public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: dillon.minfei at gmail.com <dillon.minfei@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU
Date: Fri,  9 Apr 2021 15:28:42 +0800	[thread overview]
Message-ID: <1617953326-3110-4-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1617953326-3110-1-git-send-email-dillon.minfei@gmail.com>

From: dillon min <dillon.minfei@gmail.com>

Some instances are missing in current support of stm32h743 MCU. This commit
adds usart3/uart4 and sdmmc2 support.

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
v5: no changes

 arch/arm/dts/stm32h743.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
index 8c96698..77a8aef 100644
--- a/arch/arm/dts/stm32h743.dtsi
+++ b/arch/arm/dts/stm32h743.dtsi
@@ -99,6 +99,22 @@
 			clocks = <&rcc USART2_CK>;
 		};
 
+		usart3: serial at 40004800 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			status = "disabled";
+			clocks = <&rcc USART3_CK>;
+		};
+
+		uart4: serial at 40004c00 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			status = "disabled";
+			clocks = <&rcc UART4_CK>;
+		};
+
 		i2c1: i2c at 40005400 {
 			compatible = "st,stm32f7-i2c";
 			#address-cells = <1>;
@@ -332,6 +348,20 @@
 			max-frequency = <120000000>;
 		};
 
+		sdmmc2: sdmmc at 48022400 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x48022400 0x400>;
+			interrupts = <124>;
+			interrupt-names	= "cmd_irq";
+			clocks = <&rcc SDMMC2_CK>;
+			clock-names = "apb_pclk";
+			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+		};
+
 		exti: interrupt-controller at 58000000 {
 			compatible = "st,stm32h7-exti";
 			interrupt-controller;
-- 
2.7.4

  parent reply	other threads:[~2021-04-09  7:28 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-09  7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
2021-04-09  7:28 ` [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts dillon.minfei at gmail.com
2021-04-09  9:46   ` Patrice CHOTARD
2021-04-09  7:28 ` [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei at gmail.com
2021-04-09  9:47   ` Patrice CHOTARD
2021-04-09  7:28 ` dillon.minfei at gmail.com [this message]
2021-04-09  9:47   ` [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU Patrice CHOTARD
2021-04-09  7:28 ` [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register dillon.minfei at gmail.com
2021-04-09  9:47   ` Patrice CHOTARD
2021-04-09  7:28 ` [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei at gmail.com
2021-04-09  9:47   ` Patrice CHOTARD
2021-04-09  7:28 ` [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory dillon.minfei at gmail.com
2021-04-09  9:47   ` Patrice CHOTARD
2021-04-09  7:28 ` [PATCH v5 7/7] board: Add rt-thread art-pi board support dillon.minfei at gmail.com
2021-04-09  9:47   ` Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1617953326-3110-4-git-send-email-dillon.minfei@gmail.com \
    --to=dillon.minfei@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox