From: Vignesh R <vigneshr@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz
Date: Fri, 20 May 2016 16:11:22 +0530 [thread overview]
Message-ID: <20160520104122.3539-1-vigneshr@ti.com> (raw)
According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on
DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas
MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better
throughput.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/dts/dra7-evm.dts | 6 ++----
arch/arm/dts/dra72-evm.dts | 6 ++----
2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/dra7-evm.dts b/arch/arm/dts/dra7-evm.dts
index 08ef04e177b0..429b9edc1b2b 100644
--- a/arch/arm/dts/dra7-evm.dts
+++ b/arch/arm/dts/dra7-evm.dts
@@ -491,15 +491,13 @@
pinctrl-names = "default";
pinctrl-0 = <&qspi1_pins>;
- spi-max-frequency = <48000000>;
+ spi-max-frequency = <64000000>;
m25p80 at 0 {
compatible = "s25fl256s1","spi-flash";
- spi-max-frequency = <48000000>;
+ spi-max-frequency = <64000000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
- spi-cpol;
- spi-cpha;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/dts/dra72-evm.dts b/arch/arm/dts/dra72-evm.dts
index 205103e2b0e1..ced2f1166d8c 100644
--- a/arch/arm/dts/dra72-evm.dts
+++ b/arch/arm/dts/dra72-evm.dts
@@ -603,15 +603,13 @@
pinctrl-names = "default";
pinctrl-0 = <&qspi1_pins>;
- spi-max-frequency = <48000000>;
+ spi-max-frequency = <64000000>;
m25p80 at 0 {
compatible = "s25fl256s1","spi-flash";
- spi-max-frequency = <48000000>;
+ spi-max-frequency = <64000000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
- spi-cpol;
- spi-cpha;
#address-cells = <1>;
#size-cells = <1>;
--
2.8.3
next reply other threads:[~2016-05-20 10:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-20 10:41 Vignesh R [this message]
2016-05-20 13:02 ` [U-Boot] [PATCH] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz Tom Rini
2016-05-25 7:48 ` Vignesh R
2016-05-26 15:49 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160520104122.3539-1-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox