* [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder
2017-09-01 8:26 [U-Boot] [PATCH v4 0/3] board: atmel: Set the ethernet mac address from eeprom Wenyou Yang
@ 2017-09-01 8:26 ` Wenyou Yang
2017-09-09 4:51 ` Simon Glass
2017-09-12 13:31 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-09-01 8:26 ` [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address Wenyou Yang
2017-09-01 8:26 ` [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom Wenyou Yang
2 siblings, 2 replies; 10+ messages in thread
From: Wenyou Yang @ 2017-09-01 8:26 UTC (permalink / raw)
To: u-boot
Create board/$(VENDOR)/common folder to accommodate the common code
shared by other atmel boards, now put the code to set ethernet mac
address from eeprom, which uses the i2c eeprom driver.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v4:
- Follow up the env function renaming.
Changes in v3: None
Changes in v2: None
arch/arm/mach-at91/include/mach/at91_common.h | 2 ++
board/atmel/common/Makefile | 11 ++++++++
board/atmel/common/board.c | 12 +++++++++
board/atmel/common/mac_eeprom.c | 36 +++++++++++++++++++++++++++
4 files changed, 61 insertions(+)
create mode 100644 board/atmel/common/Makefile
create mode 100644 board/atmel/common/board.c
create mode 100644 board/atmel/common/mac_eeprom.c
diff --git a/arch/arm/mach-at91/include/mach/at91_common.h b/arch/arm/mach-at91/include/mach/at91_common.h
index 0742ffc56f..a95fe41610 100644
--- a/arch/arm/mach-at91/include/mach/at91_common.h
+++ b/arch/arm/mach-at91/include/mach/at91_common.h
@@ -36,4 +36,6 @@ void matrix_init(void);
void redirect_int_from_saic_to_aic(void);
void configure_2nd_sram_as_l2_cache(void);
+int at91_set_ethaddr(int offset);
+
#endif /* AT91_COMMON_H */
diff --git a/board/atmel/common/Makefile b/board/atmel/common/Makefile
new file mode 100644
index 0000000000..6d9c6850b5
--- /dev/null
+++ b/board/atmel/common/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright (C) 2017 Microchip
+# Wenyou Yang <wenyou.yang@microchip.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += board.o
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_I2C_EEPROM) += mac_eeprom.o
+endif
diff --git a/board/atmel/common/board.c b/board/atmel/common/board.c
new file mode 100644
index 0000000000..7e326d925b
--- /dev/null
+++ b/board/atmel/common/board.c
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2017 Microchip
+ * Wenyou Yang <wenyou.yang@microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+void dummy(void)
+{
+}
diff --git a/board/atmel/common/mac_eeprom.c b/board/atmel/common/mac_eeprom.c
new file mode 100644
index 0000000000..60ddf00d45
--- /dev/null
+++ b/board/atmel/common/mac_eeprom.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2017 Microchip
+ * Wenyou Yang <wenyou.yang@microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c_eeprom.h>
+#include <netdev.h>
+
+int at91_set_ethaddr(int offset)
+{
+ const int ETH_ADDR_LEN = 6;
+ unsigned char ethaddr[ETH_ADDR_LEN];
+ const char *ETHADDR_NAME = "ethaddr";
+ struct udevice *dev;
+ int ret;
+
+ if (env_get(ETHADDR_NAME))
+ return 0;
+
+ ret = uclass_first_device_err(UCLASS_I2C_EEPROM, &dev);
+ if (ret)
+ return ret;
+
+ ret = i2c_eeprom_read(dev, offset, ethaddr, 6);
+ if (ret)
+ return ret;
+
+ if (is_valid_ethaddr(ethaddr))
+ eth_env_set_enetaddr(ETHADDR_NAME, ethaddr);
+
+ return 0;
+}
--
2.13.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder
2017-09-01 8:26 ` [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder Wenyou Yang
@ 2017-09-09 4:51 ` Simon Glass
2017-09-12 13:31 ` [U-Boot] [U-Boot, v4, " Tom Rini
1 sibling, 0 replies; 10+ messages in thread
From: Simon Glass @ 2017-09-09 4:51 UTC (permalink / raw)
To: u-boot
On 1 September 2017 at 02:26, Wenyou Yang <wenyou.yang@microchip.com> wrote:
> Create board/$(VENDOR)/common folder to accommodate the common code
> shared by other atmel boards, now put the code to set ethernet mac
> address from eeprom, which uses the i2c eeprom driver.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> ---
>
> Changes in v4:
> - Follow up the env function renaming.
>
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/mach-at91/include/mach/at91_common.h | 2 ++
> board/atmel/common/Makefile | 11 ++++++++
> board/atmel/common/board.c | 12 +++++++++
> board/atmel/common/mac_eeprom.c | 36 +++++++++++++++++++++++++++
> 4 files changed, 61 insertions(+)
> create mode 100644 board/atmel/common/Makefile
> create mode 100644 board/atmel/common/board.c
> create mode 100644 board/atmel/common/mac_eeprom.c
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [U-Boot, v4, 1/3] board: atmel: Create board/$(VENDOR)/common folder
2017-09-01 8:26 ` [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder Wenyou Yang
2017-09-09 4:51 ` Simon Glass
@ 2017-09-12 13:31 ` Tom Rini
1 sibling, 0 replies; 10+ messages in thread
From: Tom Rini @ 2017-09-12 13:31 UTC (permalink / raw)
To: u-boot
On Fri, Sep 01, 2017 at 04:26:16PM +0800, Wenyou Yang wrote:
> Create board/$(VENDOR)/common folder to accommodate the common code
> shared by other atmel boards, now put the code to set ethernet mac
> address from eeprom, which uses the i2c eeprom driver.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170912/09d9828b/attachment.sig>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address
2017-09-01 8:26 [U-Boot] [PATCH v4 0/3] board: atmel: Set the ethernet mac address from eeprom Wenyou Yang
2017-09-01 8:26 ` [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder Wenyou Yang
@ 2017-09-01 8:26 ` Wenyou Yang
2017-09-09 4:51 ` Simon Glass
2017-09-12 13:31 ` [U-Boot] [U-Boot, v4, " Tom Rini
2017-09-01 8:26 ` [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom Wenyou Yang
2 siblings, 2 replies; 10+ messages in thread
From: Wenyou Yang @ 2017-09-01 8:26 UTC (permalink / raw)
To: u-boot
Replace the code to set the ethernet mac address with the code from
the common folder.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/dts/at91-sama5d2_xplained.dts | 5 +++
board/atmel/sama5d2_xplained/sama5d2_xplained.c | 46 +++----------------------
configs/sama5d2_xplained_mmc_defconfig | 1 +
configs/sama5d2_xplained_spiflash_defconfig | 1 +
include/configs/sama5d2_xplained.h | 4 ---
5 files changed, 11 insertions(+), 46 deletions(-)
diff --git a/arch/arm/dts/at91-sama5d2_xplained.dts b/arch/arm/dts/at91-sama5d2_xplained.dts
index 3e624f142c..b00aaa2c79 100644
--- a/arch/arm/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/dts/at91-sama5d2_xplained.dts
@@ -102,6 +102,11 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
status = "okay";
+
+ i2c_eeprom: i2c_eeprom at 5c {
+ compatible = "atmel,24mac402";
+ reg = <0x5c>;
+ };
};
pioA: gpio at fc038000 {
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 3f0860c555..7e0cb4228f 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -8,8 +8,6 @@
#include <common.h>
#include <atmel_hlcdc.h>
#include <debug_uart.h>
-#include <dm.h>
-#include <i2c.h>
#include <lcd.h>
#include <version.h>
#include <asm/io.h>
@@ -161,50 +159,14 @@ int dram_init(void)
return 0;
}
-#ifdef CONFIG_CMD_I2C
-static int set_ethaddr_from_eeprom(void)
-{
- const int ETH_ADDR_LEN = 6;
- unsigned char ethaddr[ETH_ADDR_LEN];
- const char *ETHADDR_NAME = "ethaddr";
- struct udevice *bus, *dev;
-
- if (env_get(ETHADDR_NAME))
- return 0;
-
- if (uclass_get_device_by_seq(UCLASS_I2C, 1, &bus)) {
- printf("Cannot find I2C bus 1\n");
- return -1;
- }
-
- if (dm_i2c_probe(bus, AT24MAC_ADDR, 0, &dev)) {
- printf("Failed to probe I2C chip\n");
- return -1;
- }
-
- if (dm_i2c_read(dev, AT24MAC_REG, ethaddr, ETH_ADDR_LEN)) {
- printf("Failed to read ethernet address from EEPROM\n");
- return -1;
- }
-
- if (!is_valid_ethaddr(ethaddr)) {
- printf("The ethernet address read from EEPROM is not valid!\n");
- return -1;
- }
-
- return eth_env_set_enetaddr(ETHADDR_NAME, ethaddr);
-}
-#else
-static int set_ethaddr_from_eeprom(void)
-{
- return 0;
-}
-#endif
+#define AT24MAC_MAC_OFFSET 0x9a
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
- set_ethaddr_from_eeprom();
+#ifdef CONFIG_I2C_EEPROM
+ at91_set_ethaddr(AT24MAC_MAC_OFFSET);
+#endif
return 0;
}
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index d59fd8216c..fb7c242b1c 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -51,6 +51,7 @@ CONFIG_DM_GPIO=y
CONFIG_ATMEL_PIO4=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ATMEL=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index a997aa74bd..24698876ba 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -49,6 +49,7 @@ CONFIG_DM_GPIO=y
CONFIG_ATMEL_PIO4=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ATMEL=y
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 9ceb91924d..891218d83e 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -35,10 +35,6 @@
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
-/* I2C */
-#define AT24MAC_ADDR 0x5c
-#define AT24MAC_REG 0x9a
-
/* LCD */
#ifdef CONFIG_LCD
--
2.13.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address
2017-09-01 8:26 ` [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address Wenyou Yang
@ 2017-09-09 4:51 ` Simon Glass
2017-09-12 13:31 ` [U-Boot] [U-Boot, v4, " Tom Rini
1 sibling, 0 replies; 10+ messages in thread
From: Simon Glass @ 2017-09-09 4:51 UTC (permalink / raw)
To: u-boot
On 1 September 2017 at 02:26, Wenyou Yang <wenyou.yang@microchip.com> wrote:
> Replace the code to set the ethernet mac address with the code from
> the common folder.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/dts/at91-sama5d2_xplained.dts | 5 +++
> board/atmel/sama5d2_xplained/sama5d2_xplained.c | 46 +++----------------------
> configs/sama5d2_xplained_mmc_defconfig | 1 +
> configs/sama5d2_xplained_spiflash_defconfig | 1 +
> include/configs/sama5d2_xplained.h | 4 ---
> 5 files changed, 11 insertions(+), 46 deletions(-)
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [U-Boot, v4, 2/3] board: sama5d2_xplained: Replace code to set mac address
2017-09-01 8:26 ` [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address Wenyou Yang
2017-09-09 4:51 ` Simon Glass
@ 2017-09-12 13:31 ` Tom Rini
1 sibling, 0 replies; 10+ messages in thread
From: Tom Rini @ 2017-09-12 13:31 UTC (permalink / raw)
To: u-boot
On Fri, Sep 01, 2017 at 04:26:17PM +0800, Wenyou Yang wrote:
> Replace the code to set the ethernet mac address with the code from
> the common folder.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170912/c39077f5/attachment.sig>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom
2017-09-01 8:26 [U-Boot] [PATCH v4 0/3] board: atmel: Set the ethernet mac address from eeprom Wenyou Yang
2017-09-01 8:26 ` [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder Wenyou Yang
2017-09-01 8:26 ` [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address Wenyou Yang
@ 2017-09-01 8:26 ` Wenyou Yang
2017-09-09 4:51 ` Simon Glass
2017-09-12 13:31 ` [U-Boot] [U-Boot, v4, " Tom Rini
2 siblings, 2 replies; 10+ messages in thread
From: Wenyou Yang @ 2017-09-01 8:26 UTC (permalink / raw)
To: u-boot
Add the code to set the ethernet mac address from eeprom by using
the common code from the common folder.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v4:
- Rebase the latest commit(8b3cec7da) on uboot/master.
Changes in v3:
- remove CONFIG_SPL_I2C_SUPPORT=y from the default configuration files.
- rebase on [PATCH] misc: Makefile: Add condition on build i2c_eeprom.
https://lists.denx.de/pipermail/u-boot/2017-August/300783.html
Changes in v2:
- Add a new patch to create board/$(VENDOR)/common folder to
accommodate the common code and put the code to set the ethernet
mac address from eeprom here.
- Use the i2c_eeprom driver to read the mac address, instead of
the dm i2c API directly.
arch/arm/dts/at91-sama5d4_xplained.dts | 5 +++++
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 12 ++++++++++++
configs/sama5d4_xplained_mmc_defconfig | 3 +++
configs/sama5d4_xplained_nandflash_defconfig | 3 +++
configs/sama5d4_xplained_spiflash_defconfig | 3 +++
include/configs/sama5d4_xplained.h | 2 ++
6 files changed, 28 insertions(+)
diff --git a/arch/arm/dts/at91-sama5d4_xplained.dts b/arch/arm/dts/at91-sama5d4_xplained.dts
index ca6aff28e5..0592b31b91 100644
--- a/arch/arm/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/dts/at91-sama5d4_xplained.dts
@@ -88,6 +88,11 @@
i2c0: i2c at f8014000 {
status = "okay";
+
+ i2c_eeprom: i2c_eeprom at 5c {
+ compatible = "atmel,24mac402";
+ reg = <0x5c>;
+ };
};
macb0: ethernet at f8020000 {
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 854afcb622..248a31b8c4 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -192,6 +192,18 @@ int board_early_init_f(void)
}
#endif
+#define AT24MAC_MAC_OFFSET 0x9a
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#ifdef CONFIG_I2C_EEPROM
+ at91_set_ethaddr(AT24MAC_MAC_OFFSET);
+#endif
+ return 0;
+}
+#endif
+
int board_init(void)
{
/* adress of boot parameters */
diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig
index de0ce40a56..792d011718 100644
--- a/configs/sama5d4_xplained_mmc_defconfig
+++ b/configs/sama5d4_xplained_mmc_defconfig
@@ -47,6 +47,9 @@ CONFIG_AT91_UTMI=y
CONFIG_AT91_H32MX=y
CONFIG_DM_GPIO=y
CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
CONFIG_DM_MMC=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
index cba3c8b640..3b0af5bf00 100644
--- a/configs/sama5d4_xplained_nandflash_defconfig
+++ b/configs/sama5d4_xplained_nandflash_defconfig
@@ -44,6 +44,9 @@ CONFIG_AT91_UTMI=y
CONFIG_AT91_H32MX=y
CONFIG_DM_GPIO=y
CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
CONFIG_DM_MMC=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig
index 174e2bc5ba..26eb00598c 100644
--- a/configs/sama5d4_xplained_spiflash_defconfig
+++ b/configs/sama5d4_xplained_spiflash_defconfig
@@ -46,6 +46,9 @@ CONFIG_AT91_UTMI=y
CONFIG_AT91_H32MX=y
CONFIG_DM_GPIO=y
CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
CONFIG_DM_MMC=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_DM_SPI_FLASH=y
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index c8462b0b64..08f865016d 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -12,6 +12,8 @@
#include "at91-sama5_common.h"
+#define CONFIG_MISC_INIT_R
+
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
--
2.13.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom
2017-09-01 8:26 ` [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom Wenyou Yang
@ 2017-09-09 4:51 ` Simon Glass
2017-09-12 13:31 ` [U-Boot] [U-Boot, v4, " Tom Rini
1 sibling, 0 replies; 10+ messages in thread
From: Simon Glass @ 2017-09-09 4:51 UTC (permalink / raw)
To: u-boot
On 1 September 2017 at 02:26, Wenyou Yang <wenyou.yang@microchip.com> wrote:
> Add the code to set the ethernet mac address from eeprom by using
> the common code from the common folder.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> ---
>
> Changes in v4:
> - Rebase the latest commit(8b3cec7da) on uboot/master.
>
> Changes in v3:
> - remove CONFIG_SPL_I2C_SUPPORT=y from the default configuration files.
> - rebase on [PATCH] misc: Makefile: Add condition on build i2c_eeprom.
> https://lists.denx.de/pipermail/u-boot/2017-August/300783.html
>
> Changes in v2:
> - Add a new patch to create board/$(VENDOR)/common folder to
> accommodate the common code and put the code to set the ethernet
> mac address from eeprom here.
> - Use the i2c_eeprom driver to read the mac address, instead of
> the dm i2c API directly.
>
> arch/arm/dts/at91-sama5d4_xplained.dts | 5 +++++
> board/atmel/sama5d4_xplained/sama5d4_xplained.c | 12 ++++++++++++
> configs/sama5d4_xplained_mmc_defconfig | 3 +++
> configs/sama5d4_xplained_nandflash_defconfig | 3 +++
> configs/sama5d4_xplained_spiflash_defconfig | 3 +++
> include/configs/sama5d4_xplained.h | 2 ++
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [U-Boot, v4, 3/3] board: sama5d4_xplained: Set mac address from eeprom
2017-09-01 8:26 ` [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom Wenyou Yang
2017-09-09 4:51 ` Simon Glass
@ 2017-09-12 13:31 ` Tom Rini
1 sibling, 0 replies; 10+ messages in thread
From: Tom Rini @ 2017-09-12 13:31 UTC (permalink / raw)
To: u-boot
On Fri, Sep 01, 2017 at 04:26:18PM +0800, Wenyou Yang wrote:
> Add the code to set the ethernet mac address from eeprom by using
> the common code from the common folder.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170912/51b1bc0b/attachment.sig>
^ permalink raw reply [flat|nested] 10+ messages in thread