From: dillon.minfei at gmail.com <dillon.minfei@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v5 0/7] Add rt-thread art-pi board support
Date: Fri, 9 Apr 2021 15:28:39 +0800 [thread overview]
Message-ID: <1617953326-3110-1-git-send-email-dillon.minfei@gmail.com> (raw)
From: dillon min <dillon.minfei@gmail.com>
These patches aim to adds u-boot support on art-pi board.
the board resources:
- stm32h750xbh6 128k flash, 1024k sram
- 32MiB sdram
- 16MiB spi flash
- 8MiB qspi flash
- onboard wifi, bt, fm
the detail board information can be found at:
https://art-pi.gitee.io/website/
---
changes in v5:
- remove "for STMicroelectronics." from Author(s) description
changes in v4:
- sync with kernel side device tree submit
- use strlcpy in stm32_sdram.c
- update CONFIG_BOOTARGS, remove rdinit=/linuxrc, to use kernel's devtmpfs
- remove unused st,stm32h750-pinctrl from patch v3
changes in v3:
two mirror changes in [PATCH v3 2/6], others same to version 2
- remove "for STMicroelectronics." from arch/arm/dts/stm32h750-pinctrl.dtsi
- correct misspelling parameters
you can found detail patch v2 information at link:
https://patchwork.ozlabs.org/project/uboot/list/?series=236009
changes in v2:
- fix wrong author/date in previous submit
- sync with kernel device tree files
- add st,stm32h750-pinctrl in doc and pinctrl driver
*** BLURB HERE ***
dillon min (7):
ARM: dts: stm32: split sdram pin & timing parameter into specific
board dts
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
ARM: dts: stm32: add new instances for stm32h743 MCU
ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1
register
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
ram: stm32: fix strsep failed on read only memory
board: Add rt-thread art-pi board support
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/stm32h7-pinctrl.dtsi | 274 ++++++++++++++++++++++++
arch/arm/dts/stm32h7-u-boot.dtsi | 100 +--------
arch/arm/dts/stm32h743-pinctrl.dtsi | 306 ---------------------------
arch/arm/dts/stm32h743.dtsi | 178 +++++++++++++++-
arch/arm/dts/stm32h743i-disco-u-boot.dtsi | 98 +++++++++
arch/arm/dts/stm32h743i-disco.dts | 2 +-
arch/arm/dts/stm32h743i-eval-u-boot.dtsi | 98 +++++++++
arch/arm/dts/stm32h743i-eval.dts | 2 +-
arch/arm/dts/stm32h750.dtsi | 5 +
arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi | 81 +++++++
arch/arm/dts/stm32h750i-art-pi.dts | 188 ++++++++++++++++
arch/arm/mach-stm32/stm32h7/Kconfig | 4 +
board/st/stm32h750-art-pi/Kconfig | 19 ++
board/st/stm32h750-art-pi/MAINTAINERS | 7 +
board/st/stm32h750-art-pi/Makefile | 6 +
board/st/stm32h750-art-pi/stm32h750-art-pi.c | 58 +++++
configs/stm32h750-art-pi_defconfig | 51 +++++
drivers/ram/stm32_sdram.c | 3 +
include/configs/stm32h750-art-pi.h | 48 +++++
include/dt-bindings/memory/stm32-sdram.h | 2 +
21 files changed, 1126 insertions(+), 407 deletions(-)
create mode 100644 arch/arm/dts/stm32h7-pinctrl.dtsi
delete mode 100644 arch/arm/dts/stm32h743-pinctrl.dtsi
create mode 100644 arch/arm/dts/stm32h750.dtsi
create mode 100644 arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32h750i-art-pi.dts
create mode 100644 board/st/stm32h750-art-pi/Kconfig
create mode 100644 board/st/stm32h750-art-pi/MAINTAINERS
create mode 100644 board/st/stm32h750-art-pi/Makefile
create mode 100644 board/st/stm32h750-art-pi/stm32h750-art-pi.c
create mode 100644 configs/stm32h750-art-pi_defconfig
create mode 100644 include/configs/stm32h750-art-pi.h
--
2.7.4
next reply other threads:[~2021-04-09 7:28 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-09 7:28 dillon.minfei at gmail.com [this message]
2021-04-09 7:28 ` [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts dillon.minfei at gmail.com
2021-04-09 9:46 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 7/7] board: Add rt-thread art-pi board support dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617953326-3110-1-git-send-email-dillon.minfei@gmail.com \
--to=dillon.minfei@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox