U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Franklin S Cooper Jr <fcooper@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 24/30] ARM: k2g: Update board_name u-boot env variable at runtime
Date: Tue, 23 May 2017 12:42:53 -0500	[thread overview]
Message-ID: <20170523174259.14797-25-fcooper@ti.com> (raw)
In-Reply-To: <20170523174259.14797-1-fcooper@ti.com>

Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to allow "board_name" to
be set depending on the board it is being ran on.

Update findfdt to use this new dynamic board_name value to determine
which dtb should be used.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
 board/ti/ks2_evm/board_k2g.c |  6 ++++++
 include/configs/k2g_evm.h    | 13 +++++++++++--
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 96b313f..5f3fc76 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -306,6 +306,12 @@ int board_late_init(void)
 	board_ti_set_ethaddr(1);
 #endif
 
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	if (board_is_k2g_gp())
+		setenv("board_name", "66AK2GGP\0");
+	else if (board_is_k2g_ice())
+		setenv("board_name", "66AK2GIC\0");
+#endif
 	return 0;
 }
 #endif
diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
index bee1be7..c6eab0f 100644
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@@ -16,6 +16,8 @@
 /* Platform type */
 #define CONFIG_SOC_K2G
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
 /* U-Boot general configuration */
 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
 	DEFAULT_MMC_TI_ARGS						\
@@ -28,7 +30,14 @@
 	"rd_spec=-\0"							\
 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
 	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0"	\
-	"name_fdt=keystone-k2g-evm.dtb\0"				\
+	"findfdt="\
+		"if test $board_name = 66AK2GGP; then " \
+			 "setenv name_fdt keystone-k2g-evm.dtb; " \
+		"else if test $board_name = 66AK2GIC; then " \
+			 "setenv name_fdt keystone-k2g-ice.dtb; " \
+		"else if test $name_fdt = undefined; then " \
+			"echo WARNING: Could not determine device tree to use;"\
+		"fi;fi;fi;\0" \
 	"name_mon=skern-k2g.bin\0"					\
 	"name_ubi=k2g-evm-ubifs.ubi\0"					\
 	"name_uboot=u-boot-spi-k2g-evm.gph\0"				\
@@ -46,7 +55,7 @@
 	"run envboot; "							\
 	"run set_name_pmmc init_${boot} init_fw_rd_${boot} "		\
 	"get_pmmc_${boot} run_pmmc get_mon_${boot} run_mon "		\
-	"get_fdt_${boot} get_kern_${boot} run_kern"
+	"findfdt get_fdt_${boot} get_kern_${boot} run_kern"
 
 #include <configs/ti_armv7_keystone2.h>
 
-- 
2.10.0

  parent reply	other threads:[~2017-05-23 17:42 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-23 17:42 [U-Boot] [PATCH v2 00/30] ARM: k2g: Add support for new K2G ICE EVM Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 01/30] ti: common: board_detect: Allow settings board detection variables manually Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 02/30] spl: fit: Break out some functions into a common file Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 03/30] boot_fit: Create helper functions that can be used to select DTB out of FIT Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 04/30] fdt: Enable selecting correct DTB from appended FIT Image Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 05/30] ti: common: board_detect: Add function to determine if EEPROM was read Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 06/30] dts: Allow OF_LIST to depend on FIT_EMBED Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 07/30] ARM: dts: k2g: Introduce U-boot specific dtsi file Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 08/30] arm: dts: Add new "generic" 66AK2Gx device tree file Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 09/30] board_f: Add new function to allow runtime DTB selection Franklin S Cooper Jr
2017-05-24 15:38   ` Franklin S Cooper Jr
2017-05-26  8:08   ` Lothar Waßmann
2017-05-26 18:24     ` Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 10/30] Makefile: Build additional binaries for dtb FIT blobs appended to U-boot Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 11/30] ARM: keystone2: Allow to build with all image formats Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 12/30] ARM: k2g: Define embedded_dtb_select for runtime DTB selection in U-boot Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 13/30] ARM: keystone2: Define board_fit_config_name_match for Keystone 2 boards Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 14/30] ks2_evm: Add EEPROM based board detection Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 15/30] defconfig: keystone2: Enable U-boot runtime DTB detection Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 16/30] ARM: keystone2: Add additional fields used for DDR3 configuration Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 17/30] ARM: k2g: Program DDR PHY MR2 register with the default value Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 18/30] ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 19/30] ks2_evm: Add EEPROM based board detection helper functions Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 20/30] ARM: k2g: Add pinmux support for K2G ICE evm Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 21/30] ARM: k2g: Add DDR3 configuration " Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 22/30] board: ks2: Use board detection to wrap code not specific to " Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 23/30] ARM: k2g: Use board detection to wrap K2G GP specific calls Franklin S Cooper Jr
2017-05-23 17:42 ` Franklin S Cooper Jr [this message]
2017-05-23 17:42 ` [U-Boot] [PATCH v2 25/30] ARM: dts: keystone-k2g: Remove skeleton.dtsi Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 26/30] ARM: dts: keystone-k2g-evm: Add unit address to memory node Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 27/30] ARM: dts: k2g: Disable netcp by default Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 28/30] ARM: dts: k2g: Add DT support for K2G Industrial Communication Engine evm Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 29/30] ARM: k2g: Add K2G ICE DTB to the list of possible DTBs Franklin S Cooper Jr
2017-05-23 17:42 ` [U-Boot] [PATCH v2 30/30] defconfig: k2g_evm_defconfig: Add K2G ICE to OF_LIST Franklin S Cooper Jr

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170523174259.14797-25-fcooper@ti.com \
    --to=fcooper@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox