* [U-Boot] [PATCH 1/2] fastboot: implement Kconfig
@ 2016-08-16 0:26 Steve Rae
2016-08-16 0:26 ` [U-Boot] [PATCH 2/2] fastboot: move to Kconfig Steve Rae
2016-08-21 15:08 ` [U-Boot] [U-Boot,1/2] fastboot: implement Kconfig Tom Rini
0 siblings, 2 replies; 4+ messages in thread
From: Steve Rae @ 2016-08-16 0:26 UTC (permalink / raw)
To: u-boot
implement Kconfig for the 'fastboot' feature set
Signed-off-by: Steve Rae <steve.rae@raedomain.com>
---
It did not seem feasible to use the "moveconfig.py" tool -- mostly because
some of these configurations use defines rather than actual values...
In addition, implemented "config FASTBOOT" enable/disable for this entire
Kconfig capability, so that the existing "include/configs/*.h" capability
would not conflict....
cmd/Kconfig | 2 ++
cmd/fastboot/Kconfig | 60 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/gadget/Kconfig | 5 ++++
3 files changed, 67 insertions(+)
create mode 100644 cmd/fastboot/Kconfig
diff --git a/cmd/Kconfig b/cmd/Kconfig
index d69b817..308a0c8 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -114,6 +114,8 @@ config AUTOBOOT_STOP_STR_SHA256
endmenu
+source "cmd/fastboot/Kconfig"
+
comment "Commands"
menu "Info commands"
diff --git a/cmd/fastboot/Kconfig b/cmd/fastboot/Kconfig
new file mode 100644
index 0000000..a93d1c0
--- /dev/null
+++ b/cmd/fastboot/Kconfig
@@ -0,0 +1,60 @@
+comment "FASTBOOT"
+
+config FASTBOOT
+ bool ""
+
+menu "Fastboot support"
+ depends on FASTBOOT
+
+config USB_FUNCTION_FASTBOOT
+ bool "Enable USB fastboot gadget"
+ help
+ This enables the USB part of the fastboot gadget.
+
+config CMD_FASTBOOT
+ bool "Enable FASTBOOT command"
+ help
+ This enables the command "fastboot" which enables the Android
+ fastboot mode for the platform's USB device. Fastboot is a USB
+ protocol for downloading images, flashing and device control
+ used on Android devices.
+
+config ANDROID_BOOT_IMAGE
+ bool "Enable support for Android Boot Images"
+ help
+ This enables support for booting images which use the Android
+ image format header.
+
+if USB_FUNCTION_FASTBOOT
+
+config FASTBOOT_BUF_ADDR
+ hex "Define FASTBOOT buffer address"
+ help
+ The fastboot protocol requires a large memory buffer for
+ downloads. Define this to the starting RAM address to use for
+ downloaded images.
+
+config FASTBOOT_BUF_SIZE
+ hex "Define FASTBOOT buffer size"
+ help
+ The fastboot protocol requires a large memory buffer for
+ downloads. This buffer should be as large as possible for a
+ platform. Define this to the size available RAM for fastboot.
+
+config FASTBOOT_FLASH
+ bool "Enable FASTBOOT FLASH command"
+ help
+ The fastboot protocol includes a "flash" command for writing
+ the downloaded image to a non-volatile storage device. Define
+ this to enable the "fastboot flash" command.
+
+config FASTBOOT_FLASH_MMC_DEV
+ int "Define FASTBOOT MMC FLASH default device"
+ help
+ The fastboot "flash" command requires additional information
+ regarding the non-volatile storage device. Define this to
+ the eMMC device that fastboot should use to store the image.
+
+endif # USB_FUNCTION_FASTBOOT
+
+endmenu
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index ae62476..40839d8 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -43,6 +43,11 @@ config USB_GADGET_ATMEL_USBA
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
+config USB_GADGET_BCM_UDC_OTG_PHY
+ bool "Broadcom UDC OTG PHY"
+ help
+ Enable the Broadcom UDC OTG physical device interface.
+
config USB_GADGET_DWC2_OTG
bool "DesignWare USB2.0 HS OTG controller (gadget mode)"
select USB_GADGET_DUALSPEED
--
1.8.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 2/2] fastboot: move to Kconfig
2016-08-16 0:26 [U-Boot] [PATCH 1/2] fastboot: implement Kconfig Steve Rae
@ 2016-08-16 0:26 ` Steve Rae
2016-08-21 15:08 ` [U-Boot] [U-Boot,2/2] " Tom Rini
2016-08-21 15:08 ` [U-Boot] [U-Boot,1/2] fastboot: implement Kconfig Tom Rini
1 sibling, 1 reply; 4+ messages in thread
From: Steve Rae @ 2016-08-16 0:26 UTC (permalink / raw)
To: u-boot
- move bcm23550_w1d to Kconfig
- move bcm28155_ap to Kconfig
Signed-off-by: Steve Rae <steve.rae@raedomain.com>
---
configs/bcm23550_w1d_defconfig | 8 ++++++++
configs/bcm28155_ap_defconfig | 8 ++++++++
include/configs/bcm23550_w1d.h | 8 --------
include/configs/bcm28155_ap.h | 8 --------
4 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/configs/bcm23550_w1d_defconfig b/configs/bcm23550_w1d_defconfig
index 0ef4a37..ca4feaf 100644
--- a/configs/bcm23550_w1d_defconfig
+++ b/configs/bcm23550_w1d_defconfig
@@ -2,6 +2,13 @@ CONFIG_ARM=y
CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
CONFIG_TARGET_BCM23550_W1D=y
CONFIG_HUSH_PARSER=y
+CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_CMD_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x80000000
+CONFIG_FASTBOOT_BUF_SIZE=0x1d000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_ASKENV=y
@@ -17,6 +24,7 @@ CONFIG_CMD_FAT=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_BCM_UDC_OTG_PHY=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
CONFIG_USB_GADGET_DOWNLOAD=y
diff --git a/configs/bcm28155_ap_defconfig b/configs/bcm28155_ap_defconfig
index 70eb44a..eb8aa35 100644
--- a/configs/bcm28155_ap_defconfig
+++ b/configs/bcm28155_ap_defconfig
@@ -3,6 +3,13 @@ CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
CONFIG_TARGET_BCM28155_AP=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
+CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_CMD_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x80000000
+CONFIG_FASTBOOT_BUF_SIZE=0x7ff00000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_ASKENV=y
@@ -18,6 +25,7 @@ CONFIG_CMD_FAT=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_BCM_UDC_OTG_PHY=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
CONFIG_USB_GADGET_DOWNLOAD=y
diff --git a/include/configs/bcm23550_w1d.h b/include/configs/bcm23550_w1d.h
index 8d041ed..770dd87 100644
--- a/include/configs/bcm23550_w1d.h
+++ b/include/configs/bcm23550_w1d.h
@@ -127,17 +127,9 @@
/* Commands */
#define CONFIG_FAT_WRITE
-/* Fastboot and USB OTG */
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_FASTBOOT_FLASH
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_FASTBOOT_BUF_SIZE 0x1d000000
-#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
#undef CONFIG_USB_GADGET_VBUS_DRAW
#define CONFIG_USB_GADGET_VBUS_DRAW 0
-#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
#define CONFIG_USBID_ADDR 0x34052c46
#define CONFIG_SYS_ICACHE_OFF
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index 889e5db..df0b2ba 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -126,15 +126,7 @@
/* Commands */
#define CONFIG_FAT_WRITE
-/* Fastboot and USB OTG */
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_FASTBOOT_FLASH
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M)
-#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
#define CONFIG_USBID_ADDR 0x34052c46
#endif /* __BCM28155_AP_H */
--
1.8.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [U-Boot,1/2] fastboot: implement Kconfig
2016-08-16 0:26 [U-Boot] [PATCH 1/2] fastboot: implement Kconfig Steve Rae
2016-08-16 0:26 ` [U-Boot] [PATCH 2/2] fastboot: move to Kconfig Steve Rae
@ 2016-08-21 15:08 ` Tom Rini
1 sibling, 0 replies; 4+ messages in thread
From: Tom Rini @ 2016-08-21 15:08 UTC (permalink / raw)
To: u-boot
On Mon, Aug 15, 2016 at 05:26:26PM -0700, Steve Rae wrote:
> implement Kconfig for the 'fastboot' feature set
>
> Signed-off-by: Steve Rae <steve.rae@raedomain.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160821/69845a5d/attachment.sig>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [U-Boot,2/2] fastboot: move to Kconfig
2016-08-16 0:26 ` [U-Boot] [PATCH 2/2] fastboot: move to Kconfig Steve Rae
@ 2016-08-21 15:08 ` Tom Rini
0 siblings, 0 replies; 4+ messages in thread
From: Tom Rini @ 2016-08-21 15:08 UTC (permalink / raw)
To: u-boot
On Mon, Aug 15, 2016 at 05:26:27PM -0700, Steve Rae wrote:
> - move bcm23550_w1d to Kconfig
> - move bcm28155_ap to Kconfig
>
> Signed-off-by: Steve Rae <steve.rae@raedomain.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160821/103e2b3d/attachment.sig>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-08-21 15:08 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-08-16 0:26 [U-Boot] [PATCH 1/2] fastboot: implement Kconfig Steve Rae
2016-08-16 0:26 ` [U-Boot] [PATCH 2/2] fastboot: move to Kconfig Steve Rae
2016-08-21 15:08 ` [U-Boot] [U-Boot,2/2] " Tom Rini
2016-08-21 15:08 ` [U-Boot] [U-Boot,1/2] fastboot: implement Kconfig Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox