[U-Boot] [PATCH v6 1/6] sunxi: R40: add gigabit ethernet clocks

[Lothar Felten <lothar.felten@gmail.com>]

Add clock control entries for the gigabit interface of the Allwinner
R40/V40 CPU

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>

---
 Changelog:
 new in v2
 v2->v3->4->v5->v6: none
---
 arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 3a59016955..ee387127f3 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -60,7 +60,11 @@ struct sunxi_ccm_reg {
 	u32 reserved11;
 	u32 sata_clk_cfg;	/* 0xc8 SATA clock control (R40 only) */
 	u32 usb_clk_cfg;	/* 0xcc USB clock control */
-	u32 gmac_clk_cfg;	/* 0xd0 GMAC clock control */
+#ifdef CONFIG_MACH_SUN8I_R40
+	u32 cir0_clk_cfg;	/* 0xd0 CIR0 clock control (R40 only) */
+#else
+	u32 gmac_clk_cfg;	/* 0xd0 GMAC clock control (not for R40) */
+#endif
 	u32 reserved12[7];
 	u32 mdfs_clk_cfg;	/* 0xf0 MDFS clock control */
 	u32 dram_clk_cfg;	/* 0xf4 DRAM configuration clock control */
@@ -103,7 +107,11 @@ struct sunxi_ccm_reg {
 	u32 mtc_clk_cfg;	/* 0x158 MTC module clock */
 	u32 mbus0_clk_cfg;	/* 0x15c MBUS0 module clock */
 	u32 mbus1_clk_cfg;	/* 0x160 MBUS1 module clock */
+#ifdef CONFIG_MACH_SUN8I_R40
+	u32 gmac_clk_cfg;	/* 0x164 GMAC clock control (R40 only) */
+#else
 	u32 reserved16;
+#endif
 	u32 mipi_dsi_clk_cfg;	/* 0x168 MIPI DSI clock control */
 	u32 mipi_csi_clk_cfg;	/* 0x16c MIPI CSI clock control */
 	u32 reserved17[4];
-- 
2.14.1