* [U-Boot] macro substitution - can someone explain please
@ 2009-10-23 12:25 David Collier
2009-10-26 7:44 ` javier Martin
2009-10-26 8:13 ` Mike Frysinger
0 siblings, 2 replies; 4+ messages in thread
From: David Collier @ 2009-10-23 12:25 UTC (permalink / raw)
To: u-boot
If I put the following line in my board.h file
#define CONFIG_RAMBOOTCOMMAND \
"ping ${serverip} && tftp && bootm ${fileaddr}"
then when I do PRINTENV I see
ramboot=ping ${serverip} && tftp && bootm 0x10400000
so clearly at some point the text ${fileaddr} has been substituted,
whereas ${serverip} hasn't
If I retype the line at the command prompt, the ${fileaddr} appears as I
wished, so it must be happening diring compile and so on.
Can anyone explain, and/or can anyone tell me how to get the effect I
wanted.
David Collier
www.dexdyne.com
^ permalink raw reply [flat|nested] 4+ messages in thread* [U-Boot] macro substitution - can someone explain please 2009-10-23 12:25 [U-Boot] macro substitution - can someone explain please David Collier @ 2009-10-26 7:44 ` javier Martin 2009-10-26 8:11 ` Mike Frysinger 2009-10-26 8:13 ` Mike Frysinger 1 sibling, 1 reply; 4+ messages in thread From: javier Martin @ 2009-10-26 7:44 UTC (permalink / raw) To: u-boot I have a similar problem. In my environment: bootcmd=cp.b c0040000 ${loadaddr} 280000;bootm ${loadaddr} mtdparts=mtdparts=mxc_nor_flash.0:256k(U-Boot),2560k(kernel),29312k(rootfs),512k(config),128k(env1) bootargs=noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 init=linuxrc rw ${mtdparts} But when I execute 'run bootm', kernel boots but "mtdparts" variable is not substituted in kernel command line: Uncompressing Linux.............................................................................................................. done, booting the kernel. [ 0.000000] Linux version 2.6.22.6-gb5e710ce-dirty (javier at acuario) (gcc version 4.1.2) #219 PREEMPT Fri Oct 23 18:12:58 CEST 2009 [ 0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177 [ 0.000000] Machine: Freescale i.MX27ADS [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Built 1 zonelists. Total pages: 16256 [ 0.000000] Kernel command line: noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 init=linuxrc rw ${mtdparts} As stated in README file, global variables should be able to be accessed through ${ } symbols. Is this also valid inside "bootargs" variable? -- Javier Martin Vista Silicon S.L. CDTUC - FASE C - Oficina S-345 Avda de los Castros s/n 39005- Santander. Cantabria. Spain +34 942 25 32 60 www.vista-silicon.com ^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] macro substitution - can someone explain please 2009-10-26 7:44 ` javier Martin @ 2009-10-26 8:11 ` Mike Frysinger 0 siblings, 0 replies; 4+ messages in thread From: Mike Frysinger @ 2009-10-26 8:11 UTC (permalink / raw) To: u-boot On Monday 26 October 2009 03:44:41 javier Martin wrote: > I have a similar problem. In my environment: > > bootcmd=cp.b c0040000 ${loadaddr} 280000;bootm ${loadaddr} > mtdparts=mtdparts=mxc_nor_flash.0:256k(U-Boot),2560k(kernel),29312k(rootfs) > ,512k(config),128k(env1) bootargs=noinitrd console=ttymxc0,115200 > root=/dev/mtdblock2 > init=linuxrc rw ${mtdparts} > > But when I execute 'run bootm', kernel boots but "mtdparts" variable > is not substituted in kernel command line: i dont think your issue is the same as David's. you need to force expansion of the variable yourself. set bootcmd "run do_args; run do_boot" set do_args "set init linuxrc rw ${mtdparts}" set do_boot "cp.b c0040000 ${loadaddr} 280000;bootm ${loadaddr}" -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20091026/f70df714/attachment.pgp ^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] macro substitution - can someone explain please 2009-10-23 12:25 [U-Boot] macro substitution - can someone explain please David Collier 2009-10-26 7:44 ` javier Martin @ 2009-10-26 8:13 ` Mike Frysinger 1 sibling, 0 replies; 4+ messages in thread From: Mike Frysinger @ 2009-10-26 8:13 UTC (permalink / raw) To: u-boot On Friday 23 October 2009 08:25:00 David Collier wrote: > If I put the following line in my board.h file > > #define CONFIG_RAMBOOTCOMMAND \ > "ping ${serverip} && tftp && bootm ${fileaddr}" start with the binary. run `strings` on your u-boot.bin (or whatever you're using) and see what ramboot is set to. > then when I do PRINTENV I see > > ramboot=ping ${serverip} && tftp && bootm 0x10400000 > > so clearly at some point the text ${fileaddr} has been substituted, > whereas ${serverip} hasn't > > If I retype the line at the command prompt, the ${fileaddr} appears as I > wished, so it must be happening diring compile and so on. i doubt variable expansion is happening during compile. it isnt like gcc knows how to expand shell variables in C code. -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20091026/b142f35c/attachment.pgp ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-10-26 8:13 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-10-23 12:25 [U-Boot] macro substitution - can someone explain please David Collier 2009-10-26 7:44 ` javier Martin 2009-10-26 8:11 ` Mike Frysinger 2009-10-26 8:13 ` Mike Frysinger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox