U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/8] armv8: K3: am654: Add custom MMU support
Date: Tue, 21 Aug 2018 20:00:53 +0530	[thread overview]
Message-ID: <20180821143055.29012-7-lokeshvutla@ti.com> (raw)
In-Reply-To: <20180821143055.29012-1-lokeshvutla@ti.com>

Add MMU mappings for AM654 SoC.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/Makefile    |  1 +
 arch/arm/mach-k3/arm64-mmu.c | 45 ++++++++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 arch/arm/mach-k3/arm64-mmu.c

diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
index 356fc27b11..e9b7ee5210 100644
--- a/arch/arm/mach-k3/Makefile
+++ b/arch/arm/mach-k3/Makefile
@@ -4,3 +4,4 @@
 #	Lokesh Vutla <lokeshvutla@ti.com>
 
 obj-$(CONFIG_SOC_K3_AM6) += am6_init.o
+obj-$(CONFIG_ARM64) += arm64-mmu.o
diff --git a/arch/arm/mach-k3/arm64-mmu.c b/arch/arm/mach-k3/arm64-mmu.c
new file mode 100644
index 0000000000..41a9dbf899
--- /dev/null
+++ b/arch/arm/mach-k3/arm64-mmu.c
@@ -0,0 +1,45 @@
+/*
+ * K3: ARM64 MMU setup
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ * (This file is derived from arch/arm/cpu/armv8/zynqmp/cpu.c)
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/system.h>
+#include <asm/armv8/mmu.h>
+
+/* NR_DRAM_BANKS + 32bit IO + 64bit IO + terminator */
+#define NR_MMU_REGIONS	(CONFIG_NR_DRAM_BANKS + 3)
+
+/* ToDo: Add 64bit IO */
+struct mm_region am654_mem_map[NR_MMU_REGIONS] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x880000000UL,
+		.phys = 0x880000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = am654_mem_map;
-- 
2.18.0

  parent reply	other threads:[~2018-08-21 14:30 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-21 14:30 [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform Lokesh Vutla
2018-08-21 14:30 ` [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs Lokesh Vutla
2018-08-24 14:10   ` Tom Rini
2018-08-24 14:51     ` Lokesh Vutla
2018-08-24 14:55       ` Tom Rini
2018-08-24 15:14         ` Lokesh Vutla
2018-08-24 15:21           ` Tom Rini
2018-08-21 14:30 ` [U-Boot] [PATCH 2/8] arm: K3: Add support for AM654 SoC definition Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-24 14:58     ` Lokesh Vutla
2018-08-24 15:01       ` Tom Rini
2018-08-21 14:30 ` [U-Boot] [PATCH 3/8] arm: K3: Update _start instruction Lokesh Vutla
2018-08-21 14:30 ` [U-Boot] [PATCH 4/8] arm: K3: am654: Add support for boot device detection Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-24 14:58     ` Lokesh Vutla
2018-08-21 14:30 ` [U-Boot] [PATCH 5/8] arm: K3: am654: Unlock control module registers during init Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:30 ` Lokesh Vutla [this message]
2018-08-24 14:11   ` [U-Boot] [PATCH 6/8] armv8: K3: am654: Add custom MMU support Tom Rini
2018-08-21 14:30 ` [U-Boot] [PATCH 7/8] armv8: K3: am654: Introduce FIT generator script Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-24 14:59     ` Lokesh Vutla
2018-08-21 14:30 ` [U-Boot] [PATCH 8/8] armv8: K3: am654: Add support for generating build targets Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-26  6:11 ` [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform Alexander Graf
2018-08-27  9:31   ` Lokesh Vutla
2018-08-27  9:52     ` Alexander Graf
2018-08-27 10:07       ` Lokesh Vutla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180821143055.29012-7-lokeshvutla@ti.com \
    --to=lokeshvutla@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox