From: Luka Perkov <uboot@lukaperkov.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] uboot for zyxel nsa320
Date: Sat, 14 Jul 2012 20:47:40 +0200 [thread overview]
Message-ID: <20120714184740.GA10324@w500.lan> (raw)
In-Reply-To: <alpine.DEB.2.00.1207140445530.2374@tehzcl2.tehzcl-arg>
Hi kqt4at5v,
On Sat, Jul 14, 2012 at 04:51:13AM -0500, kqt4at5v at gmail.com wrote:
> NSA320>> printenv
> bootargs=console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init
> bootcmd=nand read.e 0x2000000 $(kernel_addr) 0xA00000; bootm 0x2000000
> bootdelay=2
> baudrate=115200
> loads_echo=0
> eth1addr=00:19:CB:00:51:82
> ipaddr=10.4.50.165
> serverip=10.4.50.5
> rootpath=/mnt/ARM_FS/
> netmask=255.255.255.0
> nandEcc=1bit
> MODEL_ID=DD01
> PRODUCT_NAME=NSA-320
> FEATURE_BIT=00
> CONTRY_TYPE=FF
> VENDOR_NAME=ZyXEL Communications Corp.
This is not from official uboot.
Either your kernel that you are trying to boot is is not good or you did
not set serial output correctly.
Luka
next prev parent reply other threads:[~2012-07-14 18:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-13 17:43 [U-Boot] uboot for zyxel nsa320 kqt4at5v at gmail.com
2012-07-13 23:20 ` Luka Perkov
2012-07-14 9:51 ` kqt4at5v at gmail.com
2012-07-14 18:47 ` Luka Perkov [this message]
2012-07-14 18:53 ` kqt4at5v at gmail.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120714184740.GA10324@w500.lan \
--to=uboot@lukaperkov.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox