* [U-Boot] How to backup the working u-boot image from the flash image.
@ 2008-12-01 6:43 Mohamed Thalib .H
2008-12-01 7:03 ` Daniel Mack
0 siblings, 1 reply; 3+ messages in thread
From: Mohamed Thalib .H @ 2008-12-01 6:43 UTC (permalink / raw)
To: u-boot
Hi all,
Since I dont have the source code of u-boot image which is prgrammed in
the board. I want to know how can I back up the working u-boot present
in the flash and store it in a file in my system before flashing the new
u-boot. so the working image can used to restore the board to working
condition at any time.
--
Regards,
Mohamed Thalib .H
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] How to backup the working u-boot image from the flash image.
2008-12-01 6:43 [U-Boot] How to backup the working u-boot image from the flash image Mohamed Thalib .H
@ 2008-12-01 7:03 ` Daniel Mack
2008-12-01 7:38 ` Mohamed Thalib .H
0 siblings, 1 reply; 3+ messages in thread
From: Daniel Mack @ 2008-12-01 7:03 UTC (permalink / raw)
To: u-boot
Hi,
On Mon, Dec 01, 2008 at 12:13:28PM +0530, Mohamed Thalib .H wrote:
> Since I dont have the source code of u-boot image which is prgrammed in
> the board. I want to know how can I back up the working u-boot present
> in the flash and store it in a file in my system before flashing the new
> u-boot. so the working image can used to restore the board to working
> condition at any time.
Where did you get the board with the binary from? As U-Boot is GPL'ized
free software, you have the right to get the sources from anyone who
handed out the binary to you. It's not a matter of courtesy but an
obligation.
Best regards,
Daniel
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] How to backup the working u-boot image from the flash image.
2008-12-01 7:03 ` Daniel Mack
@ 2008-12-01 7:38 ` Mohamed Thalib .H
0 siblings, 0 replies; 3+ messages in thread
From: Mohamed Thalib .H @ 2008-12-01 7:38 UTC (permalink / raw)
To: u-boot
On Mon, 2008-12-01 at 08:03 +0100, Daniel Mack wrote:
> Hi,
>
> On Mon, Dec 01, 2008 at 12:13:28PM +0530, Mohamed Thalib .H wrote:
> > Since I dont have the source code of u-boot image which is prgrammed in
> > the board. I want to know how can I back up the working u-boot present
> > in the flash and store it in a file in my system before flashing the new
> > u-boot. so the working image can used to restore the board to working
> > condition at any time.
>
> Where did you get the board with the binary from? As U-Boot is GPL'ized
> free software, you have the right to get the sources from anyone who
> handed out the binary to you. It's not a matter of courtesy but an
> obligation.
>
> Best regards,
> Daniel
The board is a custom one. the uboot was ported by someone else .. the
modified source code is not currently avilable.
--
Regards,
Mohamed Thalib .H
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-12-01 7:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-12-01 6:43 [U-Boot] How to backup the working u-boot image from the flash image Mohamed Thalib .H
2008-12-01 7:03 ` Daniel Mack
2008-12-01 7:38 ` Mohamed Thalib .H
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox