From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 19/25] spl: Allow mailbox drivers to be used within SPL
Date: Tue, 21 Aug 2018 20:01:57 +0530 [thread overview]
Message-ID: <20180821143203.29142-20-lokeshvutla@ti.com> (raw)
In-Reply-To: <20180821143203.29142-1-lokeshvutla@ti.com>
Add an option for building mailbox drivers within SPL.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
common/spl/Kconfig | 8 ++++++++
drivers/Makefile | 1 +
drivers/mailbox/Makefile | 2 +-
3 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 11c2c0133f..67275eb39d 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -430,6 +430,14 @@ config SPL_LIBGENERIC_SUPPORT
boards. Enable this option to build the code in lib/ as part of an
SPL build.
+config SPL_DM_MAILBOX
+ bool "Support Mailbox"
+ help
+ Enable support for Mailbox within SPL. This enable the inter
+ processor communication protocols tobe used within SPL. Enable
+ this option to build the drivers in drivers/mailbox as part of
+ SPL build.
+
config SPL_MMC_SUPPORT
bool "Support MMC"
depends on MMC
diff --git a/drivers/Makefile b/drivers/Makefile
index d296354b3c..c0124765db 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
+obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
ifndef CONFIG_TPL_BUILD
ifdef CONFIG_SPL_BUILD
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 4ac85d412f..243ff6f3ce 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -2,7 +2,7 @@
#
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_DM_MAILBOX) += mailbox-uclass.o
+obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox-uclass.o
obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox.o
obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox-test.o
obj-$(CONFIG_TEGRA_HSP) += tegra-hsp.o
--
2.18.0
next prev parent reply other threads:[~2018-08-21 14:31 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-21 14:31 [U-Boot] [PATCH 00/25] [2/3] Initial support Texas Instrument's AM654 Platform Lokesh Vutla
2018-08-21 14:31 ` [U-Boot] [PATCH 01/25] firmware: Add basic support for TI System Control Interface (TI SCI) protocol Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-24 15:00 ` Lokesh Vutla
2018-08-21 14:31 ` [U-Boot] [PATCH 02/25] firmware: ti_sci: Add support for board configuration Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 03/25] firmware: ti_sci: Add support for device control Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 04/25] firmware: ti_sci: Add support for clock control Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 05/25] firmware: ti_sci: Add support for reboot core service Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 06/25] firmware: ti_sci: Add support for processor control services Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 07/25] dm: firmware: Automatically bind child devices Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 08/25] dm: reset: Update uclass to allow querying reset status Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 09/25] reset: Extend reset control with an optional data field Lokesh Vutla
2018-08-24 14:11 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 10/25] reset: Introduce TI System Control Interface (TI SCI) reset driver Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-24 14:42 ` Dr. Philipp Tomsich
2018-08-24 15:54 ` Andreas Dannenberg
2018-08-24 16:00 ` Dr. Philipp Tomsich
2018-08-24 16:28 ` Andreas Dannenberg
2018-08-27 3:26 ` Kever Yang
2018-08-27 16:06 ` Andreas Dannenberg
2018-08-28 9:12 ` Lokesh Vutla
2018-08-27 6:02 ` Lokesh Vutla
2018-08-21 14:31 ` [U-Boot] [PATCH 12/25] clk: Extend clock control with an optional data field Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 13/25] clk: Introduce TI System Control Interface (TI SCI) clock driver Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 14/25] power domain: Add support for multiple powerdomains per device Lokesh Vutla
2018-08-22 9:21 ` Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 15/25] power domain: Introduce TI System Control Interface (TI SCI) power domain driver Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 16/25] sysreset: Add TI System Control Interface (TI SCI) sysreset driver Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 17/25] mailbox: Allow attaching private data for mbox_chan Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 18/25] mailbox: Introduce K3 Secure Proxy Driver Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` Lokesh Vutla [this message]
2018-08-24 14:12 ` [U-Boot] [PATCH 19/25] spl: Allow mailbox drivers to be used within SPL Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 20/25] remoteproc: Allow for individual remoteproc initialization Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 21/25] remoteproc: Introduce K3 system controller Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-24 15:02 ` Lokesh Vutla
2018-08-21 14:32 ` [U-Boot] [PATCH 22/25] remoteproc: Introduce K3 remoteproc driver Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:32 ` [U-Boot] [PATCH 23/25] spl: Allow remoteproc drivers to be used within SPL Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:32 ` [U-Boot] [PATCH 24/25] mmc: k3_arasan: Add sdhci driver support for K3 family SoCs Lokesh Vutla
2018-08-24 14:12 ` Tom Rini
2018-08-21 14:32 ` [U-Boot] [PATCH 25/25] gpio: do not include <asm/arch/gpio.h> for ARCH_K3 Lokesh Vutla
2018-08-24 14:13 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180821143203.29142-20-lokeshvutla@ti.com \
--to=lokeshvutla@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox