[U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x

[Lars Poeschel <poeschel@lemonage.de>]

Hello Wolfgang,

thank you for your fast review!

On Tuesday 08 January 2013 at 19:58:37, Wolfgang Denk wrote:

> > +/* DDR RAM defines */
> > +#define DDR_CLK_MHZ		303
> 
> Is this really correct?  303 ??

I am quite sure, I read this in a datasheet, but I can not find it anymore. I 
set this to 333 now. mtest still works.

...

> Do you plan to use this?  Otherwise please just omit such dead code.
> 
> > +#ifdef CONFIG_DRIVER_TI_CPSW
> > +static void cpsw_control(int enabled)
> > +{
> > +	/* VTP can be added here */
> > +
> > +	return;
> > +}
> 
> Ditto...

The cpsw driver needs a control function, otherwise the board crashes when 
network initializes. On my board this is empty like on am335x_evm.
 
> > +#define CONFIG_ENV_OVERWRITE		1
> 
> Please do not define values for logical variables like this one;
> please fix globally.

Fix globally ? Do you mean, I have to fix that for EVERY board that is in u-
boot, that defines CONFIG_ENV_OVERWRITE with a value to get my patch in? 
There are a number of boards doing this wrong!

> > +#define CONFIG_ENV_IS_NOWHERE
> 
> Really?

Uuhm. Yes. At the moment I use this uEnv.txt file on sd-card, as I am not 
able to use the NAND yet. The env should go to nand later.

Thanks for the other hints you gave. I will address this and send a version 2 
soon.

Regards,
Lars