U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/25] firmware: Add basic support for TI System Control Interface (TI SCI) protocol
Date: Fri, 24 Aug 2018 20:30:59 +0530	[thread overview]
Message-ID: <465c17ad-b60f-7477-0f30-8f7784f9afb3@ti.com> (raw)
In-Reply-To: <20180824141125.GR26633@bill-the-cat>



On Friday 24 August 2018 07:41 PM, Tom Rini wrote:
> On Tue, Aug 21, 2018 at 08:01:39PM +0530, Lokesh Vutla wrote:
> 
>> Texas Instrument's System Control Interface (TI SCI) message protocol is
>> used in Texas Instrument's System on Chip (SoC) such as those in the K3
>> family AM654 SoC to communicate between various compute processors with
>> a central system controller entity.
>>
>> The TI SCI message protocol provides support for management of various
>> hardware entities within the SoC. Add support driver to allow
>> communication with system controller entity within the SoC using the
>> mailbox client.
>>
>> This is mostly derived from the TI SCI driver in Linux located at
>> drivers/firmware/ti_sci.c.
> 
> Since K3 support for the kernel is also being posted now, please make
> sure any feedback to ti_sci there for K3 is worked in here as well when
> applicable, thanks!

ti_sci linux driver is already upstreamed and this is a port of the
upstream driver.



> 
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> Signed-off-by: Nishanth Menon <nm@ti.com>
>> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
> 
> Content wise, seems fine:
> 
> Reviewed-by: Tom Rini <trini@konsulko.com>
> 
> [snip]
>> +++ b/include/linux/soc/ti/ti_sci_protocol.h
>> @@ -0,0 +1,69 @@
>> +/*
>> + * Texas Instruments System Control Interface Protocol
>> + * Based on include/linux/soc/ti/ti_sci_protocol.h from Linux.
>> + *
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + *	Nishanth Menon
>> + *	Lokesh Vutla <lokeshvutla@ti.com>
>> + *
>> + * SPDX-License-Identifier:	GPL-2.0+
>> + */
> 
> Since you've got one here, please run checkpatch.pl on the whole series
> to check for other places where the SDPX header isn't in the right spot
> (and of course other style/etc problems checkpatch complains about).
> 

ahh my bad. Will fix it everywhere.

Thanks and regards,
Lokesh

  reply	other threads:[~2018-08-24 15:00 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-21 14:31 [U-Boot] [PATCH 00/25] [2/3] Initial support Texas Instrument's AM654 Platform Lokesh Vutla
2018-08-21 14:31 ` [U-Boot] [PATCH 01/25] firmware: Add basic support for TI System Control Interface (TI SCI) protocol Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-24 15:00     ` Lokesh Vutla [this message]
2018-08-21 14:31 ` [U-Boot] [PATCH 02/25] firmware: ti_sci: Add support for board configuration Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 03/25] firmware: ti_sci: Add support for device control Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 04/25] firmware: ti_sci: Add support for clock control Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 05/25] firmware: ti_sci: Add support for reboot core service Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 06/25] firmware: ti_sci: Add support for processor control services Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 07/25] dm: firmware: Automatically bind child devices Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 08/25] dm: reset: Update uclass to allow querying reset status Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 09/25] reset: Extend reset control with an optional data field Lokesh Vutla
2018-08-24 14:11   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 10/25] reset: Introduce TI System Control Interface (TI SCI) reset driver Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-24 14:42     ` Dr. Philipp Tomsich
2018-08-24 15:54       ` Andreas Dannenberg
2018-08-24 16:00         ` Dr. Philipp Tomsich
2018-08-24 16:28           ` Andreas Dannenberg
2018-08-27  3:26           ` Kever Yang
2018-08-27 16:06             ` Andreas Dannenberg
2018-08-28  9:12               ` Lokesh Vutla
2018-08-27  6:02       ` Lokesh Vutla
2018-08-21 14:31 ` [U-Boot] [PATCH 12/25] clk: Extend clock control with an optional data field Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 13/25] clk: Introduce TI System Control Interface (TI SCI) clock driver Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 14/25] power domain: Add support for multiple powerdomains per device Lokesh Vutla
2018-08-22  9:21   ` Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 15/25] power domain: Introduce TI System Control Interface (TI SCI) power domain driver Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 16/25] sysreset: Add TI System Control Interface (TI SCI) sysreset driver Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 17/25] mailbox: Allow attaching private data for mbox_chan Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 18/25] mailbox: Introduce K3 Secure Proxy Driver Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 19/25] spl: Allow mailbox drivers to be used within SPL Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 20/25] remoteproc: Allow for individual remoteproc initialization Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:31 ` [U-Boot] [PATCH 21/25] remoteproc: Introduce K3 system controller Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-24 15:02     ` Lokesh Vutla
2018-08-21 14:32 ` [U-Boot] [PATCH 22/25] remoteproc: Introduce K3 remoteproc driver Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:32 ` [U-Boot] [PATCH 23/25] spl: Allow remoteproc drivers to be used within SPL Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:32 ` [U-Boot] [PATCH 24/25] mmc: k3_arasan: Add sdhci driver support for K3 family SoCs Lokesh Vutla
2018-08-24 14:12   ` Tom Rini
2018-08-21 14:32 ` [U-Boot] [PATCH 25/25] gpio: do not include <asm/arch/gpio.h> for ARCH_K3 Lokesh Vutla
2018-08-24 14:13   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=465c17ad-b60f-7477-0f30-8f7784f9afb3@ti.com \
    --to=lokeshvutla@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox