};
+
+U_BOOT_DRIVER(ca_sflash) = {
+ .name = "ca_sflash",
+ .id = UCLASS_SPI,
+ .of_match = ca_sflash_ids,
+ .ops = &ca_sflash_ops,
+ .priv_auto_alloc_size = sizeof(struct ca_sflash_priv),
+ .probe = ca_sflash_probe,
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 8/8] board: presidio-asic: Add SPI NOR support
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
` (6 preceding siblings ...)
2020-04-21 5:29 ` [PATCH v6 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller Alex Nemirovsky
@ 2020-04-21 5:29 ` Alex Nemirovsky
7 siblings, 0 replies; 13+ messages in thread
From: Alex Nemirovsky @ 2020-04-21 5:29 UTC (permalink / raw)
To: u-boot
Add SPI NOR support for Cortina Access
Presidio Engineering Board
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Vignesh R <vigneshr@ti.com>
---
Changes in v6: None
Changes in v5:
- NAND support removed from presidio-asic board DT.
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/dts/ca-presidio-engboard.dts | 6 +--
board/cortina/presidio-asic/presidio.c | 16 ++++++-
configs/cortina_presidio-asic-spi-nand_defconfig | 48 +++++++++++++++++++
configs/cortina_presidio-asic-spi-nor_defconfig | 59 ++++++++++++++++++++++++
4 files changed, 124 insertions(+), 5 deletions(-)
create mode 100644 configs/cortina_presidio-asic-spi-nand_defconfig
create mode 100644 configs/cortina_presidio-asic-spi-nor_defconfig
diff --git a/arch/arm/dts/ca-presidio-engboard.dts b/arch/arm/dts/ca-presidio-engboard.dts
index eef433e..cc7c888 100644
--- a/arch/arm/dts/ca-presidio-engboard.dts
+++ b/arch/arm/dts/ca-presidio-engboard.dts
@@ -53,15 +53,13 @@
};
sflash: sflash-controller at f4324000 {
- #address-cells = <2>;
- #size-cells = <1>;
compatible = "cortina,ca-sflash";
reg = <0x0 0xf4324000 0x50>;
reg-names = "sflash-regs";
flash at 0 {
compatible = "jedec,spi-nor";
- spi-rx-bus-width = <1>;
- spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
};
};
diff --git a/board/cortina/presidio-asic/presidio.c b/board/cortina/presidio-asic/presidio.c
index b4fa01f..d547b60 100644
--- a/board/cortina/presidio-asic/presidio.c
+++ b/board/cortina/presidio-asic/presidio.c
@@ -14,7 +14,7 @@
#include <asm/psci.h>
#include <cpu_func.h>
#include <asm/armv8/mmu.h>
-
+#include <dm/uclass.h>
DECLARE_GLOBAL_DATA_PTR;
#define CA_PERIPH_BASE 0xE0000000UL
@@ -70,9 +70,23 @@ static noinline int invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,
return function_id;
}
+#ifdef CONFIG_CORTINA_SFLASH
+static int init_sflash(void)
+{
+ struct udevice *dev;
+
+ uclass_first_device(UCLASS_SPI, &dev);
+
+ return 0;
+}
+#endif
+
int board_early_init_r(void)
{
dcache_disable();
+#ifdef CONFIG_CORTINA_SFLASH
+ init_sflash();
+#endif
return 0;
}
diff --git a/configs/cortina_presidio-asic-spi-nand_defconfig b/configs/cortina_presidio-asic-spi-nand_defconfig
new file mode 100644
index 0000000..515ad22
--- /dev/null
+++ b/configs/cortina_presidio-asic-spi-nand_defconfig
@@ -0,0 +1,48 @@
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=7
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CA=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_CORTINA=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CORTINA_SFLASH=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y
diff --git a/configs/cortina_presidio-asic-spi-nor_defconfig b/configs/cortina_presidio-asic-spi-nor_defconfig
new file mode 100644
index 0000000..d7ecec3
--- /dev/null
+++ b/configs/cortina_presidio-asic-spi-nor_defconfig
@@ -0,0 +1,59 @@
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CA=y
+CONFIG_LED=y
+CONFIG_LED_CORTINA=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_CORTINA=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CORTINA_SFLASH=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 3/8] i2c: i2c-cortina: added CAxxxx I2C support
2020-04-21 5:29 ` [PATCH v6 3/8] i2c: i2c-cortina: added CAxxxx I2C support Alex Nemirovsky
@ 2020-04-21 5:46 ` Heiko Schocher
0 siblings, 0 replies; 13+ messages in thread
From: Heiko Schocher @ 2020-04-21 5:46 UTC (permalink / raw)
To: u-boot
Hello Alex,
Am 21.04.2020 um 07:29 schrieb Alex Nemirovsky:
> From: Arthur Li <arthur.li@cortina-access.com>
>
> Add I2C controller support for Cortina Access CAxxxx SoCs
>
> Signed-off-by: Arthur Li <arthur.li@cortina-access.com>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
> CC: Heiko Schocher <hs@denx.de>
>
> CA_I2C: DT binding for I2C controller
>
> DT binding document for Cortina I2C driver
>
> ---
>
> Changes in v6:
> - Add I2C DT binding document
Thanks!
>
> Changes in v5: None
> Changes in v4:
> - Utilize standard I2C macros from <i2c.h>
> - Return ETIMEDOUT in funcs that can timeout
> - Return i2c_xfer_init() result to caller of i2c_read() if it
> fails within i2c_read() execution
> - Fix misc. style guide conformance issues
> - Use printf() to report i2c_xfer() runtime errors
> instead of debug()
>
> Changes in v3: None
> Changes in v2: None
>
> MAINTAINERS | 4 +
> doc/device-tree-bindings/i2c/i2c-cortina.txt | 18 ++
> drivers/i2c/Kconfig | 7 +
> drivers/i2c/Makefile | 1 +
> drivers/i2c/i2c-cortina.c | 346 +++++++++++++++++++++++++++
> drivers/i2c/i2c-cortina.h | 84 +++++++
> 6 files changed, 460 insertions(+)
> create mode 100644 doc/device-tree-bindings/i2c/i2c-cortina.txt
> create mode 100644 drivers/i2c/i2c-cortina.c
> create mode 100644 drivers/i2c/i2c-cortina.h
Reviewed-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v6 4/8] board: presidio-asic: Add I2C support
2020-04-21 5:29 ` [PATCH v6 4/8] board: presidio-asic: Add " Alex Nemirovsky
@ 2020-04-21 5:47 ` Heiko Schocher
0 siblings, 0 replies; 13+ messages in thread
From: Heiko Schocher @ 2020-04-21 5:47 UTC (permalink / raw)
To: u-boot
Hello Alex,
Am 21.04.2020 um 07:29 schrieb Alex Nemirovsky:
> Add I2C board support for Cortina Access Presidio Engineering Board
>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
> CC: Heiko Schocher <hs@denx.de>
> ---
>
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> configs/cortina_presidio-asic-emmc_defconfig | 3 +++
> 1 file changed, 3 insertions(+)
Reviewed-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v6 6/8] board: presidio: add LED support
2020-04-21 5:29 ` [PATCH v6 6/8] board: presidio: add " Alex Nemirovsky
@ 2020-04-21 17:36 ` Simon Glass
0 siblings, 0 replies; 13+ messages in thread
From: Simon Glass @ 2020-04-21 17:36 UTC (permalink / raw)
To: u-boot
Hi Alex,
On Mon, 20 Apr 2020 at 23:30, Alex Nemirovsky
<alex.nemirovsky@cortina-access.com> wrote:
>
> From: Jway Lin <jway.lin@cortina-access.com>
>
> Add LED support for Cortina Access Presidio Engineering Board
>
> Signed-off-by: Jway Lin <jway.lin@cortina-access.com>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
>
> CC: Simon Glass <sjg@chromium.org>
>
> ---
>
> Changes in v6: None
> Changes in v5: None
> Changes in v4:
> - rename DT blink rate symbol
>
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/dts/ca-presidio-engboard.dts | 31 ++++++++++++++++++++++++++++
> configs/cortina_presidio-asic-emmc_defconfig | 2 ++
> 2 files changed, 33 insertions(+)
>
Do you have a new binding file for this from Linux? It seems to use
properties which I don't see in the existing binding in U-Boot.
> diff --git a/arch/arm/dts/ca-presidio-engboard.dts b/arch/arm/dts/ca-presidio-engboard.dts
> index 40c93d7..eef433e 100644
> --- a/arch/arm/dts/ca-presidio-engboard.dts
> +++ b/arch/arm/dts/ca-presidio-engboard.dts
> @@ -64,4 +64,35 @@
> spi-max-frequency = <108000000>;
> };
> };
> +
> + leds: led-controller at f43200f0 {
> + compatible = "cortina,ca-leds";
> + reg = <0x0 0xf43200f0 0x40>;
> +
> + cortina,blink-rate1 = <256>;
> + cortina,blink-rate2 = <512>;
> +
> + led at 0 {
> + pin = <0>;
> + active-low;
> + blink-sel =<0>;
> + port = <0>;
> + off-event = <0>;
> + label = "led0";
> + };
> +
> + led at 1 {
> + pin = <1>;
> + active-low;
> + blink-sel =<1>;
> + label = "led1";
> + };
> +
> + led at 2 {
> + pin = <2>;
> + active-low;
> + label = "led2";
> + };
> +
> + };
> };
Regards,
Simon
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v6 5/8] led: led_cortina: Add CAxxx LED support
2020-04-21 5:29 ` [PATCH v6 5/8] led: led_cortina: Add CAxxx LED support Alex Nemirovsky
@ 2020-04-21 17:37 ` Simon Glass
0 siblings, 0 replies; 13+ messages in thread
From: Simon Glass @ 2020-04-21 17:37 UTC (permalink / raw)
To: u-boot
Hi Alex,
On Mon, 20 Apr 2020 at 23:30, Alex Nemirovsky
<alex.nemirovsky@cortina-access.com> wrote:
>
> From: Jway Lin <jway.lin@cortina-access.com>
>
> Add Cortina Access LED controller support for CAxxxx SOCs
>
> Signed-off-by: Jway Lin <jway.lin@cortina-access.com>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
> CC: Simon Glass <sjg@chromium.org>
>
> ---
>
> Changes in v6: None
> Changes in v5: None
> Changes in v4:
> - remove unused macros
> - remove cortina prefix from macros
> - remove use BSS variable
> - further cleanup to meet code style guidelines
> - add additinal struct comments
> - rename DT blink rate symbol
>
> Changes in v3: None
> Changes in v2: None
>
> MAINTAINERS | 2 +
> drivers/led/Kconfig | 8 ++
> drivers/led/Makefile | 1 +
> drivers/led/led_cortina.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 279 insertions(+)
> create mode 100644 drivers/led/led_cortina.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 307e620..e9b6bfa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -183,6 +183,7 @@ F: drivers/serial/serial_cortina.c
> F: drivers/mmc/ca_dw_mmc.c
> F: drivers/i2c/i2c-cortina.c
> F: drivers/i2c/i2c-cortina.h
> +F: drivers/led/led_cortina.c
>
> ARM/CZ.NIC TURRIS MOX SUPPORT
> M: Marek Behun <marek.behun@nic.cz>
> @@ -724,6 +725,7 @@ F: drivers/serial/serial_cortina.c
> F: drivers/mmc/ca_dw_mmc.c
> F: drivers/i2c/i2c-cortina.c
> F: drivers/i2c/i2c-cortina.h
> +F: drivers/led/led_cortina.c
>
> MIPS MSCC
> M: Gregory CLEMENT <gregory.clement@bootlin.com>
> diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
> index 6675934..cc87fbf 100644
> --- a/drivers/led/Kconfig
> +++ b/drivers/led/Kconfig
> @@ -35,6 +35,14 @@ config LED_BCM6858
> This option enables support for LEDs connected to the BCM6858
> HW has blinking capabilities and up to 32 LEDs can be controlled.
>
> +config LED_CORTINA
> + bool "LED Support for Cortina Access CAxxxx SoCs"
> + depends on LED && (CORTINA_PLATFORM)
> + help
> + This option enables support for LEDs connected to the Cortina
> + Access CAxxxx SOCs.
> +
> +
> config LED_BLINK
> bool "Support LED blinking"
> depends on LED
> diff --git a/drivers/led/Makefile b/drivers/led/Makefile
> index 3654dd3..8e3ae7f 100644
> --- a/drivers/led/Makefile
> +++ b/drivers/led/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_LED_BCM6328) += led_bcm6328.o
> obj-$(CONFIG_LED_BCM6358) += led_bcm6358.o
> obj-$(CONFIG_LED_BCM6858) += led_bcm6858.o
> obj-$(CONFIG_$(SPL_)LED_GPIO) += led_gpio.o
> +obj-$(CONFIG_LED_CORTINA) += led_cortina.o
> diff --git a/drivers/led/led_cortina.c b/drivers/led/led_cortina.c
> new file mode 100644
> index 0000000..f873d30
> --- /dev/null
> +++ b/drivers/led/led_cortina.c
> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +/*
> + * Copyright (C) 2020 Cortina-Access
> + * Author: Jway Lin <jway.lin@cortina-access.com>
> + *
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <led.h>
> +#include <asm/io.h>
> +#include <dm/lists.h>
> +
> +#define LED_MAX_HW_BLINK 127
> +#define LED_MAX_COUNT 16
> +
> +/* LED_CONTROL fields */
> +#define LED_BLINK_RATE1_OFFSET 0
> +#define LED_BLINK_RATE1_MASK 0xff
> +#define LED_BLINK_RATE2_OFFSET 8
Suggestion: I would call that a SHIFT rather than an offset.
> +#define LED_BLINK_RATE2_MASK 0xff
> +#define LED_CLK_TEST BIT(16)
> +#define LED_CLK_POLARITY BIT(17)
> +#define LED_CLK_TEST_MODE BIT(16)
> +#define LED_CLK_TEST_RX_TEST BIT(30)
> +#define LED_CLK_TEST_TX_TEST BIT(31)
> +
> +/* LED_CONFIG fields */
> +#define LED_EVENT_ON_OFFSET 0
> +#define LED_EVENT_ON_MASK 0x7
> +#define LED_EVENT_BLINK_OFFSET 3
> +#define LED_EVENT_BLINK_MASK 0x7
> +#define LED_EVENT_OFF_OFFSET 6
> +#define LED_EVENT_OFF_MASK 0x7
> +#define LED_OFF_ON_OFFSET 9
> +#define LED_OFF_ON_MASK 0x3
> +#define LED_PORT_OFFSET 11
> +#define LED_PORT_MASK 0x7
> +#define LED_OFF_VAL BIT(14)
> +#define LED_SW_EVENT BIT(15)
> +#define LED_BLINK_SEL BIT(16)
> +
> +/* LED_CONFIG structures */
> +struct cortina_led_cfg {
struct cortina_led_priv
> + void __iomem *regs;
> + int idx;
comment?
> + bool active_low;
> + int off_event; /* set led off event */
> + int blink_event; /* set led blink event */
> + int on_event; /* set led on event */
> + int port; /* corresponding ethernet port */
> + int blink; /* blink rate sel */
> +};
> +
> +static void cortina_led_write(void __iomem *reg, unsigned long data)
> +{
> + writel(data, reg);
> +}
> +
> +static unsigned long cortina_led_read(void __iomem *reg)
> +{
> + return readl(reg);
> +}
> +
> +static enum led_state_t cortina_led_get_state(struct udevice *dev)
> +{
> + struct cortina_led_cfg *priv = dev_get_priv(dev);
> + enum led_state_t state = LEDST_OFF;
> + u32 val;
> +
> + val = readl(priv->regs);
> +
> + if (val & LED_SW_EVENT)
> + state = LEDST_ON;
> +
> + return state;
> +}
> +
> +static int cortina_led_set_state(struct udevice *dev, enum led_state_t state)
> +{
> + u32 val;
> + struct cortina_led_cfg *priv = dev_get_priv(dev);
> +
> + val = readl(priv->regs);
> +
> + switch (state) {
> + case LEDST_OFF:
> + val &= ~LED_SW_EVENT;
> + val &= ~(LED_OFF_ON_MASK << LED_OFF_ON_OFFSET);
Those two lines look like they could move above the switch()
> + val |= 0x3 << LED_OFF_ON_OFFSET;
Perhaps 3 (and the 1 below) should be in an enum since you are using
ones for everything else?
> + cortina_led_write(priv->regs, val);
> + break;
> + case LEDST_ON:
> + val |= LED_SW_EVENT;
> + val &= ~(LED_OFF_ON_MASK << LED_OFF_ON_OFFSET);
> + val |= 0x1 << LED_OFF_ON_OFFSET;
> + cortina_led_write(priv->regs, val);
that line looks like it could be below the switch.
> + break;
> + case LEDST_TOGGLE:
> + if (cortina_led_get_state(dev) == LEDST_OFF)
> + return cortina_led_set_state(dev, LEDST_ON);
> + else
> + return cortina_led_set_state(dev, LEDST_OFF);
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct led_ops cortina_led_ops = {
> + .get_state = cortina_led_get_state,
> + .set_state = cortina_led_set_state,
> +};
> +
> +static int cortina_led_probe(struct udevice *dev)
> +{
> + struct led_uc_plat *uc_plat = dev_get_uclass_platdata(dev);
Reading the DT should really happen in the ofdata_to_platdata method.
> +
> + /* Top-level LED node */
> + if (!uc_plat->label) {
> + void __iomem *regs;
> + u32 reg_value, val;
> + u16 rate1, rate2;
> +
> + regs = dev_remap_addr(dev);
> + if (!regs)
> + return -EINVAL;
> +
> + reg_value = 0;
> + reg_value |= LED_CLK_POLARITY;
> +
> + rate1 = dev_read_u32_default(dev, "cortina,blink-rate1", 256);
> + rate2 = dev_read_u32_default(dev, "cortina,blink-rate2", 512);
> +
If you put these into your platdata then you can have a probe() method
which just talks to the hardware, not also reading DT.
> + val = rate1 / 16 - 1;
> + rate1 = val > LED_MAX_HW_BLINK ?
> + LED_MAX_HW_BLINK : val;
> + reg_value |= (rate1 & LED_BLINK_RATE1_MASK) <<
> + LED_BLINK_RATE1_OFFSET;
> +
> + val = rate2 / 16 - 1;
> + rate2 = val > LED_MAX_HW_BLINK ?
> + LED_MAX_HW_BLINK : val;
> + reg_value |= (rate2 & LED_BLINK_RATE2_MASK) <<
> + LED_BLINK_RATE2_OFFSET;
> +
> + cortina_led_write(regs, reg_value);
That call belongs in probe() though.
> +
> + } else {
> + struct cortina_led_cfg *priv = dev_get_priv(dev);
> + void __iomem *regs;
> + u32 pin, val, blink, port, off_event, blink_event, on_event;
> +
> + regs = dev_remap_addr(dev_get_parent(dev));
> + if (!regs)
> + return -EINVAL;
> +
> + pin = dev_read_u32_default(dev, "pin", LED_MAX_COUNT);
> +
> + if (pin >= LED_MAX_COUNT)
> + return -EINVAL;
> +
> + priv->regs = regs + 4 + pin * 4;
> +
> + val = cortina_led_read(priv->regs);
> +
> + if (dev_read_bool(dev, "active-low")) {
> + priv->active_low = true;
> + val |= LED_OFF_VAL;
> + } else {
> + priv->active_low = false;
> + val &= ~LED_OFF_VAL;
> + }
> +
> + blink = dev_read_u32_default(dev, "blink-sel", 0);
> +
> + if (blink == 0) {
> + priv->blink = 0;
> + val &= ~LED_BLINK_SEL;
> + } else if (blink == 1) {
> + priv->blink = 1;
> + val |= LED_BLINK_SEL;
> + }
> +
> + off_event = dev_read_u32_default(dev, "off-event", 3);
> + val &= ~(LED_EVENT_OFF_MASK << LED_EVENT_OFF_OFFSET);
> + if (off_event != 3) {
> + priv->off_event = off_event;
> + val |= BIT(off_event) << LED_EVENT_OFF_OFFSET;
> + }
> +
> + blink_event = dev_read_u32_default(dev, "blink-event", 3);
> + val &= ~(LED_EVENT_BLINK_MASK << LED_EVENT_BLINK_OFFSET);
> + if (blink_event != 3) {
> + priv->blink_event = blink_event;
> + val |= BIT(blink_event) << LED_EVENT_BLINK_OFFSET;
> + }
> +
> + on_event = dev_read_u32_default(dev, "on-event", 3);
> + val &= ~(LED_EVENT_ON_MASK << LED_EVENT_ON_OFFSET);
> + if (on_event != 3) {
> + priv->on_event = on_event;
> + val |= BIT(on_event) << LED_EVENT_ON_OFFSET;
> + }
> +
> + port = dev_read_u32_default(dev, "port", 0);
> + priv->port = port;
> + val &= ~(LED_PORT_MASK << LED_PORT_OFFSET);
> + val |= port << LED_PORT_OFFSET;
> +
> + /* force off */
> + val &= ~(LED_OFF_ON_MASK << LED_OFF_ON_OFFSET);
> + val |= 0x3 << LED_OFF_ON_OFFSET;
> +
> + cortina_led_write(priv->regs, val);
> + }
> +
> + return 0;
> +}
> +
> +static int cortina_led_bind(struct udevice *parent)
> +{
> + ofnode node;
> +
> + dev_for_each_subnode(node, parent) {
> + struct led_uc_plat *uc_plat;
> + struct udevice *dev;
> + const char *label;
> + int ret;
> +
> + label = ofnode_read_string(node, "label");
> + if (!label) {
> + debug("%s: node %s has no label\n", __func__,
> + ofnode_get_name(node));
> + return -EINVAL;
> + }
> +
> + ret = device_bind_driver_to_node(parent, "ca-leds",
> + ofnode_get_name(node),
> + node, &dev);
If you have your own binding, could you add a compatible string for
the child nodes so that DM can bind drivers automatically?
> + if (ret)
> + return ret;
> + uc_plat = dev_get_uclass_platdata(dev);
> + uc_plat->label = label;
> + }
> +
> + return 0;
> +}
> +
> +static const struct udevice_id ca_led_ids[] = {
> + { .compatible = "cortina,ca-leds" },
> + { /* sentinel */ }
> +};
> +
> +U_BOOT_DRIVER(cortina_led) = {
> + .name = "ca-leds",
> + .id = UCLASS_LED,
> + .of_match = ca_led_ids,
> + .bind = cortina_led_bind,
> + .probe = cortina_led_probe,
> + .priv_auto_alloc_size = sizeof(struct cortina_led_cfg),
> + .ops = &cortina_led_ops,
> +};
> --
> 2.7.4
>
Regards,
Simon
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2020-04-21 17:37 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-04-21 5:29 [PATCH v6 0/8] Cortina Access Drivers Package 2 Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 1/8] mmc: ca_dw_mmc: Misc cleanup of driver Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 2/8] board: presidio-asic: update eMMC DT informatino Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 3/8] i2c: i2c-cortina: added CAxxxx I2C support Alex Nemirovsky
2020-04-21 5:46 ` Heiko Schocher
2020-04-21 5:29 ` [PATCH v6 4/8] board: presidio-asic: Add " Alex Nemirovsky
2020-04-21 5:47 ` Heiko Schocher
2020-04-21 5:29 ` [PATCH v6 5/8] led: led_cortina: Add CAxxx LED support Alex Nemirovsky
2020-04-21 17:37 ` Simon Glass
2020-04-21 5:29 ` [PATCH v6 6/8] board: presidio: add " Alex Nemirovsky
2020-04-21 17:36 ` Simon Glass
2020-04-21 5:29 ` [PATCH v6 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller Alex Nemirovsky
2020-04-21 5:29 ` [PATCH v6 8/8] board: presidio-asic: Add SPI NOR support Alex Nemirovsky
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox