[U-Boot] [PATCH 1/3] board/BuR/common: simplify access to devicetree

[U-Boot] [PATCH 1/3] board/BuR/common: simplify access to devicetree

[Hannes Petermaier]

instead of polling everytime the environment, we take usage of the global
gd->fdt_blob variable and check it only against NULL.

Variable "dtbaddr" from environment is needed only one time on loading the
devicetree within "load_devicetree()"

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
---

 board/BuR/common/common.c |  114 ++++++++++++++++++++++-----------------------
 1 file changed, 55 insertions(+), 59 deletions(-)

diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index ccaa9c6..81ed8e5 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -39,7 +39,7 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_USE_FDT
-  #define FDTPROP(a, b, c) fdt_getprop_u32_default((void *)a, b, c, ~0UL)
+  #define FDTPROP(b, c) fdt_getprop_u32_default(gd->fdt_blob, b, c, ~0UL)
   #define PATHTIM "/panel/display-timings/default"
   #define PATHINF "/panel/panel-info"
 #endif
@@ -50,51 +50,50 @@ int load_lcdtiming(struct am335x_lcdpanel *panel)
 {
 	struct am335x_lcdpanel pnltmp;
 #ifdef CONFIG_USE_FDT
-	u32 dtbaddr = getenv_ulong("dtbaddr", 16, ~0UL);
 	u32 dtbprop;
 
-	if (dtbaddr == ~0UL) {
-		puts("load_lcdtiming: failed to get 'dtbaddr' from env!\n");
+	if (gd->fdt_blob == NULL) {
+		printf("%s: don't have a valid gd->fdt_blob!\n", __func__);
 		return -1;
 	}
 	memcpy(&pnltmp, (void *)panel, sizeof(struct am335x_lcdpanel));
 
-	pnltmp.hactive = FDTPROP(dtbaddr, PATHTIM, "hactive");
-	pnltmp.vactive = FDTPROP(dtbaddr, PATHTIM, "vactive");
-	pnltmp.bpp = FDTPROP(dtbaddr, PATHINF, "bpp");
-	pnltmp.hfp = FDTPROP(dtbaddr, PATHTIM, "hfront-porch");
-	pnltmp.hbp = FDTPROP(dtbaddr, PATHTIM, "hback-porch");
-	pnltmp.hsw = FDTPROP(dtbaddr, PATHTIM, "hsync-len");
-	pnltmp.vfp = FDTPROP(dtbaddr, PATHTIM, "vfront-porch");
-	pnltmp.vbp = FDTPROP(dtbaddr, PATHTIM, "vback-porch");
-	pnltmp.vsw = FDTPROP(dtbaddr, PATHTIM, "vsync-len");
-	pnltmp.pup_delay = FDTPROP(dtbaddr, PATHTIM, "pupdelay");
-	pnltmp.pon_delay = FDTPROP(dtbaddr, PATHTIM, "pondelay");
+	pnltmp.hactive = FDTPROP(PATHTIM, "hactive");
+	pnltmp.vactive = FDTPROP(PATHTIM, "vactive");
+	pnltmp.bpp = FDTPROP(PATHINF, "bpp");
+	pnltmp.hfp = FDTPROP(PATHTIM, "hfront-porch");
+	pnltmp.hbp = FDTPROP(PATHTIM, "hback-porch");
+	pnltmp.hsw = FDTPROP(PATHTIM, "hsync-len");
+	pnltmp.vfp = FDTPROP(PATHTIM, "vfront-porch");
+	pnltmp.vbp = FDTPROP(PATHTIM, "vback-porch");
+	pnltmp.vsw = FDTPROP(PATHTIM, "vsync-len");
+	pnltmp.pup_delay = FDTPROP(PATHTIM, "pupdelay");
+	pnltmp.pon_delay = FDTPROP(PATHTIM, "pondelay");
 
 	/* calc. proper clk-divisor */
-	dtbprop = FDTPROP(dtbaddr, PATHTIM, "clock-frequency");
+	dtbprop = FDTPROP(PATHTIM, "clock-frequency");
 	if (dtbprop != ~0UL)
 		pnltmp.pxl_clk_div = 192000000 / dtbprop;
 	else
 		pnltmp.pxl_clk_div = ~0UL;
 
 	/* check polarity of control-signals */
-	dtbprop = FDTPROP(dtbaddr, PATHTIM, "hsync-active");
+	dtbprop = FDTPROP(PATHTIM, "hsync-active");
 	if (dtbprop == 0)
 		pnltmp.pol |= HSYNC_INVERT;
-	dtbprop = FDTPROP(dtbaddr, PATHTIM, "vsync-active");
+	dtbprop = FDTPROP(PATHTIM, "vsync-active");
 	if (dtbprop == 0)
 		pnltmp.pol |= VSYNC_INVERT;
-	dtbprop = FDTPROP(dtbaddr, PATHINF, "sync-ctrl");
+	dtbprop = FDTPROP(PATHINF, "sync-ctrl");
 	if (dtbprop == 1)
 		pnltmp.pol |= HSVS_CONTROL;
-	dtbprop = FDTPROP(dtbaddr, PATHINF, "sync-edge");
+	dtbprop = FDTPROP(PATHINF, "sync-edge");
 	if (dtbprop == 1)
 		pnltmp.pol |= HSVS_RISEFALL;
-	dtbprop = FDTPROP(dtbaddr, PATHTIM, "pixelclk-active");
+	dtbprop = FDTPROP(PATHTIM, "pixelclk-active");
 	if (dtbprop == 0)
 		pnltmp.pol |= PXCLK_INVERT;
-	dtbprop = FDTPROP(dtbaddr, PATHTIM, "de-active");
+	dtbprop = FDTPROP(PATHTIM, "de-active");
 	if (dtbprop == 0)
 		pnltmp.pol |= DE_INVERT;
 #else
@@ -163,11 +162,16 @@ static int load_devicetree(void)
 	char *dtbname = getenv("dtb");
 	char *dtbdev = getenv("dtbdev");
 	char *dtppart = getenv("dtbpart");
-	u32 dtbaddr = getenv_ulong("dtbaddr", 16, ~0UL);
+	u32 dtbaddr = getenv_ulong("dtbaddr", 16, 0UL);
+	int rc;
 	loff_t dtbsize;
 
-	if (!dtbdev || !dtbdev) {
-		puts("load_devicetree: <dtbdev>/<dtbpart> missing.\n");
+	if (dtbaddr == 0) {
+		printf("%s: don't have a valid <dtbaddr> in env!\n", __func__);
+		return -1;
+	}
+	if (!dtbdev || !dtbdev || !dtbname) {
+		printf("%s: <dtbdev>/<dtbpart>/<dtb> missing.\n", __func__);
 		return -1;
 	}
 
@@ -175,18 +179,16 @@ static int load_devicetree(void)
 		puts("load_devicetree: set_blk_dev failed.\n");
 		return -1;
 	}
-	if (dtbname && dtbaddr != ~0UL) {
-		if (fs_read(dtbname, dtbaddr, 0, 0, &dtbsize) == 0) {
-			gd->fdt_blob = (void *)dtbaddr;
-			gd->fdt_size = dtbsize;
-			debug("loaded %d bytes of dtb onto 0x%08x\n",
-			      (u32)dtbsize, dtbaddr);
-			return dtbsize;
-		}
-		puts("load_devicetree: load dtb failed,file does not exist!\n");
+	rc = fs_read(dtbname, (u32)dtbaddr, 0, 0, &dtbsize);
+	if (rc == 0) {
+		gd->fdt_blob = (void *)dtbaddr;
+		gd->fdt_size = dtbsize;
+		debug("loaded %d bytes of dtb onto 0x%08x\n",
+		      (u32)dtbsize, (u32)gd->fdt_blob);
+		return dtbsize;
 	}
 
-	puts("load_devicetree: <dtb>/<dtbaddr> missing!\n");
+	printf("%s: load dtb failed!\n", __func__);
 	return -1;
 }
 
@@ -196,26 +198,25 @@ static const char *dtbmacaddr(u32 ifno)
 	char enet[16];
 	const char *mac;
 	const char *path;
-	u32 dtbaddr = getenv_ulong("dtbaddr", 16, ~0UL);
 
-	if (dtbaddr == ~0UL) {
-		puts("dtbmacaddr: failed to get 'dtbaddr' from env!\n");
+	if (gd->fdt_blob == NULL) {
+		printf("%s: don't have a valid gd->fdt_blob!\n", __func__);
 		return NULL;
 	}
 
-	node = fdt_path_offset((void *)dtbaddr, "/aliases");
+	node = fdt_path_offset(gd->fdt_blob, "/aliases");
 	if (node < 0)
 		return NULL;
 
 	sprintf(enet, "ethernet%d", ifno);
-	path = fdt_getprop((void *)dtbaddr, node, enet, NULL);
+	path = fdt_getprop(gd->fdt_blob, node, enet, NULL);
 	if (!path) {
 		printf("no alias for %s\n", enet);
 		return NULL;
 	}
 
-	node = fdt_path_offset((void *)dtbaddr, path);
-	mac = fdt_getprop((void *)dtbaddr, node, "mac-address", &len);
+	node = fdt_path_offset(gd->fdt_blob, path);
+	mac = fdt_getprop(gd->fdt_blob, node, "mac-address", &len);
 	if (mac && is_valid_ether_addr((u8 *)mac))
 		return mac;
 
@@ -226,15 +227,14 @@ static void br_summaryscreen_printdtb(char *prefix,
 				       char *name,
 				       char *suffix)
 {
-	u32 dtbaddr = getenv_ulong("dtbaddr", 16, ~0UL);
 	char buf[32] = { 0 };
 	const char *nodep = buf;
 	char *mac = 0;
 	int nodeoffset;
 	int len;
 
-	if (dtbaddr == ~0UL) {
-		puts("br_summaryscreen: failed to get 'dtbaddr' from env!\n");
+	if (gd->fdt_blob == NULL) {
+		printf("%s: don't have a valid gd->fdt_blob!\n", __func__);
 		return;
 	}
 
@@ -247,13 +247,13 @@ static void br_summaryscreen_printdtb(char *prefix,
 		if (mac)
 			sprintf(buf, "%pM", mac);
 	} else {
-		nodeoffset = fdt_path_offset((void *)dtbaddr,
+		nodeoffset = fdt_path_offset(gd->fdt_blob,
 					     "/factory-settings");
 		if (nodeoffset < 0) {
 			puts("no 'factory-settings' in dtb!\n");
 			return;
 		}
-		nodep = fdt_getprop((void *)dtbaddr, nodeoffset, name, &len);
+		nodep = fdt_getprop(gd->fdt_blob, nodeoffset, name, &len);
 	}
 	if (nodep && strlen(nodep) > 1)
 		lcd_printf("%s %s %s", prefix, nodep, suffix);
@@ -318,13 +318,11 @@ void lcdpower(int on)
 {
 	u32 pin, swval, i;
 #ifdef CONFIG_USE_FDT
-	u32 dtbaddr = getenv_ulong("dtbaddr", 16, ~0UL);
-
-	if (dtbaddr == ~0UL) {
-		puts("lcdpower: failed to get 'dtbaddr' from env!\n");
+	if (gd->fdt_blob == NULL) {
+		printf("%s: don't have a valid gd->fdt_blob!\n", __func__);
 		return;
 	}
-	pin = FDTPROP(dtbaddr, PATHINF, "pwrpin");
+	pin = FDTPROP(PATHINF, "pwrpin");
 #else
 	pin = getenv_ulong("ds1_pwr", 16, ~0UL);
 #endif
@@ -385,15 +383,13 @@ void lcd_ctrl_init(void *lcdbase)
 void lcd_enable(void)
 {
 #ifdef CONFIG_USE_FDT
-	u32 dtbaddr = getenv_ulong("dtbaddr", 16, ~0UL);
-
-	if (dtbaddr == ~0UL) {
-		puts("lcdpower: failed to get 'dtbaddr' from env!\n");
+	if (gd->fdt_blob == NULL) {
+		printf("%s: don't have a valid gd->fdt_blob!\n", __func__);
 		return;
 	}
-	unsigned int driver = FDTPROP(dtbaddr, PATHINF, "brightdrv");
-	unsigned int bright = FDTPROP(dtbaddr, PATHINF, "brightdef");
-	unsigned int pwmfrq = FDTPROP(dtbaddr, PATHINF, "brightfdim");
+	unsigned int driver = FDTPROP(PATHINF, "brightdrv");
+	unsigned int bright = FDTPROP(PATHINF, "brightdef");
+	unsigned int pwmfrq = FDTPROP(PATHINF, "brightfdim");
 #else
 	unsigned int driver = getenv_ulong("ds1_bright_drv", 16, 0UL);
 	unsigned int bright = getenv_ulong("ds1_bright_def", 10, 50);
-- 
1.7.9.5

[U-Boot] [PATCH 2/3] board/BuR/tseries: reactivate NAND-board

[Hannes Petermaier]

The NAND-version has been become a bit orphan.
Now we need to reactivate it, so bring necessary things:

- loading devicetree
- switch control signal to correct pins
- setup pinmux
- default-environment

up to date.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
---

 board/BuR/common/common.c |   15 +++++++++++----
 board/BuR/tseries/board.c |    3 +++
 board/BuR/tseries/mux.c   |    2 +-
 include/configs/tseries.h |   37 ++++++++++++++++++++-----------------
 4 files changed, 35 insertions(+), 22 deletions(-)

diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index 81ed8e5..87e4fd6 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -33,6 +33,7 @@
 #endif
 #include "bur_common.h"
 #include "../../../drivers/video/am335x-fb.h"
+#include <nand.h>
 
 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 
@@ -159,17 +160,22 @@ int load_lcdtiming(struct am335x_lcdpanel *panel)
 #ifdef CONFIG_USE_FDT
 static int load_devicetree(void)
 {
-	char *dtbname = getenv("dtb");
-	char *dtbdev = getenv("dtbdev");
-	char *dtppart = getenv("dtbpart");
-	u32 dtbaddr = getenv_ulong("dtbaddr", 16, 0UL);
 	int rc;
 	loff_t dtbsize;
+	u32 dtbaddr = getenv_ulong("dtbaddr", 16, 0UL);
 
 	if (dtbaddr == 0) {
 		printf("%s: don't have a valid <dtbaddr> in env!\n", __func__);
 		return -1;
 	}
+#ifdef CONFIG_NAND
+	dtbsize = 0x20000;
+	rc = nand_read_skip_bad(&nand_info[0], 0x40000, (size_t *)&dtbsize,
+				NULL, 0x20000, (u_char *)dtbaddr);
+#else
+	char *dtbname = getenv("dtb");
+	char *dtbdev = getenv("dtbdev");
+	char *dtppart = getenv("dtbpart");
 	if (!dtbdev || !dtbdev || !dtbname) {
 		printf("%s: <dtbdev>/<dtbpart>/<dtb> missing.\n", __func__);
 		return -1;
@@ -180,6 +186,7 @@ static int load_devicetree(void)
 		return -1;
 	}
 	rc = fs_read(dtbname, (u32)dtbaddr, 0, 0, &dtbsize);
+#endif
 	if (rc == 0) {
 		gd->fdt_blob = (void *)dtbaddr;
 		gd->fdt_size = dtbsize;
diff --git a/board/BuR/tseries/board.c b/board/BuR/tseries/board.c
index 89e989f..d1d698e 100644
--- a/board/BuR/tseries/board.c
+++ b/board/BuR/tseries/board.c
@@ -128,6 +128,9 @@ void am33xx_spl_board_init(void)
 	i2c_set_bus_num(0);
 	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 	pmicsetup(0);
+
+	gpio_direction_output(64+29, 1); /* switch NAND_RnB to GPMC_WAIT1 */
+	gpio_direction_output(64+28, 1); /* switch MII2_CRS to GPMC_WAIT0 */
 }
 
 const struct dpll_params *get_dpll_ddr_params(void)
diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
index ac7e885..caedf00 100644
--- a/board/BuR/tseries/mux.c
+++ b/board/BuR/tseries/mux.c
@@ -123,7 +123,7 @@ static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
 	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
 	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
-	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* NAND WAIT */
+	{OFFSET(gpmc_clk), (MODE(2) | RXACTIVE | PULLUP_EN)},	/* NAND WAIT */
 	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
 	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* NAND_CS0 */
 	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},	/* NAND_ADV_ALE */
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index a6c7d5f..1e41a12 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -23,6 +23,8 @@
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_OMAP_WATCHDOG
 #define CONFIG_SPL_WATCHDOG_SUPPORT
+
+#define CONFIG_SPL_GPIO_SUPPORT
 /* Bootcount using the RTC block */
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
 #define CONFIG_BOOTCOUNT_LIMIT
@@ -103,15 +105,16 @@
 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"${optargs} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \
-	"nandrootfstype=ubifs rootwait=1\0" \
-	"nandimgsize=0x500000\0" \
-	"nandboot=echo Booting from nand ...; " \
+		"root=mtd6 " \
+		"rootfstype=jffs2\0" \
+	"kernelsize=0x400000\0" \
+	"nandboot=echo booting from nand ...; " \
 		"run nandargs; " \
-		"nand read ${loadaddr} kernel ${nandimgsize}; " \
-		"bootz ${loadaddr}\0"
+		"nand read ${loadaddr} kernel ${kernelsize}; " \
+		"bootz ${loadaddr} - ${dtbaddr}\0" \
+	"defboot=run nandboot\0" \
+	"bootlimit=1\0" \
+	"altbootcmd=run usbscript\0"
 #else
 #define NANDARGS ""
 #endif /* CONFIG_NAND */
@@ -231,15 +234,15 @@ MMCARGS
 
 #define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:" \
-					"128k(SPL)," \
-					"128k(SPL.backup1)," \
-					"128k(SPL.backup2)," \
-					"128k(SPL.backup3)," \
-					"512k(u-boot)," \
-					"128k(u-boot-spl-os)," \
+					"128k(MLO)," \
+					"128k(MLO.backup)," \
+					"128k(dtb)," \
 					"128k(u-boot-env)," \
-					"5m(kernel),"\
-					"-(rootfs)"
+					"512k(u-boot)," \
+					"4m(kernel),"\
+					"128m(rootfs),"\
+					"-(user)"
+#define CONFIG_NAND_OMAP_GPMC_WSCFG	1
 #endif /* CONFIG_NAND */
 
 /* USB configuration */
@@ -298,7 +301,7 @@ MMCARGS
 #else
 #define CONFIG_ENV_IS_IN_NAND
 #endif
-#define CONFIG_ENV_OFFSET		0x120000 /* TODO: Adresse definieren */
+#define CONFIG_ENV_OFFSET		0x60000
 #define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_ENV_SIZE
 #else
 #error "no storage for Environment defined!"
-- 
1.7.9.5

[U-Boot] [PATCH 3/3] board/BuR/tseries: change pinmux

[Hannes Petermaier]

some pins on the board have been rerouted to other peripherals, so we
change the pinmux to apply with hardware-design.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>

---

 board/BuR/tseries/mux.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
index caedf00..c5dc4b7 100644
--- a/board/BuR/tseries/mux.c
+++ b/board/BuR/tseries/mux.c
@@ -17,8 +17,10 @@
 #include <i2c.h>
 
 static struct module_pin_mux uart0_pin_mux[] = {
+	/* UART0_RTS */
+	{OFFSET(uart0_rtsn), (MODE(0) | PULLUDEN)},
 	/* UART0_CTS */
-	{OFFSET(uart0_ctsn), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	{OFFSET(uart0_ctsn), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
 	/* UART0_RXD */
 	{OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
 	/* UART0_TXD */
@@ -26,9 +28,13 @@ static struct module_pin_mux uart0_pin_mux[] = {
 	{-1},
 };
 static struct module_pin_mux uart1_pin_mux[] = {
-	/* UART0_RXD */
+	/* UART1_RTS as I2C2-SCL */
+	{OFFSET(uart1_rtsn), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART1_CTS as I2C2-SDA */
+	{OFFSET(uart1_ctsn), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART1_RXD */
 	{OFFSET(uart1_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
-	/* UART0_TXD */
+	/* UART1_TXD */
 	{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
 	{-1},
 };
-- 
1.7.9.5

[U-Boot] [U-Boot, 1/3] board/BuR/common: simplify access to devicetree

[Tom Rini]

On Wed, Apr 08, 2015 at 07:38:33AM +0200, Hannes Petermaier wrote:

> instead of polling everytime the environment, we take usage of the global
> gd->fdt_blob variable and check it only against NULL.
> 
> Variable "dtbaddr" from environment is needed only one time on loading the
> devicetree within "load_devicetree()"
> 
> Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150423/495f6798/attachment.sig>

[U-Boot] [U-Boot,2/3] board/BuR/tseries: reactivate NAND-board

[Tom Rini]

On Wed, Apr 08, 2015 at 07:38:34AM +0200, Hannes Petermaier wrote:

> The NAND-version has been become a bit orphan.
> Now we need to reactivate it, so bring necessary things:
> 
> - loading devicetree
> - switch control signal to correct pins
> - setup pinmux
> - default-environment
> 
> up to date.
> 
> Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150423/b424e334/attachment.sig>

[U-Boot] [U-Boot,3/3] board/BuR/tseries: change pinmux

[Tom Rini]

On Wed, Apr 08, 2015 at 07:38:35AM +0200, Hannes Petermaier wrote:

> some pins on the board have been rerouted to other peripherals, so we
> change the pinmux to apply with hardware-design.
> 
> Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150423/aed940df/attachment.sig>