From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Mon, 18 Mar 2013 13:06:06 -0400 [thread overview]
Message-ID: <20130318170606.GA25919@bill-the-cat> (raw)
In-Reply-To: <20130315230112.14998ce0@lilith>
On Fri, Mar 15, 2013 at 11:01:12PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> Here is a PR for ARM. Note that doc/README.scrapyard will need a manual
> merge resolution due to ARM tree having a commit that reorders the
> headers and reformats the lines while mainline has a commit adding two
> new entries still in the older format.
>
> The following changes since commit
> fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4:
>
> x86: Enable CONFIG_OF_CONTROL on coreboot (2013-03-04 15:57:52 -0800)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to b27673ccbd3d5435319b5c09c3e7061f559f925d:
>
> Merge branch 'u-boot-tegra/master' into
> 'u-boot-arm/master' (2013-03-15 20:50:43 +0100)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (9):
> Merge 'u-boot-microblaze/mainline/arm' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> arm: omap: map u_boot_lists section to .sram
> Remove linker lists (LGAs) from SPL linker scripts
> arm: make __bss_start and __bss_end__ compiler-generated
> Refactor linker-generated arrays
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
>
> Beno??t Th??baudeau (6):
> imx: mx6q DDR3 init: Fix tMRD
> imx: mx6q DDR3 init: Fix tXPR
> imx: mx6q DDR3 init: Fix SDE_to_RST
> imx: mx6q DDR3 init: Fix RST_to_CKE
> imx: mx6q DDR3 init: Fix MR0.PPD
> imx: mx6q DDR3 init: Benefit from available CL = 7
>
> Bo Shen (3):
> ARM: atmel: add at91sam9g20ek_2mmc nand boot support
> ARM: at91: change nand flash table
> ARM: at91sam9x5: Using CPU string directly
>
> Chase Maupin (3):
> am335x_evm: Add NAND environment variables
> am335x_evm: Add SPI environment variables
> am335x_evm: Add NET environment variables
>
> Enric Balletbo i Serra (7):
> OMAP3: igep00x0: use official board names.
> OMAP3: igep00x0: add missing include mach-types.h
> OMAP3: igep00x0: Add new IGEP COM PROTON.
> SPL: ONENAND: Fix some ONENAND related defines.
> SPL: ONENAND: Fix onenand_spl_load_image implementation.
> SPL: ONENAND: Support SPL to boot u-boot from OneNAND.
> OMAP3: Initialize gpmc if SPL_ONENAND_SUPPORT is enabled.
>
> Eric Nelson (8):
> i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
> i.MX6: mx6qsabrelite: indent with tabs
> i.MX6: consolidate pad names for multi-CPU boards
> i.MX6: crm_regs: define CCM_CCGRx for use in board config files
> i.MX6: crm_regs: define IOMUXC_GPR4/6/7
> i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
> i.MX6: Add DDR controller registers
> Add Boundary Devices Nitrogen6X boards
>
> Fabio Estevam (6):
> mx6: Disable Power Down Bit of watchdog
> mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
> mx23evk: Turn on caches
> common: cmd_sata: Fix usage text for 'sata init'
> mx6: Provide a structure for accessing HDMI registers
> nitrogen6x: Fix RAM size variable
>
> Fadil Berisha (2):
> mxs: timrot: Add support to i.MX23
> mxs: timrot: Rename local macros
>
> Howard Gray (1):
> omap3: mvblx: change console to ttyO0 and make silent by default.
>
> Ilya Yanok (4):
> spl: support for booting via usbeth
> am33xx: support for booting via usbeth
> am335x_evm: enable support for booting via USB
> doc/SPL/README.am335x-network: Document using ethernet (and USB)
> SPL
>
> Jesse Gilles (1):
> ARM: sam9x5: fix ethernet pins in MII mode
>
> Lars Poeschel (1):
> am33xx: pcm051: Remove wp pin mux for sd-card
>
> Lokesh Vutla (13):
> ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register
> ARM: OMAP4+: Cleanup emif specific files
> ARM: OMAP4+: Make control module register structure generic
> ARM: OMAP5: Clean up iosettings code
> ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs
> ARM: OMAP5: srcomp: enable slew rate compensation cells after
> powerup arm: dra7xx: clock: Add the prcm changes
> arm: dra7xx: clock: Add the dplls data
> arm: dra7xx: Add control module changes
> arm: dra7xx: Add DDR related data for DRA752 ES1.0
> arm: dra7xx: Add board files for DRA7XX socs
> arm: dra7xx: Add dra7xx_evm build support
> arm: dra7xx: Add silicon id support for DRA752 soc
>
> Lucas Stach (7):
> tegra: usb: set USB_PORTS_MAX to correct value
> tegra: usb: make controller init functions more self contained
> tegra: usb: remove unneeded function parameter
> tegra: usb: move controller init into start_port
> tegra: usb: various small cleanups
> tegra: usb: move implementation into right directory
> tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
>
> Marek Vasut (7):
> mxs: Reset the EMI block on mx23
> mxs: mmc: spi: dma: Better wrap the MXS differences
> mxs: spi: Fix the MXS SPI for mx23
> mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
> mxs: Squash the header file usage in ehci-mxs
> mxs: Make ehci-mxs multiport capable
> mxs: m28: Enable power to USB port 0
>
> Mark Jackson (1):
> Allow AM33xx boards to setup GPMC chipselects.
>
> Michael Jones (2):
> omap3: mvblx: select fpgafilename according to orientation
> omap3: mvblx: pass FPGA version to the kernel
>
> Michal Simek (3):
> xilinx: zynq: Enable DCC and create new zynq_dcc board
> arm: zynq: Add SLCR support with system reset
> arm: zynq: Add lowlevel initialization to C
>
> Mugunthan V N (1):
> am335x: cpsw: optimize cpsw_send to increase network performance
>
> Nicolas Ferre (2):
> arm: at91/configs: add libfdt to configuration
> arm: at91/configs: add bootz to configuration
>
> Nikita Kiryanov (14):
> omap: consolidate common mmc definitions
> omap_hsmmc: fix out of bounds array access
> omap_hsmmc: introduce omap_hsmmc_data struct
> omap_hsmmc: implement driver check for card detection
> cm-t35: implement board specific card detect check
> mmc: add support for write protection
> omap_hsmmc: add driver check for write protection
> omap3: add useful dss defines
> omap3: allow dynamic selection of gfx_format
> lcd: add option for board specific splash screen preparation
> cm-t35: add support for dvi displays
> cm-t35: add support for user defined lcd parameters
> lcd: implement a callback for splashimage
> cm_t35: prevent splashimage from being set to a bad value
>
> Otavio Salvador (11):
> build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
> mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
> CONFIG_SPL_MXS_PSWITCH_WAIT mx23: Document the tRAS lockout setting in
> memory initialization mx23evk: Adjust DRAM control register to use full
> 128MB of RAM led: Use STATUS_LED_ON and STATUS_LED_OFF when calling
> __led_set mxs: Fix iomux.h to not break build during assembly stage
> mx23_olinuxino: Add support for status LED
> mx23evk: Enable USB support
> mx23_olinuxino: Enable USB support
> mx23_olinuxino: Add ethernet support
> mx23_olinuxino: Fix warning for implicit declaration
>
> SRICHARAN R (6):
> ARM: OMAP4+: Change the PRCM structure prototype common for all
> Socs ARM: OMAP4+: Cleanup the clocks layer
> ARM: OMAP4+: Clean up the pmic code
> ARM: OMAP5: Add silicon id support for ES2.0 revision.
> ARM: OMAP5: clock: Add the prcm register changes required for
> ES2.0 ARM: OMAP4/5: clocks: Add the required OPP settings as per the
> latest addendum
>
> Stefano Babic (3):
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> USB: drop unneeded header in ehci-mx6
>
> Stephen Warren (8):
> ARM: mx6: use common CPU errata config options
> ARM: implement some Cortex-A9 errata workarounds
> ARM: tegra: enable some CPU errata workarounds
> ARM: tegra: implement WAR for Tegra114 CPU reset vector
> ARM: tegra: make bounce buffer option common
> disk: define HAVE_BLOCK_DEVICE in a common place
> disk: define HAVE_BLOCK_DEVICE if CONFIG_CMD_PART
> ARM: tegra: enable a common set of disk-related commands
> everywhere
>
> Tom Rini (9):
> am335x evm: Add am335x_evm_spiboot target
> am335x_evm: Never set CONFIG_EXTRA_ENV_SETTINGS in SPL
> am335x_evm: Add am335x_evm_usbspl build target
> am33xx: Update DDR3 EMIF configuration sequence
> am335x_evm: Enable CONFIG_CMD_BOOTZ
> omap5_evm: Enable CONFIG_CMD_BOOTZ
> omap3_beagle: Enable CONFIG_CMD_BOOTZ
> omap4_common: Enable CONFIG_CMD_BOOTZ
> Merge u-boot/master into u-boot-ti/master
>
> Tom Warren (27):
> Tegra114: I2C: Take DVFS out of reset to allow I2C5 (PWR_I2C) to
> work Tegra: I2C: Add T114 clock support to tegra_i2c driver
> Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
> Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
> Tegra: fdt: Change /include/ to #include for C preprocessor
> Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux
> Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files
> Tegra: MMC: Add DT support to MMC driver for all T20 boards
> Tegra: fdt: Remove memreserve line from Cardhu/Seaboard DT files
> Tegra30: fdt: Sync DT nodes with kernel DT files (I2C, SPI, GPIO,
> clock) Tegra: Add twarren as maintainer for Tegra30 and Tegra114 SoCs
> Tegra: Remove unused CONFIG_SYS_CPU_OSC_FREQUENCY define
> Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO,
> tegra_car) Tegra30: Cardhu: Remove unneeded cardhu.c.mmc file
> Tegra114: pinmux: Update pinmux tables & code, fix a bug w/SDMMC3
> init Tegra30: Cardhu: Add pad config tables/code based on pinmux code
> Tegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards (Cardhu for
> now) Tegra: MMC: Added/update SDMMC registers/base addresses for T20/T30
> Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines
> mmc: Tegra: Add SD bus power/voltage function and MMC pad init
> call. Tegra30: mmc: Add Tegra30 SDMMC compatible entry to fdtdec &
> driver Tegra30: MMC: Enable DT MMC driver support for Tegra30 Cardhu
> boards Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry
> Tegra114: Fix/update GP padcfg register struct
> Tegra114: Dalmore: Always use DEFAULT instead of DISABLE for lock
> bits Tegra114: fdt: Move aliases from dtsi to dts file as per other
> Tegras Tegra114: Dalmore: Add pad config tables/code based on pinmux
> code
>
> Tomas Novotny (2):
> da8xx: ea20: Add the configuration define for the exact SoC
> variant da8xx: Add the missing pinmux for da830 to the gpio driver
>
> Wolfgang Denk (2):
> README.scrapyard: add missing commit IDs
> ARM: ns9750dev: remove remainders of dead board
>
> fabio.estevam at freescale.com (1):
> nitrogen: Use unsigned long to specify the total RAM size
>
> robertcnelson at gmail.com (2):
> beagle: expansion boards: retry i2c_read with 16bit addressing
> beagle: expansion boards: add LSR COM6L adapter
I've merged, but not pushed this, with the following merge commit (I
couldn't get a nice pretty print like last time):
To try and explain this since diff-diffs are funny:
- Consolidate around using __bss_end (so in a few new files, and a lot
of changed files, add __bss_end not __bssend__ or similar).
- Add hashes for PCIPPC2 / PCIPPC6 in scrapyard.
- In tegra20, both CONFIG_SYS_GENERIC_BOARD and CONFIG_BOUNCE_BUFFER are
set.
commit cf0d1242c87217ba0ce5ecb2f87dfcd1b40b7892
Merge: b5bec88 b27673c
Author: Tom Rini <trini@ti.com>
Date: Mon Mar 18 12:31:00 2013 -0400
Merge branch 'master' of git://git.denx.de/u-boot-arm
Albert's rework of the linker scripts conflicted with Simon's making
everyone use __bss_end. We also had a minor conflict over
README.scrapyard being added to in mainline and enhanced in
u-boot-arm/master with IDs for when stuff was removed.
Conflicts:
arch/arm/cpu/ixp/u-boot.lds
arch/arm/cpu/u-boot.lds
arch/arm/lib/Makefile
board/actux1/u-boot.lds
board/actux2/u-boot.lds
board/actux3/u-boot.lds
board/dvlhost/u-boot.lds
board/freescale/mx31ads/u-boot.lds
doc/README.scrapyard
include/configs/tegra-common.h
Build tested for all of ARM and run-time tested on am335x_evm.
Signed-off-by: Tom Rini <trini@ti.com>
diff --cc arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
index 0000000,69f6d48..b6a929f
mode 000000,100644..100644
--- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
@@@ -1,0 -1,67 +1,67 @@@
+ /*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+ MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+ OUTPUT_ARCH(arm)
+ ENTRY(_start)
+ SECTIONS
+ {
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text)
+ *(.text*)
+ } >.sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ } >.sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
- __bss_end__ = .;
++ __bss_end = .;
+ } >.sdram
+ }
diff --cc arch/arm/cpu/ixp/u-boot.lds
index 2c823e1,5e66dd1..8345b55
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@@ -67,11 -67,17 +67,17 @@@ SECTION
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.dynstr*) }
diff --cc arch/arm/cpu/u-boot-spl.lds
index 0000000,8321afb..3c0d99c
mode 000000,100644..100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@@ -1,0 -1,93 +1,93 @@@
+ /*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+ OUTPUT_ARCH(arm)
+ ENTRY(_start)
+ SECTIONS
+ {
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ __image_copy_start = .;
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+
+ . = .;
+
+ __image_copy_end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ _end = .;
+
+ /*
+ * Deprecated: this MMU section is used by pxa at present but
+ * should not be used by new boards/CPUs.
+ */
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
- __bss_end__ = .;
++ __bss_end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+ }
+
+ #if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
-ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
++ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+ #endif
diff --cc arch/arm/cpu/u-boot.lds
index b337e7b,d4ad352..3a1083d
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@@ -81,11 -81,17 +81,18 @@@ SECTION
*(.mmutable)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.dynstr*) }
diff --cc arch/arm/lib/Makefile
index 24c7e7a,11c2674..6ae161a
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@@ -39,10 -39,8 +39,11 @@@ GLCOBJS += div0.
SOBJS-y += crt0.o
ifndef CONFIG_SPL_BUILD
-COBJS-y += bss.o
+ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
+endif
++COBJS-y += bss.o
+
COBJS-y += bootm.o
COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o
diff --cc arch/arm/lib/bss.c
index 0000000,7c0b154..99eda59
mode 000000,100644..100644
--- a/arch/arm/lib/bss.c
+++ b/arch/arm/lib/bss.c
@@@ -1,0 -1,39 +1,39 @@@
+ /*
+ * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ /**
+ * These two symbols are declared in a C file so that the linker
+ * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one
+ * it would use if the symbols were defined in the linker file.
+ * Using only R_ARM_RELATIVE relocation ensures that references to
+ * the symbols are correct after as well as before relocation.
+ *
+ * We need a 0-byte-size type for these symbols, and the compiler
+ * does not allow defining objects of C type 'void'. Using an empty
+ * struct is allowed by the compiler, but causes gcc versions 4.4 and
+ * below to complain about aliasing. Therefore we use the next best
+ * thing: zero-sized arrays, which are both 0-byte-size and exempt from
+ * aliasing warnings.
+ */
+
+ char __bss_start[0] __attribute__((used, section(".__bss_start")));
-char __bss_end__[0] __attribute__((used, section(".__bss_end__")));
++char __bss_end[0] __attribute__((used, section(".__bss_end")));
diff --cc board/actux1/u-boot.lds
index a0d217b,7cf5b46..c76728a
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/actux2/u-boot.lds
index da2b4e2,e9b5547..984f70e
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/actux3/u-boot.lds
index f922033,b79ea3c..fc48cf0
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/dvlhost/u-boot.lds
index ed91003,eb83b6f..b13d3e1
--- a/board/dvlhost/u-boot.lds
+++ b/board/dvlhost/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/freescale/mx31ads/u-boot.lds
index 4d1858b,2d08fea..264c4e8
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@@ -80,11 -80,17 +80,17 @@@ SECTION
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
- *(.bss)
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
+ *(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.bss*) }
diff --cc doc/README.scrapyard
index 7d73ea0,e9ca96c..189b883
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@@ -9,85 -9,84 +9,86 @@@ maintain a list of such former fellows
easily if here is something they might want to dig for...
- Board Arch CPU removed Commit last known maintainer/contact
- =============================================================================
- AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de>
- c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de>
- ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
- IAD210 powerpc mpc860 - - -
- LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
- SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
- SX1 arm arm925t - -
- TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de>
- apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
- tb0229 mips mips32 3f3110d 2011-12-12
- rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
- OXC powerpc MPC8240 309a292 2011-12-07
- BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
- xm250 arm pxa c746cdd 2011-25-11
- pleb2 arm pxa b185a1c 2011-25-11
- cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
- cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
- mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
- ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
- ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
- zylonite arm pxa b66521a 2011-09-05
- shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
- modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
- lpc2292sodimm arm arm720t d1a067a 2011-09-05
- lart arm sa1100 3d57573 2011-09-05 Alex Z??pke <azu@sysgo.de>
- impa7 arm arm720t c1f8750 2011-09-05 Marius Gr??ger <mag@sysgo.de>
- gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
- evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
- ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr??ger <mag@sysgo.de>
- dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z??pke <azu@sysgo.de>
- SMN42 arm arm720t 6aac646 2011-09-05
- at91rm9200dk arm arm920t 1c85752 2011-07-17
- m501sk arm arm920t b1a2bd4 2011-07-17
- kb9202 arm arm920t 5bd3814 2011-07-17
- csb637 arm arm920t d14af08 2011-07-17
- cmc_pu2 arm arm920t 37a9b4d 2011-07-17
- at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
- voiceblue arm arm925t 1b793a4 2011-07-17
- smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
- sbc2410x arm arm920t 1f7f0ed 2011-07-17
- netstar arm arm925t 6ea2405 2011-07-17
- mx1fs2 arm arm920t 6962419 2011-07-17
- lpd7a404 arm lh7a40x 957731e 2011-07-17
- edb9301 arm arm920t 716f7ad 2011-07-17
- edb9302 arm arm920t 716f7ad 2011-07-17
- edb9302a arm arm920t 716f7ad 2011-07-17
- edb9307 arm arm920t 716f7ad 2011-07-17
- edb9307a arm arm920t 716f7ad 2011-07-17
- edb9312 arm arm920t 716f7ad 2011-07-17
- edb9315 arm arm920t 716f7ad 2011-07-17
- edb9315a arm arm920t 716f7ad 2011-07-17
- B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
- armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
- assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
- trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
- xsengine ARM PXA2xx 4262a7c 2010-10-20
- wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
- delta ARM PXA2xx 75e2035 2010-10-20
- mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
- barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
- ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
- VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
- NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
- CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
- logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
- CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
- PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
- spieval powerpc MPC5200 69434e4 2010-09-19
- smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
- HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
- GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
- AmigaOneG3SE 953b7e6 2010-06-23
- suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
- XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
- MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
- adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
- R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
- CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- PCIPPC2 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
+ Board Arch CPU Commit Removed Last known maintainer/contact
+ =================================================================================================
+ ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de>
+ AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ IAD210 powerpc mpc860 1b0757e 2012-10-28 -
+ LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de>
+ SX1 arm arm925t 53c4154 2012-10-26
+ TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de>
+ apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
+ tb0229 mips mips32 3f3110d 2011-12-12
+ rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
+ OXC powerpc MPC8240 309a292 2011-12-07
+ BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
+ xm250 arm pxa c746cdd 2011-25-11
+ pleb2 arm pxa b185a1c 2011-25-11
+ cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
+ cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
+ mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
+ ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
+ ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
+ zylonite arm pxa b66521a 2011-09-05
+ shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
+ modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
+ lpc2292sodimm arm arm720t d1a067a 2011-09-05
+ lart arm sa1100 3d57573 2011-09-05 Alex Z??pke <azu@sysgo.de>
+ impa7 arm arm720t c1f8750 2011-09-05 Marius Gr??ger <mag@sysgo.de>
+ gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
+ evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
+ ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr??ger <mag@sysgo.de>
+ dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z??pke <azu@sysgo.de>
+ SMN42 arm arm720t 6aac646 2011-09-05
+ at91rm9200dk arm arm920t 1c85752 2011-07-17
+ m501sk arm arm920t b1a2bd4 2011-07-17
+ kb9202 arm arm920t 5bd3814 2011-07-17
+ csb637 arm arm920t d14af08 2011-07-17
+ cmc_pu2 arm arm920t 37a9b4d 2011-07-17
+ at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
+ voiceblue arm arm925t 1b793a4 2011-07-17
+ smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
+ sbc2410x arm arm920t 1f7f0ed 2011-07-17
+ netstar arm arm925t 6ea2405 2011-07-17
+ mx1fs2 arm arm920t 6962419 2011-07-17
+ lpd7a404 arm lh7a40x 957731e 2011-07-17
+ edb9301 arm arm920t 716f7ad 2011-07-17
+ edb9302 arm arm920t 716f7ad 2011-07-17
+ edb9302a arm arm920t 716f7ad 2011-07-17
+ edb9307 arm arm920t 716f7ad 2011-07-17
+ edb9307a arm arm920t 716f7ad 2011-07-17
+ edb9312 arm arm920t 716f7ad 2011-07-17
+ edb9315 arm arm920t 716f7ad 2011-07-17
+ edb9315a arm arm920t 716f7ad 2011-07-17
+ B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
+ armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
+ assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
+ trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
+ xsengine ARM PXA2xx 4262a7c 2010-10-20
+ wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
+ delta ARM PXA2xx 75e2035 2010-10-20
+ mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
+ barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
+ ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
+ VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
+ NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
+ CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
+ logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
+ CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
+ PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
+ spieval powerpc MPC5200 69434e4 2010-09-19
+ smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
+ HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
+ GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
+ AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23
+ suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
+ XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
+ MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
+ adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
+ R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
+ CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
++PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de>
+PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
diff --cc include/configs/tegra-common.h
index 88acccf,4cc35e5..036ded0
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@@ -157,6 -167,7 +167,8 @@@
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SYS_GENERIC_BOARD
+ /* Misc utility code */
+ #define CONFIG_BOUNCE_BUFFER
#endif /* _TEGRA_COMMON_H_ */
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130318/9de2b73a/attachment.pgp>
next prev parent reply other threads:[~2013-03-18 17:06 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 22:01 [U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini [this message]
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130318170606.GA25919@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox