[U-Boot] [PATCH] Adding support for Linuxstamp II 9260

[U-Boot] [PATCH] Adding support for Linuxstamp II 9260

[Paul Thomas]

From: Paul Thomas <pthomas@black.(none)>

---
 Makefile                                       |    3 +
 board/linuxstamp/at91sam9260ls/Makefile        |   56 ++++++
 board/linuxstamp/at91sam9260ls/at91sam9260ls.c |  203 +++++++++++++++++++++
 board/linuxstamp/at91sam9260ls/config.mk       |    1 +
 board/linuxstamp/at91sam9260ls/led.c           |   41 +++++
 board/linuxstamp/at91sam9260ls/partition.c     |   40 +++++
 include/configs/at91sam9260ls.h                |  223 ++++++++++++++++++++++++
 7 files changed, 567 insertions(+), 0 deletions(-)
 create mode 100644 board/linuxstamp/at91sam9260ls/Makefile
 create mode 100644 board/linuxstamp/at91sam9260ls/at91sam9260ls.c
 create mode 100644 board/linuxstamp/at91sam9260ls/config.mk
 create mode 100644 board/linuxstamp/at91sam9260ls/led.c
 create mode 100644 board/linuxstamp/at91sam9260ls/partition.c
 create mode 100644 include/configs/at91sam9260ls.h

diff --git a/Makefile b/Makefile
index bcb3fe9..d8efa66 100644
--- a/Makefile
+++ b/Makefile
@@ -2761,6 +2761,9 @@ at91sam9g20ek_config	:	unconfig
 	fi;
 	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
 
+at91sam9260ls_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ls linuxstamp at91 
+
 at91sam9xeek_nandflash_config \
 at91sam9xeek_dataflash_cs0_config \
 at91sam9xeek_dataflash_cs1_config \
diff --git a/board/linuxstamp/at91sam9260ls/Makefile b/board/linuxstamp/at91sam9260ls/Makefile
new file mode 100644
index 0000000..2a0ef78
--- /dev/null
+++ b/board/linuxstamp/at91sam9260ls/Makefile
@@ -0,0 +1,56 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= at91sam9260ls.o
+COBJS-y	+= led.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/linuxstamp/at91sam9260ls/at91sam9260ls.c b/board/linuxstamp/at91sam9260ls/at91sam9260ls.c
new file mode 100644
index 0000000..a1c4466
--- /dev/null
+++ b/board/linuxstamp/at91sam9260ls/at91sam9260ls.c
@@ -0,0 +1,203 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2009
+ * Paul Thomas <pthomas8589@gmail.com>
+ * http://opencircuits.com/Linuxstamp_II_9260
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9260ls_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(2));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91sam9260ls_macb_hw_init(void)
+{
+	unsigned long rstc;
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
+
+	/*
+	 * Disable pull-up on:
+	 *	RXDV (PA17) => PHY normal mode (not Test mode)
+	 *	ERX0 (PA14) => PHY ADDR0
+	 *	ERX1 (PA15) => PHY ADDR1
+	 *	ERX2 (PA25) => PHY ADDR2
+	 *	ERX3 (PA26) => PHY ADDR3
+	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	writel(pin_to_mask(AT91_PIN_PA14) |
+	       pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA17) |
+	       pin_to_mask(AT91_PIN_PA25) |
+	       pin_to_mask(AT91_PIN_PA26) |
+	       pin_to_mask(AT91_PIN_PA28),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+
+	rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (AT91_RSTC_ERSTL & (0x0D << 8)) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+	/* Restore NRST value */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (rstc) |
+				     AT91_RSTC_URSTEN);
+
+	/* Re-enable pull-up */
+	writel(pin_to_mask(AT91_PIN_PA14) |
+	       pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA17) |
+	       pin_to_mask(AT91_PIN_PA25) |
+	       pin_to_mask(AT91_PIN_PA26) |
+	       pin_to_mask(AT91_PIN_PA28),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+	at91_macb_hw_init();
+}
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+#ifdef CONFIG_AT91SAM9G20EK
+	/* arch number of AT91SAM9260EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
+#else
+	/* arch number of AT91SAM9260EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
+#endif
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9260ls_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init((1 << 0) | (1 << 1));
+#endif
+#ifdef CONFIG_MACB
+	at91sam9260ls_macb_hw_init();
+#endif
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/linuxstamp/at91sam9260ls/config.mk b/board/linuxstamp/at91sam9260ls/config.mk
new file mode 100644
index 0000000..9ce161e
--- /dev/null
+++ b/board/linuxstamp/at91sam9260ls/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x21f00000
diff --git a/board/linuxstamp/at91sam9260ls/led.c b/board/linuxstamp/at91sam9260ls/led.c
new file mode 100644
index 0000000..2424d27
--- /dev/null
+++ b/board/linuxstamp/at91sam9260ls/led.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
+
+	at91_set_gpio_output(CONFIG_RED_LED, 1);
+	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+
+	at91_set_gpio_value(CONFIG_RED_LED, 0);
+	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+}
diff --git a/board/linuxstamp/at91sam9260ls/partition.c b/board/linuxstamp/at91sam9260ls/partition.c
new file mode 100644
index 0000000..2629c67
--- /dev/null
+++ b/board/linuxstamp/at91sam9260ls/partition.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
+	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
+	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
+};
diff --git a/include/configs/at91sam9260ls.h b/include/configs/at91sam9260ls.h
new file mode 100644
index 0000000..ba823ea
--- /dev/null
+++ b/include/configs/at91sam9260ls.h
@@ -0,0 +1,223 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2009
+ * Paul Thomas <pthomas8589@gmail.com>
+ * http://opencircuits.com/Linuxstamp_II_9260
+ *
+ * Configuation settings for the Linuxstamp II 9260 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
+#define CONFIG_SYS_HZ		1000
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+
+#define CONFIG_AT91SAM9260	1	/* It's an Atmel AT91SAM9260 SoC*/
+#define CONFIG_AT91SAM9260EK	1	/* This in needed in places like the macb setup in at91sam9260_devices*/
+
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PA9	/* this is the power led */
+#define	CONFIG_GREEN_LED	AT91_PIN_PA6	/* this is the user led */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x02000000	/* 32 megs */
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH		1
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
+#define AT91_SPI_CLK			15000000
+
+#ifdef CONFIG_AT91SAM9G20EK
+#define DATAFLASH_TCSS			(0x22 << 16)
+#else
+#define DATAFLASH_TCSS			(0x1a << 16)
+#endif
+#define DATAFLASH_TCHS			(0x1 << 24)
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+#endif
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH			1
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#undef CONFIG_RMII
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_RESET_PHY_R		1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+#define CONFIG_CMD_FAT			1
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x21e00000
+
+#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=atmel_nand:-(root) "		\
+				"rw rootfstype=jffs2"
+
+#elif CONFIG_SYS_USE_DATAFLASH_CS1
+
+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=atmel_nand:-(root) "		\
+				"rw rootfstype=jffs2"
+
+#else /* CONFIG_SYS_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock5 "			\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
+				"256k(uboot)ro,128k(env1)ro,"		\
+				"128k(env2)ro,2M(linux),-(root) "	\
+				"rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
-- 
1.6.2.5

[U-Boot] [PATCH] Adding support for Linuxstamp II 9260

[Mike Frysinger]

On Tuesday 03 November 2009 16:12:40 Paul Thomas wrote:
> From: Paul Thomas <pthomas@black.(none)>

looks like you need to fix your git environment & re-submit this patch
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20091103/54f8f475/attachment.pgp 

[U-Boot] [PATCH] Adding support for Linuxstamp II 9260

[Paul Thomas]

On Tue, Nov 3, 2009 at 2:21 PM, Mike Frysinger <vapier@gentoo.org> wrote:
> On Tuesday 03 November 2009 16:12:40 Paul Thomas wrote:
>> From: Paul Thomas <pthomas@black.(none)>
>
> looks like you need to fix your git environment & re-submit this patch
> -mike
>

Mike,

Yeah, I saw it does that in git send-email, but the first prompt "Who
should the emails appear to be from?" is correct, and the email in the
.gitconfig is correct. I don't know where's it's pulling that info
from or why it's different from the prompt. It's very annoying.

thanks,
Paul

[U-Boot] [PATCH] Adding support for Linuxstamp II 9260

[Wolfgang Denk]

Dear Paul Thomas,

please check/fix your mail addresses.

In message <1257282760-18005-1-git-send-email-pthomas8589@gmail.com> you wrote:
> From: Paul Thomas <pthomas@black.(none)>

Signed-off-by: line is missing.

> ---
>  Makefile                                       |    3 +
>  board/linuxstamp/at91sam9260ls/Makefile        |   56 ++++++
>  board/linuxstamp/at91sam9260ls/at91sam9260ls.c |  203 +++++++++++++++++++++
>  board/linuxstamp/at91sam9260ls/config.mk       |    1 +
>  board/linuxstamp/at91sam9260ls/led.c           |   41 +++++
>  board/linuxstamp/at91sam9260ls/partition.c     |   40 +++++
>  include/configs/at91sam9260ls.h                |  223 ++++++++++++++++++++++++
>  7 files changed, 567 insertions(+), 0 deletions(-)
>  create mode 100644 board/linuxstamp/at91sam9260ls/Makefile
>  create mode 100644 board/linuxstamp/at91sam9260ls/at91sam9260ls.c
>  create mode 100644 board/linuxstamp/at91sam9260ls/config.mk
>  create mode 100644 board/linuxstamp/at91sam9260ls/led.c
>  create mode 100644 board/linuxstamp/at91sam9260ls/partition.c
>  create mode 100644 include/configs/at91sam9260ls.h

Entries to MAKEALL an MAINTAINERS are missing.

> diff --git a/Makefile b/Makefile
> index bcb3fe9..d8efa66 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -2761,6 +2761,9 @@ at91sam9g20ek_config	:	unconfig
>  	fi;
>  	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
>  
> +at91sam9260ls_config	:	unconfig
> +	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ls linuxstamp at91 

When the board name is Linuxstamp, and the board directory name is
linuxstamp, then the board config file name and make target name
should be linuxstamp, too.

>  at91sam9xeek_nandflash_config \
>  at91sam9xeek_dataflash_cs0_config \
>  at91sam9xeek_dataflash_cs1_config \
> diff --git a/board/linuxstamp/at91sam9260ls/Makefile b/board/linuxstamp/at91sam9260ls/Makefile
> new file mode 100644
> index 0000000..2a0ef78
> --- /dev/null
> +++ b/board/linuxstamp/at91sam9260ls/Makefile
> @@ -0,0 +1,56 @@
> +#
> +# (C) Copyright 2003-2008
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# (C) Copyright 2008
> +# Stelian Pop <stelian.pop@leadtechdesign.com>
> +# Lead Tech Design <www.leadtechdesign.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).a
> +
> +COBJS-y	+= at91sam9260ls.o
> +COBJS-y	+= led.o
> +COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
> +
> +SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS-y))
> +SOBJS	:= $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
> +	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
> +
> +clean:
> +	rm -f $(SOBJS) $(OBJS)
> +
> +distclean:	clean
> +	rm -f $(LIB) core *.bak $(obj).depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/linuxstamp/at91sam9260ls/at91sam9260ls.c b/board/linuxstamp/at91sam9260ls/at91sam9260ls.c
> new file mode 100644
> index 0000000..a1c4466
> --- /dev/null
> +++ b/board/linuxstamp/at91sam9260ls/at91sam9260ls.c
> @@ -0,0 +1,203 @@
> +/*
> + * (C) Copyright 2007-2008
> + * Stelian Pop <stelian.pop@leadtechdesign.com>
> + * Lead Tech Design <www.leadtechdesign.com>
> + *
> + * (C) Copyright 2009
> + * Paul Thomas <pthomas8589@gmail.com>
> + * http://opencircuits.com/Linuxstamp_II_9260
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/arch/at91sam9260.h>
> +#include <asm/arch/at91sam9260_matrix.h>
> +#include <asm/arch/at91sam9_smc.h>
> +#include <asm/arch/at91_common.h>
> +#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/at91_rstc.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/io.h>
> +#include <asm/arch/hardware.h>
> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
> +#include <net.h>
> +#endif
> +#include <netdev.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* ------------------------------------------------------------------------- */
> +/*
> + * Miscelaneous platform dependent initialisations
> + */
> +
> +#ifdef CONFIG_CMD_NAND
> +static void at91sam9260ls_nand_hw_init(void)
> +{
> +	unsigned long csa;
> +
> +	/* Enable CS3 */
> +	csa = at91_sys_read(AT91_MATRIX_EBICSA);
> +	at91_sys_write(AT91_MATRIX_EBICSA,
> +		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
> +
> +	/* Configure SMC CS3 for NAND/SmartMedia */
> +	at91_sys_write(AT91_SMC_SETUP(3),
> +		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
> +		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
> +	at91_sys_write(AT91_SMC_PULSE(3),
> +		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
> +		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
> +	at91_sys_write(AT91_SMC_CYCLE(3),
> +		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
> +	at91_sys_write(AT91_SMC_MODE(3),
> +		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
> +		       AT91_SMC_EXNWMODE_DISABLE |
> +#ifdef CONFIG_SYS_NAND_DBW_16
> +		       AT91_SMC_DBW_16 |
> +#else /* CONFIG_SYS_NAND_DBW_8 */
> +		       AT91_SMC_DBW_8 |
> +#endif
> +		       AT91_SMC_TDF_(2));

Argh... AT91 "style" again. we should really clean up all this mess
one day...

...
> +#ifdef CONFIG_AT91SAM9G20EK
> +	/* arch number of AT91SAM9260EK-Board */
> +	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
> +#else
> +	/* arch number of AT91SAM9260EK-Board */
> +	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
> +#endif

This seems to be wrong. Should this not be something like
MACH_TYPE_STAMP9G20 instead?

> +#ifdef CONFIG_RESET_PHY_R
> +void reset_phy(void)
> +{
> +#ifdef CONFIG_MACB
> +	/*
> +	 * Initialize ethernet HW addr prior to starting Linux,
> +	 * needed for nfsroot
> +	 */
> +	eth_init(gd->bd);
> +#endif
> +}

NAK. Please fix your Linux drivers instead. See
http://www.denx.de/wiki/view/DULG/EthernetDoesNotWorkInLinux


> diff --git a/include/configs/at91sam9260ls.h b/include/configs/at91sam9260ls.h
> new file mode 100644
> index 0000000..ba823ea
> --- /dev/null
> +++ b/include/configs/at91sam9260ls.h

see above for choice of file name.

> +#define CONFIG_AT91SAM9260	1	/* It's an Atmel AT91SAM9260 SoC*/
> +#define CONFIG_AT91SAM9260EK	1	/* This in needed in places like the macb setup in at91sam9260_devices*/

This is most certainly NOT a AT91SAM9260EK board, right?

> +#define CONFIG_ARCH_CPU_INIT
> +#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/

Don't undef what is not defined anyway.

> +#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
> +#define CONFIG_SETUP_MEMORY_TAGS 1
> +#define CONFIG_INITRD_TAG	1
> +
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#define CONFIG_SKIP_RELOCATE_UBOOT
> +
> +/*
> + * Hardware drivers
> + */
> +#define CONFIG_ATMEL_USART	1
> +#undef CONFIG_USART0
> +#undef CONFIG_USART1
> +#undef CONFIG_USART2

Ditto.

> +#include <config_cmd_default.h>
> +#undef CONFIG_CMD_BDI
> +#undef CONFIG_CMD_FPGA
> +#undef CONFIG_CMD_IMI
> +#undef CONFIG_CMD_IMLS
> +#undef CONFIG_CMD_LOADS
> +#undef CONFIG_CMD_SOURCE

Is there any specific reason for disabling lots of pretty useful
commands? Are you so tight on flash memory or RAM?

> +#ifdef CONFIG_AT91SAM9G20EK

AT91SAM9G20EK ? 

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A Puritan is someone who is deathly afraid that  someone,  somewhere,
is having fun.

[U-Boot] [PATCH] Adding support for Linuxstamp II 9260

[Mike Frysinger]

On Tuesday 03 November 2009 16:26:17 Paul Thomas wrote:
> On Tue, Nov 3, 2009 at 2:21 PM, Mike Frysinger <vapier@gentoo.org> wrote:
> > On Tuesday 03 November 2009 16:12:40 Paul Thomas wrote:
> >> From: Paul Thomas <pthomas@black.(none)>
> >
> > looks like you need to fix your git environment & re-submit this patch
> 
> Yeah, I saw it does that in git send-email, but the first prompt "Who
> should the emails appear to be from?" is correct, and the email in the
> .gitconfig is correct. I don't know where's it's pulling that info
> from or why it's different from the prompt. It's very annoying.

it's most likely encoded in the patch itself.  the git-send-email question 
only asks about the From: field, not the author aspect.

make sure your ~/.gitconfig is correct and has user.name and user.email set, 
then amend the patch (assuming it's the last changeset in your branch) by 
doing:
git commit --amend --author 'Your Name <your@email.com>'

that should reset all the relevant fields
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20091103/a366ff88/attachment.pgp 

[U-Boot] [PATCH] Adding support for Linuxstamp II 9260

[Paul Thomas]

>> +#ifdef CONFIG_RESET_PHY_R
>> +void reset_phy(void)
>> +{
>> +#ifdef CONFIG_MACB
>> + ? ? /*
>> + ? ? ?* Initialize ethernet HW addr prior to starting Linux,
>> + ? ? ?* needed for nfsroot
>> + ? ? ?*/
>> + ? ? eth_init(gd->bd);
>> +#endif
>> +}
>
> NAK. Please fix your Linux drivers instead. See
> http://www.denx.de/wiki/view/DULG/EthernetDoesNotWorkInLinux
>

This is just what's in at91sam9260ek. If I comment it out it doesn't
even compile. It looks like reset_phy is called from lib_arm/board.c.
Is there another 9260 board that does the "right" thing here?

thanks,
Paul