* [U-Boot] [PATCH] ARM: mxs: Remove unused variable warning
@ 2016-12-15 15:48 Marek Vasut
2016-12-19 21:20 ` [U-Boot] " Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Marek Vasut @ 2016-12-15 15:48 UTC (permalink / raw)
To: u-boot
Shuffle the macros around a little to remove the following warning
when building for i.MX28:
arch/arm/cpu/arm926ejs/mxs/spl_boot.c:44:26: warning: ?iomux_boot? defined but not used [-Wunused-const-variable=]
static const iomux_cfg_t iomux_boot[] = {
^~~~~~~~~~
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
---
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
index eb8669b..d9d1d73 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
@@ -40,17 +40,17 @@ void early_delay(int delay)
;
}
+#if defined(CONFIG_MX23)
#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
static const iomux_cfg_t iomux_boot[] = {
-#if defined(CONFIG_MX23)
MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
-#endif
};
+#endif
static uint8_t mxs_get_bootmode_index(void)
{
--
2.10.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-12-19 21:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-12-15 15:48 [U-Boot] [PATCH] ARM: mxs: Remove unused variable warning Marek Vasut
2016-12-19 21:20 ` [U-Boot] " Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox