From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-arm/master
Date: Tue, 20 May 2014 10:57:08 +0200 [thread overview]
Message-ID: <E1WmfrB-0000CW-1V@janus> (raw)
Hello Tom,
The following changes since commit
d7782d06534fe4fa47a49fa7c106de5ba85a9687:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
18:30:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:
Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42
+0200)
Note: there still is a Zynq PR pending right now, but I wanted
to get re-synchronized with mainline first; a further PR with Zynq
and individual patches will arrive soon.
----------------------------------------------------------------
Akshay Saraswat (3):
Exynos5: config: Enable FIT
S5P: Exynos: Add GPIO pin numbering and rename definitions
S5P: Exynos: Config: Enable GPIO CMD config
Albert ARIBAUD (12):
arm1136: move cache code from start.S to cache.c
arm: move reset_cpu from start.S into cpu.c
arm: pxa: move SP check from start.S to cpuinfo.c
arm: remove unused _end_vect and _vectors_end symbols
arm: move exception handling out of start.S files
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge remote-tracking branch 'u-boot-sh/rmobile'
boards.cfg: reformat
Merge remote-tracking branch 'u-boot/master'
Ash Charles (1):
am335x: pepper: Add Gumstix Pepper AM335x-based machine
Belisko Marek (1):
mtd: nand: omap_gpmc: Fix update of read_ecc in oob
Christian Riesch (1):
arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
image
Dmitry Lifshitz (3):
ARM: OMAP5: add UART4 support
ARM: OMAP5: Power: add LDO2 support for Palmas driver
ARM: OMAP5: add CKO buffer control mask
Egli, Samuel (7):
siemens: cosmetic: remove unused and rename defines
siemens: update DDR3 parameters for dxr2
siemens: add led cmd for flexible LED control
siemens: change LED indication in DFU mode
siemens: cosmetic: rename project_dir
siemens:cosmetic, dxr2: rename dxr2 to draco
siemens, draco: add new target
Eric Benard (8):
imx-common: add board_video_skip
nitrogen6x: use common board_video_skip
mx6sabresd: use common board_video_skip
RiOTboard and MarSBoard: add new boards support
imx-common/video: add detect_hdmi
nitrogen6x: use common detect_hdmi
mx6sabresd: use common detect_hdmi
embest/mx6boards: use common detect_hdmi
Eric Nelson (1):
ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
Fabio Estevam (11):
wandboard: Convert to generic board
mx53loco: Convert to generic board
mx6sabre_common: Convert to generic board
mx53ard: Convert to generic board
mx53smd: Convert to generic board
mx53evk: Convert to generic board
udoo: Convert to generic board
hummingboard: Convert to generic board
mx6slevk: Add SPI NOR flash support
nitrogen6x: Fix the PAD settings for the ECSPI chipselect
iomux-v3: Add support for mx6sl LVE bit
Inha Song (1):
samsung: misc: add env default option to lcd menu
Jaehoon Chung (1):
ARM: exynos: remove the unused code
Khoronzhuk, Ivan (1):
config: k2hk_evm: Add generic board support
Marek Vasut (1):
arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD
Mateusz Zalega (1):
ARM: Samsung: s5p_goni: maintainer update
Nobuhiro Iwamatsu (22):
arm: rmobile: Coordinate the common part of the header file of
r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and
latency setting arm: rmobile: koelsch: Change name of structure
arm: rmobile: koelsch: Remove NOR-Flash support
arm: rmobile: lager: Change name of the structure
arm: rmobile: lager: Remove NOR-Flash support
arm: rmobile: Merge functions to get the CPU information of
R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in
rmobile_get_cpu_rev_integer() arm: rmobile: Add
rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add
prototype for function to get the CPU information to rmobile.h arm:
rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add
support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
arm: rmobile: keolsch: Add support ES2 revision of R8A7791
arm: rmobile: lager: Update QoS initialization to version 0.955
arm: rmobile: koelsch: Update QoS initialization
arm: rmobile: koelsch: Update calculation of
CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL
regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
arm: rmobile: lager: Change to maximum CPU frequency
arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE
Otavio Salvador (2):
wandboard: add Future Eletronics 7" WVGA LCD extension board
wandboard: Pass video kernel arguments for HDMI and LCD
Przemyslaw Marczak (4):
samsung: misc: allows using environmental macros as args in menu
commands samsung: misc: add gpt restore option to lcd menu
samsung: misc: menu: increase delay in menu main loop
samsung: misc: remove download mode info screen
Robert Nelson (2):
omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
omap3_beagle: xM A/B validate new dtb exits in file system
Stefano Babic (3):
mx6: fix weird formatting in imx6q-sabreauto.dts
Merge branch 'master' of git://git.denx.de/u-boot-arm
Merge branch 'master' of git://git.denx.de/u-boot-arm
Stephen Warren (10):
ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
ARM: tegra: allow pinmux mux option not to be set by init tables
ARM: tegra: add GPIO initialization table function
ARM: tegra: add function to enable input clamping on tristate
ARM: tegra: make use of GPIO init table on Jetson TK1
ARM: tegra: clamp inputs on Jetson TK1
ARM: tegra: update Venice2 pinmux
ARM: tegra: Venice2 pinmux spreadsheet updates
ARM: tegra: use a CPU freq that all SKUs can support
Thomas Diener (2):
imx25: Add new hardware registers
video: Add support for imx25 lcd controller
Tim Harvey (10):
ventana: fixed comments in eeprom header
ventana: remove redundant include
power: make pfuze100 be able to coexist with other pmics
ventana: use non-generic pfuze100 init
power: Add support for LTC3676 PMIC
ventana: Add support for the LTC3676 PMIC
imx6: ventana: fix system-serial dt property
imx: ventana: Convert to generic board
imx: ventana: add HDMI and LVDS display capability
nand: remove CONFIG_SYS_NAND_PAGE_SIZE
Yegor Yefremov (1):
am33xx: add SSC enable macro
?ukasz Majewski (2):
trats2: config: fix: Set default console to ttySAC2
trats: config: fix: Set default console to ttySAC2
Makefile
| 2 +-
arch/arm/cpu/arm1136/start.S |
254 +-------------
arch/arm/cpu/arm1176/start.S |
198 +----------
arch/arm/cpu/arm720t/start.S |
229 +------------
arch/arm/cpu/arm720t/tegra-common/cpu.c |
10 +-
arch/arm/cpu/arm720t/tegra30/cpu.c |
23 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds
| 3 +-
arch/arm/cpu/arm920t/start.S |
216 +-----------
arch/arm/cpu/arm926ejs/mxs/start.S |
92 +-----
arch/arm/cpu/arm926ejs/spear/start.S |
27 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
| 1 +
arch/arm/cpu/arm926ejs/start.S |
262 +--------------
arch/arm/cpu/arm946es/cpu.c |
13 +
arch/arm/cpu/arm946es/start.S |
246 +-------------
arch/arm/cpu/arm_intcm/start.S |
228 +------------
arch/arm/cpu/armv7/exynos/pinmux.c |
561 +++++++++++++++++--------------
arch/arm/cpu/armv7/rmobile/Makefile
| 4 +-
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c |
29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
cpu_info-rcar.c} | 12 +-
arch/arm/cpu/armv7/rmobile/cpu_info.c |
49 ++-
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S |
20 +-
arch/arm/cpu/armv7/socfpga/lowlevel_init.S |
15 +-
arch/arm/cpu/armv7/start.S |
253 +-------------
arch/arm/cpu/armv7/zynq/u-boot.lds
| 2 +-
arch/arm/cpu/pxa/cpuinfo.c
| 6 +
arch/arm/cpu/pxa/start.S |
253 +-------------
arch/arm/cpu/sa1100/cpu.c |
14 +
arch/arm/cpu/sa1100/start.S |
225 +------------
arch/arm/cpu/tegra-common/pinmux-common.c |
19 ++
arch/arm/cpu/u-boot-spl.lds
| 1 +
arch/arm/cpu/u-boot.lds
| 1 +
arch/arm/dts/exynos4210-origen.dts
| 4 +-
arch/arm/dts/exynos4210-trats.dts
| 6 +-
arch/arm/dts/exynos4210-universal_c210.dts
| 4 +-
arch/arm/dts/exynos4412-trats2.dts
| 4 +-
arch/arm/dts/imx6q-sabreauto.dts |
10 +-
arch/arm/imx-common/Makefile
| 1 +
arch/arm/imx-common/iomux-v3.c
| 8 +
arch/arm/imx-common/video.c |
65 ++++
arch/arm/include/asm/arch-am33xx/clock.h
| 2 +
arch/arm/include/asm/arch-exynos/cpu.h |
17 +-
arch/arm/include/asm/arch-exynos/gpio.h |
1761
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
arch/arm/include/asm/arch-mx25/imx-regs.h |
175 ++++++++++
arch/arm/include/asm/arch-mx6/mx6sl_pins.h
| 4 +
arch/arm/include/asm/arch-omap5/clock.h
| 3 +
arch/arm/include/asm/arch-omap5/omap.h
| 1 +
arch/arm/include/asm/arch-rmobile/r8a7790.h |
609 +---------------------------------
arch/arm/include/asm/arch-rmobile/r8a7791.h |
626 +----------------------------------
arch/arm/include/asm/arch-rmobile/rcar-base.h |
637 +++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-rmobile/rmobile.h
| 6 +
arch/arm/include/asm/arch-s5pc1xx/gpio.h |
948 ++++++++++++++++++++++++++++++++++++++++++++--------
arch/arm/include/asm/arch-tegra/gpio.h |
20 ++
arch/arm/include/asm/arch-tegra/pinmux.h
| 5 +
arch/arm/include/asm/arch-tegra/tegra_mmc.h
| 2 -
arch/arm/include/asm/arch-tegra114/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra124/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra20/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra30/pinmux.h
| 1 +
arch/arm/include/asm/imx-common/iomux-v3.h
| 5 +
arch/arm/include/asm/imx-common/video.h |
24 ++
arch/arm/lib/Makefile
| 2 +-
arch/arm/lib/cache.c |
13 +-
arch/arm/lib/vectors.S |
291 ++++++++++++++++
board/boundary/nitrogen6x/nitrogen6x.c |
69 +---
board/compulab/cm_t335/u-boot.lds
| 1 +
board/embest/mx6boards/Makefile
| 9 +
board/embest/mx6boards/mx6boards.c |
601 +++++++++++++++++++++++++++++++++
board/freescale/mx31ads/u-boot.lds
| 1 +
board/freescale/mx6sabresd/mx6sabresd.c |
67 +---
board/freescale/mx6slevk/mx6slevk.c |
20 ++
board/gateworks/gw_ventana/gw_ventana.c |
215 ++++++++++--
board/gateworks/gw_ventana/ventana_eeprom.h |
14 +-
board/gumstix/pepper/Makefile |
13 +
board/gumstix/pepper/board.c |
226 +++++++++++++
board/gumstix/pepper/board.h |
19 ++
board/gumstix/pepper/mux.c |
78 +++++
board/nvidia/jetson-tk1/jetson-tk1.c
| 6 +
board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h |
256 +++++++++-----
board/nvidia/venice2/pinmux-config-venice2.h |
567 +++++++++++++++----------------
board/nvidia/venice2/venice2.c |
19 +-
board/renesas/koelsch/koelsch.c |
194 +----------
board/renesas/koelsch/qos.c |
404 ++++++++++++++---------
board/renesas/lager/lager.c |
196 +----------
board/renesas/lager/qos.c |
236 ++++++-------
board/samsung/arndale/arndale.c |
11 +-
board/samsung/common/misc.c |
130 ++++----
board/samsung/goni/goni.c |
32 +-
board/samsung/smdk5250/exynos5-dt.c |
20 +-
board/samsung/smdk5250/smdk5250.c |
19 +-
board/samsung/smdk5420/smdk5420.c |
15 +-
board/samsung/smdkc100/smdkc100.c
| 5 +-
board/samsung/smdkv310/smdkv310.c |
19 +-
board/samsung/trats/trats.c |
39 +--
board/samsung/trats2/trats2.c |
74 ++---
board/samsung/universal_c210/universal.c |
51 ++-
board/siemens/common/board.c |
46 ++- board/siemens/{dxr2 =>
draco}/Makefile | 0 board/siemens/{dxr2
=> draco}/board.c | 112 ++++---
board/siemens/{dxr2 => draco}/board.h |
26 +- board/siemens/{dxr2 =>
draco}/mux.c | 2 +-
board/siemens/pxm2/board.c |
10 +-
board/siemens/rut/board.c
| 2 +-
board/ti/am335x/u-boot.lds
| 1 +
board/wandboard/wandboard.c |
146 ++++++--
boards.cfg
| 9 +-
common/spl/spl_nand.c
| 2 +-
drivers/gpio/s5p_gpio.c |
204 ++++++++++--
drivers/gpio/tegra_gpio.c |
20 ++
drivers/mmc/tegra_mmc.c |
13 +-
drivers/mtd/nand/omap_gpmc.c
| 2 +-
drivers/power/pmic/Makefile
| 1 +
drivers/power/pmic/pmic_ltc3676.c |
32 ++
drivers/power/pmic/pmic_pfuze100.c
| 2 +-
drivers/video/Makefile
| 1 +
drivers/video/imx25lcdc.c |
121 +++++++
include/configs/beaver.h
| 3 +
include/configs/cardhu.h
| 3 +
include/configs/da850evm.h
| 1 +
include/configs/draco.h |
92 ++++++
include/configs/dxr2.h
| 4 +-
include/configs/embestmx6boards.h |
336 +++++++++++++++++++
include/configs/exynos5-dt.h
| 2 +
include/configs/gw_ventana.h |
20 ++
include/configs/hummingboard.h
| 2 +
include/configs/k2hk_evm.h
| 1 +
include/configs/koelsch.h |
36 +-
include/configs/lager.h |
40 +--
include/configs/m28evk.h
| 1 -
include/configs/mx53ard.h
| 2 +
include/configs/mx53evk.h
| 2 +
include/configs/mx53loco.h
| 2 +
include/configs/mx53smd.h
| 2 +
include/configs/mx6sabre_common.h
| 2 +
include/configs/mx6sabresd.h
| 1 +
include/configs/mx6slevk.h |
12 +
include/configs/mxs.h
| 1 +
include/configs/nitrogen6x.h
| 2 +
include/configs/omap3_beagle.h |
10 +-
include/configs/pepper.h |
99 ++++++
include/configs/pxm2.h
| 2 +-
include/configs/s5p_goni.h
| 4 +-
include/configs/s5pc210_universal.h |
23 +-
include/configs/siemens-am33x-common.h
| 8 +-
include/configs/smdk5250.h
| 4 +
include/configs/smdk5420.h
| 4 +
include/configs/smdkv310.h
| 1 +
include/configs/snow.h
| 4 +
include/configs/tegra-common.h
| 7 +
include/configs/trats.h |
17 +-
include/configs/trats2.h |
17 +-
include/configs/udoo.h
| 2 +
include/configs/wandboard.h |
38 ++-
include/palmas.h
| 4 +
include/power/ltc3676_pmic.h |
51 +++
include/power/pfuze100_pmic.h
| 1 +
include/samsung/misc.h
| 2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
100644 arch/arm/lib/vectors.S create mode 100644
board/embest/mx6boards/Makefile create mode 100644
board/embest/mx6boards/mx6boards.c create mode 100644
board/gumstix/pepper/Makefile create mode 100644
board/gumstix/pepper/board.c create mode 100644
board/gumstix/pepper/board.h create mode 100644
board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
(63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
drivers/power/pmic/pmic_ltc3676.c create mode 100644
drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
create mode 100644 include/configs/embestmx6boards.h create mode
100644 include/configs/pepper.h create mode 100644
include/power/ltc3676_pmic.h
Amicalement,
--
Albert.
next reply other threads:[~2014-05-20 8:57 UTC|newest]
Thread overview: 259+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-20 8:57 Albert ARIBAUD [this message]
2014-05-22 19:12 ` [U-Boot] Pull request: u-boot-arm/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-07-10 20:33 [U-Boot] pull " Albert ARIBAUD
2013-06-21 21:52 [U-Boot] Pull " Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1WmfrB-0000CW-1V@janus \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox