* [U-Boot] unable to see jffs2 partition
@ 2009-07-23 21:57 E Robertson
2009-07-23 21:58 ` E Robertson
0 siblings, 1 reply; 2+ messages in thread
From: E Robertson @ 2009-07-23 21:57 UTC (permalink / raw)
To: u-boot
Hi all,
I've been trying unsuccessfully to see my jffs2 partition I've created by the
mtdtools under linux. If their a known issue with this? Is their a size limit?
Maybe the way it's created? I do not have a problem with this partition from
linux but also never looked at it from the u-boot.
I can change partitions but "ls" shows partition is empty when their are files.
...
#define CONFIG_CMD_JFFS2 1 /** JFFS2 Support */
#define CONFIG_CMD_MTDPARTS 1
#define CONFIG_JFFS2_CMDLINE 1
#undef CONFIG_CMD_FLASH
#define CONFIG_JFFS2_NAND 1
#define CONFIG_JFFS2_DEV "nand0"
#define CONFIG_JFFS2_PART_OFFSET 0x0
#define CONFIG_JFFS2_PART_SIZE 0x5000000
#define MTDPARTS_DEFAULT "mtdparts=nand:80M(IMGS),-(DATA)"
#define MTDIDS_DEFAULT "nand0=nand"
...
Thanks,
E!
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] unable to see jffs2 partition
2009-07-23 21:57 [U-Boot] unable to see jffs2 partition E Robertson
@ 2009-07-23 21:58 ` E Robertson
0 siblings, 0 replies; 2+ messages in thread
From: E Robertson @ 2009-07-23 21:58 UTC (permalink / raw)
To: u-boot
On Thursday 23 July 2009 04:57:19 pm E Robertson wrote:
> Hi all,
> I've been trying unsuccessfully to see my jffs2 partition I've created by
> the mtdtools under linux. If their a known issue with this? Is their a size
> limit? Maybe the way it's created? I do not have a problem with this
> partition from linux but also never looked at it from the u-boot.
> I can change partitions but "ls" shows partition is empty when their are
> files.
>
> ...
> #define CONFIG_CMD_JFFS2 1 /** JFFS2 Support */
> #define CONFIG_CMD_MTDPARTS 1
> #define CONFIG_JFFS2_CMDLINE 1
> #undef CONFIG_CMD_FLASH
> #define CONFIG_JFFS2_NAND 1
> #define CONFIG_JFFS2_DEV "nand0"
> #define CONFIG_JFFS2_PART_OFFSET 0x0
> #define CONFIG_JFFS2_PART_SIZE 0x5000000
> #define MTDPARTS_DEFAULT "mtdparts=nand:80M(IMGS),-(DATA)"
> #define MTDIDS_DEFAULT "nand0=nand"
> ...
>
> Thanks,
> E!
Forget to add I'm using 03.09 git source on SAM9263 SoC.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-07-23 21:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-23 21:57 [U-Boot] unable to see jffs2 partition E Robertson
2009-07-23 21:58 ` E Robertson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox