U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs
Date: Fri, 24 Aug 2018 10:55:11 -0400	[thread overview]
Message-ID: <20180824145511.GA26633@bill-the-cat> (raw)
In-Reply-To: <ff8cdfbd-e599-a375-050c-75cd8caf2266@ti.com>

On Fri, Aug 24, 2018 at 08:21:19PM +0530, Lokesh Vutla wrote:
> 
> 
> On Friday 24 August 2018 07:40 PM, Tom Rini wrote:
> > On Tue, Aug 21, 2018 at 08:00:48PM +0530, Lokesh Vutla wrote:
> > 
> >> Add support for Texas Instruments' K3 Generation Processor
> >> families.
> > [snip]
> >> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> >> index 9c80090aa7..f48d82f051 100644
> >> --- a/drivers/serial/ns16550.c
> >> +++ b/drivers/serial/ns16550.c
> >> @@ -175,7 +175,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
> >>  		;
> >>  
> >>  	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
> >> -#if defined(CONFIG_ARCH_OMAP2PLUS)
> >> +#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_ARCH_K3)
> >>  	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
> >>  #endif
> >>  
> >> @@ -183,7 +183,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
> >>  	serial_out(ns16550_getfcr(com_port), &com_port->fcr);
> >>  	if (baud_divisor != -1)
> >>  		NS16550_setbrg(com_port, baud_divisor);
> >> -#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX)
> >> +#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) || \
> >> +	defined(CONFIG_ARCH_K3)
> >>  	/* /16 is proper to hit 115200 with 48MHz */
> >>  	serial_out(0, &com_port->mdr1);
> >>  #endif
> > 
> > K3 would also be using CONFIG_OMAP_SERIAL once
> > https://patchwork.ozlabs.org/patch/956252/ is applied (which I'll do in
> > the next release) yes?  I think 956252 needs a follow-up that changes
> > the above hunks to be testing off CONFIG_OMAP_SERIAL instead so this
> 
> I did not make this change because ns16550 is also used by non-DM
> platforms. Since OMAP_SERIAL is DM specific, converting  this #ifdef to
> OMAP_SERIAL would break non DM platforms. I guess I should still add ||
> OMAP_SERIAL. Ill post a v2 for 956252.

What are the non-DM serial users at this point?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180824/db82b28d/attachment.sig>

  reply	other threads:[~2018-08-24 14:55 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-21 14:30 [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform Lokesh Vutla
2018-08-21 14:30 ` [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs Lokesh Vutla
2018-08-24 14:10   ` Tom Rini
2018-08-24 14:51     ` Lokesh Vutla
2018-08-24 14:55       ` Tom Rini [this message]
2018-08-24 15:14         ` Lokesh Vutla
2018-08-24 15:21           ` Tom Rini
2018-08-21 14:30 ` [U-Boot] [PATCH 2/8] arm: K3: Add support for AM654 SoC definition Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-24 14:58     ` Lokesh Vutla
2018-08-24 15:01       ` Tom Rini
2018-08-21 14:30 ` [U-Boot] [PATCH 3/8] arm: K3: Update _start instruction Lokesh Vutla
2018-08-21 14:30 ` [U-Boot] [PATCH 4/8] arm: K3: am654: Add support for boot device detection Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-24 14:58     ` Lokesh Vutla
2018-08-21 14:30 ` [U-Boot] [PATCH 5/8] arm: K3: am654: Unlock control module registers during init Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:30 ` [U-Boot] [PATCH 6/8] armv8: K3: am654: Add custom MMU support Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:30 ` [U-Boot] [PATCH 7/8] armv8: K3: am654: Introduce FIT generator script Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-24 14:59     ` Lokesh Vutla
2018-08-21 14:30 ` [U-Boot] [PATCH 8/8] armv8: K3: am654: Add support for generating build targets Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-26  6:11 ` [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform Alexander Graf
2018-08-27  9:31   ` Lokesh Vutla
2018-08-27  9:52     ` Alexander Graf
2018-08-27 10:07       ` Lokesh Vutla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180824145511.GA26633@bill-the-cat \
    --to=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox