[U-Boot] [PATCH] Add support for the MPC5121e USB Host controller.

[Wolfgang Denk <wd@denx.de>]

Dear Damien Dusha,

In message <1282455714-12834-1-git-send-email-d.dusha@gmail.com> you wrote:
> Add support for the USB Host controller of the MPC5121e, based on the original patch by Francesco Rendine [1].
> 
> The patch configures the USB Host controller and the on-board UTMI phy, including the Freescale-specific registers as per the Linux kernel driver.
> 
> Tested on the MPC5121ADS platform with various USB mass storage devices.
> 
> [1] http://lists.denx.de/pipermail/u-boot/2009-June/055022.html
> 
> Signed-off-by: Damien Dusha <d.dusha@gmail.com>
> ---
>  arch/powerpc/include/asm/immap_512x.h   |    4 +
>  board/freescale/mpc5121ads/mpc5121ads.c |    4 +-
>  drivers/usb/host/ehci-fsl.c             |  137 ++++++++++++++++++++++++++++-
>  drivers/usb/host/ehci.h                 |    5 +
>  include/configs/mpc5121ads.h            |   22 +++++-
>  include/usb/ehci-fsl.h                  |  149 +++++++++++++++++++++++++------
>  6 files changed, 292 insertions(+), 29 deletions(-)

Sorry for the late response.

I have to admit that I really dislike the big "#ifndef CONFIG_MPC512X"
in drivers/usb/host/ehci-fsl.c - it covers basicly all of the existing
code, and adds an alternative implementation for MPC512x.  I think
this should better be handled in a separate driver.

Patch following.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The ultimate barrier is one's viewpoint.
                        - Terry Pratchett, _The Dark Side of the Sun_