[U-Boot] [PATCH] mx6ull_14x14_evk: Add README file

[U-Boot] [PATCH] mx6ull_14x14_evk: Add README file

[Diego Dorta]

Add a README file to help users getting started with the board.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
---
 board/freescale/mx6ullevk/README | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 board/freescale/mx6ullevk/README

diff --git a/board/freescale/mx6ullevk/README b/board/freescale/mx6ullevk/README
new file mode 100644
index 0000000..d5c8770
--- /dev/null
+++ b/board/freescale/mx6ullevk/README
@@ -0,0 +1,36 @@
+How to use U-Boot on Freescale MX6ULL 14x14 EVK
+----------------------------------------------
+
+- First make sure you have installed the dtc package (device tree compiler):
+
+$ sudo apt-get install device-tree-compiler
+
+- Build U-Boot for MX6ULL 14x14 EVK:
+
+$ make mrproper
+$ make mx6ull_14x14_evk_defconfig
+$ make
+
+This generates the u-boot-dtb.imx image in the current directory.
+
+- Flash the u-boot-dtb.imx image into the micro SD card:
+
+$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 && sync
+
+- Jumper settings:
+
+SW601: 0 0 1 0
+Sw602: 1 0
+
+Where 0 means bottom position and 1 means top position (from the switch label
+numbers reference).
+
+Connect the USB cable between the EVK and the PC for the console.
+(The USB console connector is the one close the push buttons)
+
+Insert the micro SD card in the board, power it up and U-Boot messages should
+come up.
+
+The link for the board: http://www.nxp.com/products/microcontrollers-and- \
+processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/ \
+i.mx6qp/evaluation-kit-for-the-i.mx-6ull-applications-processor:MCIMX6ULL-EVK
-- 
2.7.4

[U-Boot] [PATCH] mx6ull_14x14_evk: Add README file

[Fabio Estevam]

On Thu, Nov 10, 2016 at 3:05 PM, Diego Dorta <diego.dorta@nxp.com> wrote:
> Add a README file to help users getting started with the board.
>
> Signed-off-by: Diego Dorta <diego.dorta@nxp.com>

Looks good:

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

[U-Boot] [PATCH] mx6ull_14x14_evk: Add README file

[Peng Fan]

Hi Diego,

> -----Original Message-----
> From: Diego Dorta [mailto:diego.dorta at nxp.com]
> Sent: Friday, November 11, 2016 1:06 AM
> To: sbabic at denx.de; Peng Fan <peng.fan@nxp.com>; u-boot at lists.denx.de
> Cc: Diego Dorta <diego.dorta@nxp.com>
> Subject: [PATCH] mx6ull_14x14_evk: Add README file
> 
> Add a README file to help users getting started with the board.
> 
> Signed-off-by: Diego Dorta <diego.dorta@nxp.com>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

Thanks,
Peng.

[U-Boot] [PATCH] mx6ull_14x14_evk: Add README file

[Jagan Teki]

On Thu, Nov 10, 2016 at 10:35 PM, Diego Dorta <diego.dorta@nxp.com> wrote:
> Add a README file to help users getting started with the board.
>
> Signed-off-by: Diego Dorta <diego.dorta@nxp.com>

Reviewed-by: Jagan Teki <jagan@openedev.com>

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

[U-Boot] mx6ull_14x14_evk: Add README file

[Tom Rini]

On Thu, Nov 10, 2016 at 03:05:37PM -0200, Diego Dorta wrote:

> Add a README file to help users getting started with the board.
> 
> Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Jagan Teki <jagan@openedev.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161113/39ef5dc0/attachment.sig>