[U-Boot] [PATCH v2 23/30] ARM: k2g: Use board detection to wrap K2G GP specific calls

[Franklin S Cooper Jr <fcooper@ti.com>]

Certain peripherals used by K2G GP aren't used on K2G ICE evm. Or
configuration is slightly different. Therefore, use board detection to
deal with these variations.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
 board/ti/ks2_evm/board_k2g.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index a93ef47..96b313f 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -208,7 +208,9 @@ int board_mmc_init(bd_t *bis)
 		return -1;
 	}
 
-	omap_mmc_init(0, 0, 0, -1, -1);
+	if (board_is_k2g_gp())
+		omap_mmc_init(0, 0, 0, -1, -1);
+
 	omap_mmc_init(1, 0, 0, -1, -1);
 	return 0;
 }
@@ -278,11 +280,13 @@ int embedded_dtb_select(void)
 
 	k2g_reset_mux_config();
 
-	/* deassert FLASH_HOLD */
-	clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
-		     BIT(9));
-	setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
-		     BIT(9));
+	if (board_is_k2g_gp()) {
+		/* deassert FLASH_HOLD */
+		clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
+			     BIT(9));
+		setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
+			     BIT(9));
+	}
 
 	return 0;
 }
-- 
2.10.0